Table of Contents
Advertisement
E121887
1.
Install the locking wheel nut key.
2. Slacken the wheel nuts.
3. Install the jack to the flange.
4. Extend the jack until the base of the
jack is flat on the ground, vertically
below the jacking point.
5. Jack up the vehicle until the tyre is clear
of the ground.
6. Remove the wheel nuts and the wheel.
Installing a road wheel
WARNINGS
Use only approved wheel and tyre
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical Specifications (page 125).
Wheels and Tyres
1
2
120
WARNINGS
Do not fit run flat tyres on vehicles
that were not originally fitted with
them. Please contact your dealer for
more details regarding compatibility.
Make sure that the arrows on
directional tyres point in the direction
of rotation when the vehicle is
moving forwards. If you have to fit a spare
wheel with the arrows pointing in the
opposite direction, have the tyre refitted
in the correct direction by a properly
trained technician.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with steel
wheels.
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the
wheel nuts are against the wheel.
1.
Install the wheel.
2. Install the wheel nuts finger tight.
3. Install the locking wheel nut key.
3
1
4
E90589
4. Partially tighten the wheel nuts in the
sequence shown.
2
Advertisement
Table of Contents
