Table of Contents
Advertisement
PRINCIPLE OF OPERATION
Voice recognition enables operation of the
audio system without the need to divert
your attention from the road ahead in order
to change settings, or receive feedback
from the system.
Whenever you issue one of the defined
commands with the system active, the
voice recognition system converts your
command into a control signal for the
audio system. Your inputs take the form
of dialogues or commands. You are guided
through these dialogues by
announcements or questions.
Please familiarise yourself with the
functions of the audio system before using
voice recognition.
Note: If the Bluetooth and voice control is
used for an extended period of time when
the vehicle is stationary, make sure that the
engine is running to avoid draining the
battery.
Supported commands
The voice control system allows you to
control the following vehicle functions:
phone
radio
CD Player
climate control
navigation system.
Note: The voice control system is language
specific. If you require the system to operate
in another language please consult your
dealer.
System response
As you work through a voice session the
system will prompt you with a beep tone
each time the system is ready to proceed.
Voice control
Do not try to give any commands until the
beep tone has been heard. The voice
control system will repeat each spoken
command back to you.
If you are not sure how to continue say
"HELP" for assistance or "CANCEL" if you
do not wish to continue.
The "HELP" function provides only a
subset of the available voice commands.
Detailed explanations of all possible voice
commands can be found on the following
pages.
Voice commands
All voice commands should be given using
a natural speaking voice, as if speaking to
a passenger or on the phone. Your voice
level should be dependant on the
surrounding noise level inside or outside
the vehicle but do not shout.
Name tag
The name tag functionality can support
the phone, audio and navigation features
by using the "STORE NAME" function.
Store up to 20 name tags per function.
The average recording time for each
name tag is approximately 2-3
seconds.
USING VOICE CONTROL
System operation
The order and content of the voice controls
are given in the following lists. The tables
show the sequence of user voice
commands and system responses for each
available function.
<> indicates a number or stored name tag
to be inserted by the user.
163
Advertisement
Table of Contents
