Table of Contents
Advertisement
REACH ENC1200
User Manual
The encoder rate code is 128K – 20M adjustable, while the quality mode is 10-90
adjustable.
The video frame rate is 1-30 frames adjustable.
Input: three input modes (DVI/SDI/AUTO) can be selected according to the actual use
situation.
Audio setting
The audio sampling frequency, audio bandwidth and audio input mode of HD video can
be adjusted.
Sampling frequency: 44.1Khz and 48KHz are selectable.
Audio bandwidth: 64Kbps, 96Kbps and 128Kbps are selectable.
Line input or microphone may be selected for the audio.
Subtitles setting
You can set the coordinate position and content of the subtitles and select if the time is
display as well.
5.3 System Setting
Click " Configure", you may change the password of the admin user, upgrade the system
and change the IP address of encoder.
Copyright ©
Shenzhen Reach IT Co., Ltd.
14 / 16
Advertisement
Table of Contents
