Care & Maintenance; Cleaning; Storing; Resetting The Motor Thermostat - Ninja AMZ012BL Instructions Manual

CARE &
MAINTENANCE

CLEANING

1
Separate all parts.
2 Wash all containers in warm, soapy water
with a soft cloth.
3 Hand Washing
Wash blade assemblies and Blade Discs
in warm, soapy water using a dishwashing
utensil with a handle or the provided
cleaning brush to avoid direct contact with
the blades. Exercise care when handling
blade assemblies as the blades are sharp.
Thoroughly rinse and air-dry all parts.
Dishwasher
All attachments are dishwasher safe. It is
recommended that the lids, containers,
Blade Discs, and blade assemblies be placed
on the top rack of the dishwasher ONLY.
Ensure that blade assemblies are removed
from their containers before placing in the
dishwasher. Exercise care when handling
blade assemblies.
4 Wipe the motor base with a clean, damp
cloth. Allow time to dry before operation.

STORING

Wrap the power cord around the cord wrap
on the back of the motor base. Store the unit
upright and store all blade assemblies inside or
attached to their respective containers with their
lids locked into place.
DO NOT store blended or unblended
ingredients in the High-Speed Blender
with the Pro Extractor Blades
attached.
DO NOT stack items on top of the containers.
Store any remaining attachments alongside the
appliance or in a cabinet where they will not be
cup
™
assembly
®
damaged or create a hazard.

RESETTING THE MOTOR THERMOSTAT

This appliance features a unique safety system
that prevents damage to the motor and drive
system should you inadvertently overload the
appliance. If the appliance is overloaded, the
motor will be temporarily disabled. Should this
occur, follow the reset procedure below.
1
Unplug the appliance from the
electrical outlet.
2 Allow the appliance to cool for
approximately 15 minutes.
3 Remove the container lid and blade assembly.
Empty the container and ensure no ingredients
were jamming the blade assemblies.
4 Reset the unit in accordance with the
applicable instructions for the container
and blade type.
IMPORTANT: Ensure that maximum
capacities are not exceeded. This is the
most typical cause of appliance overload.
If your unit needs servicing, please call
Customer Service at 1-877-646-5288.
n i n j a k i tc h e n . c o m
30