Ninja AMZ012BL Instructions Manual page 21

4 Place the Collecting Bowl inside the
Spiralizer Bowl, aligning it over the gear post.
5 Choose your Blade Disc, making sure to
handle it carefully.
6 Install the Blade Disc onto the top of the
Collecting Bowl. The rim of the Blade Disc
should sit flush against the top of the bowl,
and the tabs on the sides of the Blade
Discs must align with the slots on the top
of the Collecting Bowl.
7 Assemble the Feed Chute Lid on top of the
Spiralizer Bowl. Turn the lid clockwise onto
the Spiralizer Bowl, aligning the gray tabs
on the lid with the front of the bowl. When
the unit is connected to power and the
container is correctly assembled onto the
motor base, the START/STOP button will
illuminate, indicating that the unit is ready
for use.
n i n j a k i tc h e n . c o m
20