Planning A Route Using Step-By-Step Search; Using Destination Prediction - TomTom Rider 400 User Manual

Bus station
Toll plaza
Rest area

Planning a route using step-by-step search

Using destination prediction

What is destination prediction?
Your Rider can learn your daily driving habits to saved favorite Places and it can also suggest
destinations when you start the device from sleep mode, for example, when driving to Work in the
morning.
Getting ready for destination prediction
Before you get your first suggested destination, your device needs some time to learn about your
habits. The more regularly you drive with your Rider, the faster you will get suggestions and the more
accurate the suggested destinations will be.
To receive predicted destinations, you need to do the following:

Destination prediction is switched ON by default, but if it has been switched off go to
System > Your information and privacy, switch on Keep trip history on this device for op-
tional features.

Make sure no route is planned.

If your device has voice control, switch voice control ON. Make sure that your volume is not muted
and is set higher than 20%.

Do some driving for a few days, planning routes to your favorite My Places destinations.
Using destination prediction
Important: If your device has voice control, you can say "Yes" or "No" or select the Yes or No button.
If your device prompts "Going to X?," where X is a destination, you have 12 seconds to respond yes or
no.
Tip: If you don't respond yes or no, your Rider assumes a yes.
To respond yes, say "Yes" or select Yes. Your device plans a route to your destination.
To respond no, say "No", select No, or tap the screen to return to the map.
Switching destination prediction on or off
You can turn destination prediction on or off at any time. See
your device has voice control) for information on how to switch this feature on or off.
City center
Electric/hybrid car charging
stations
Truck stop
Route planning
88
Settings >
and Voice Control (if