The Guidance View - TomTom Rider 400 User Manual

10. Safety cameras on your route. Select a
11. Route bar. The route bar

The guidance view

The guidance view is used to guide you along the route to your destination. The guidance view is
shown when you start driving. You see your current location and details along your route, including 3D
buildings in some cities.
Note: 3D buildings in guidance view are not available on all devices.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of
travel, change the 2D and 3D default
Tip: When you have planned a route and the 3D guidance view is shown, select the switch view
button to change to the
When your Rider starts after sleeping and you have a route planned, you are shown the guidance view
with your current location.
1. Switch view button. Select the switch view button to change between the map view and the
guidance view.
When in guidance view, if you are driving, the small arrow rotates to indicate your direction of
travel relative to north, with north being up.
Tip: The compass direction you are driving is shown in the switch view button below the small
compass arrow, for example, NE for North East. These compass directions automatically appear
when driving in North America and disappear if you leave North America.
safety camera
is shown when you have planned a route.
settings.
map view and use the interactive features.
to display information about that camera.
35