Planning A Route To A Poi - TomTom Rider 400 User Manual

The city name is shown in the right side of the search input box, and the city center POI is shown
below in the right-hand column.
6. Select the city center POI.
The city center location is shown on the map.
7. Select Drive/Ride, depending on which device you are using.
A route is planned and then guidance to your destination begins. As soon as you start driving, the
guidance view is shown automatically.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the
time difference in hours and half hours in the
arrival is the local time at your destination.
Tip: You can add a stop to a route
Tip: You can save a route using

Planning a route to a POI

QUICK SEARCH ONLY
Important: In the interest of safety and to avoid distractions while you are driving, you should always
plan a route before you start driving.
To plan a route to a POI type or a specific POI (Point of Interest) using search, do the following:
1. Select the Main Menu button to open the Main Menu.
arrival information
that you have already planned.
My Routes.
67
panel. The estimated time of