Types Of Route; Avoiding Features On A Route - TomTom Rider 400 User Manual

Tip: Information from the TomTom
that is 50% longer in time than the original route is not shown.
5. Select your chosen route by tapping on the time balloon.
Guidance to your destination begins. As soon as you start driving, the
automatically.
Note: There are two other ways of finding alternative routes:
1. Select Current Route in the Main Menu, followed by Find Alternative.
2. If your device has voice control, say "Find alternative".

Types of route

Select Change Route Type to change the type of route planned to your current destination. Your
route is recalculated using the new route type.
You can select the following types of route:

Fastest route - the fastest route to your destination. Your route is constantly checked taking into
account the traffic conditions.

Shortest route - the shortest route to your destination. This may take much longer than the
fastest route.

Most eco-friendly route - the most fuel-efficient route.

Avoid interstate highways - this type of route avoids all highways.

Winding route - the route with the most turns.
Note: Winding routes are only available for TomTom Rider navigation devices.
You can set the default route type in the

Avoiding features on a route

You can choose to avoid some features that are on your currently planned route. You can avoid the
following route features:

Toll Roads

Ferries and car shuttle trains

Carpool Lanes

Unpaved Roads
Note: Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV lanes) and are
not present in every country. To travel on these lanes, you may need to have more than one person
in the car, for example, or the car may need to use environmentally-friendly fuel.
Traffic is used when calculating alternative routes. Any route
Settings Menu.
108
guidance view is shown