Advanced Lane Guidance; Time-Dependent Speed Limits - TomTom Rider 400 User Manual

3. Select Avoid in the pop-up menu.
A new route is found that avoids the traffic jam.
Avoiding a traffic jam using the map
1. On the map view, zoom in and select the traffic jam that is on your route.
The traffic jam with an information panel is shown on the map.
2. Select the pop-up menu button.
3. Select Avoid.
A new route is found that avoids the traffic jam.

Advanced Lane Guidance

Note: Lane guidance is not available for all intersections or in all countries.
Advanced Lane Guidance helps you prepare for highway exits and junctions by showing the correct
driving lane for your planned route.
As you approach an exit or junction, the lane you need is shown on the screen.
Tip: To close the lane image, select anywhere on the screen.
You can choose to see a split screen with the Guidance view on the left and lane guidance on the right
or a full screen with lane guidance only. You can also switch off lane guidance. Go to Appearance in
Settings to change the Highway exit previews setting.

Time-dependent speed limits

Some speed limits change depending on the time of day. For example, you may see the speed limit
near schools decrease to 40 km/h or 25 mph in the morning from 08:00 a.m. - 09:00 a.m. and in the
afternoon from 3:00 p.m. - 4:00 p.m. Where possible, the speed limit shown in the speed panel
changes to show these variable speed limits.
Some speed limits change depending on driving conditions. For example, the speed limit will decrease
if there is heavy traffic, or the weather conditions are bad. These variable speed limits are not shown
in the speed panel. The speed shown in the speed panel is the maximum speed limit allowed in good
driving conditions.
Important: The speed limit shown in the speed panel is only an indication. You must always obey the
actual speed limit for the road you are on and the conditions you are driving in.
47