Cassette Recorder - Philips AZ5130 Expanium Manual

CASSETTE RECORDER

CASSETTE PLAYBACK
1. Set the source selector to TAPE/OFF.
2. Press STOP•OPEN 9 / to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY 1 and playback will start.
5. Adjust the sound using the VOLUME and DBB controls.
6. For brief interruptions, press PAUSE ;. Press PAUSE ; again to
resume playback.
7. By pressing 5 or 6,fast winding of the tape is possible in both
directions.
8. To stop playback, press STOP•OPEN 9 /
™ The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/OFF position (with the
cassette keys are released) to switch off the set.
CASSETTE RECORDING
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II)
or METAL (IEC IV) type cassettes. For recording you should
use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
avoid jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DBB controls will not affect the recording in progress.
• No recording will take place during the 3 seconds, when the
leader tape passes the recorder heads.
Notes : -No recording will take place during the 7 seconds in the
beginning of the tape.
• To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in
front of you and break out the left tab. Recording on this side is no longer possible.
18
S
IC B A S
1