6 239PC SOFTWARE
This is indicated in the following dialog box. Click OK to continue.
4. The Load Firmware dialog box appears. The firmware file name has the following format:
64 D 250 C4 000
6
5. Locate the firmware file to be loaded into the relay and click OK to proceed.
6. The following dialog box will appear; select
•
Yes to proceed
•
No to load a different firmware file
•
Cancel to abort the process
6-10
Courtesy of NationalSwitchgear.com
Modification number (000 = none)
For GE Power Management use only
Product firmware revision (e.g. 2.50). On the 239, this number is
found in Actual Values page A3 under FIRMWARE VERSION/MAIN
PROGRAM VER
Required product hardware revision. This letter must match
the first character of the serial number located on the product
label on the back of the relay
Product Name (64 = 239 Relay)
239 Motor Protection Relay
6 239PC SOFTWARE
GE Multilin