Rename Poi; Edit Description; Edit Location By Map; Edit Location By Grid - satmap active 20 Full User Manual

11. POIs (Points of Interest) (... cont)
11.8 Rename POI
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Rename)
When a POI is created it is called 'POI 1' by default
(or similar, depending on the number of existing
OOIs).To rename it, highlight the POI in the
Folders, press Edit, then Rename
appears. Use the rocker pad to rename the POI
(section 9.00).
11.9 Edit Description
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit Description)
Highlight Edit Description, then either press the
Edit button or centre press the rocker pad to access
.
the keypad (section 9.00)
Operate the keypad to input comments describing
the POI and press Done when finished. The screen
will return to the EDIT POI menu.
The description can be viewed on the POI details
screen.
Note: The 'Edit Description' option is only available if
the existing description has 128 characters or less (e.g.
externally imported descriptions from geocaches etc.
with more than 128 characters cannot be edited).
Software v3.0.11065
11.10 Edit Location by Map
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit Location by Map)
You are in edit mode when a red cross appears
inside the orange locator circle. A copy of the POI
OOI icon appears just inside the locator circle. Drag the
POI to a new location and centre press the rocker
.
The keypad
pad to confirm the placement.
Note: This mode only allows you to edit the specific
POI selected. Nothing else on the map is editable,
(i.e. the remove POI button 'x' does not have a
function on this screen).
Press the GPS Map
screen.
11.11 Edit Location by Grid
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Edit → Edit Location by Map)
Highlight Edit Location by Grid
menu if you want to edit the POI by changing the
grid reference values. This will take you to the
SETTING screen where you can use the rocker pad
to move left/right to toggle between boxes. Move
the rocker pad up/down to change the box entries.
Pressing Next
OSGB). Select
the EDIT POI menu.
button to return to the last map
in the EDIT POI
will move between rows (except with
Done when complete to go back to
77
POI
Edit POI
location by map
© Satmap Systems Ltd 2017
Locator circle
displays a
copy of the
POI icon
being edited