Add Poi By Grid Reference; Add Poi By Postcode (Uk Only); Add Poi In A Specific Folder; Poi Details Screen - satmap active 20 Full User Manual

11. POIs (Points of Interest) (... cont)
11.3 Add POI by Grid Reference
(GPS MAP → MAIN MENU → OOI Menu → Add POI
by Grid Ref)
To create a POI by grid reference, select
by Grid Ref from the OOI Menu and press
centre press the rocker pad. This will take you to the
SETTING screen where you will be able to create a
POI using a grid reference.
To add a location entry, move the rocker pad left/
right to toggle between boxes. Move the rocker pad
up/down to change the box entries.
Under the grid reference boxes are the 'conversions'
showing the initial grid references. Once you
begin changing the grid reference (i.e. moving the
rocker pad up/down to change the entries), these
conversion figures are grayed out and the
Convert
button becomes bold. Pressing
the conversions.
11.4 Add POI by Postcode
(UK only)
(GPS MAP → MAIN MENU → OOI Menu → Add POI
by Postcode)
POIs can be added by postcode for some units in
the UK. Select Add POI by Postcode
Menu and press Select or centre press the rocker
pad. This will take you to the keypad. Enter the
desired postcode and press Done to go to the
POI screen.
Follow the steps as described in section 14.01
POI by Map') to create your POI on the map.
11.5 Add POI in a Specific Folder
(MAIN MENU → OOI Menu → OOI Folders → specific
folder → final subfolder → Back → Add POI by Map or
Add POI by Grid Reference or Add POI by Postcode)
This will add the POI to the last visited folder.
Note: Folders are created using SatSYNC and must
contain at least one OOI or route to be visible on the
unit. (See SatSYNC User Guide for more information).
Software v3.0.11065
11.6 POI Details Screen
(GPS MAP → MAIN MENU → OOI Menu → OOI
Folders → Select POI → Show Details)
Add POI
Alternative access:
Select or
(GPS MAP/PLANNING → click on POI → Choose
Information Type → select POI via centre press →
POI details)
This screen summarises details of the POI and is
titled by the current POI name. POIs are date and
time 'stamped', and the following information is
given:
• Name of the POI
• Grid reference
• Distance and bearing from current location
• Elevation
• POI icon
Convert
• POI description (if added)
will update
The highlighted green 'eye' icon indicates the POI is
visible on the map. When invisible, the 'eye' icon is
highlighted in red with a red line through it.
from the OOI
Add
('Add
75
Set location by
Grid Reference
Basic POI
detail
© Satmap Systems Ltd 2017