Configuring This Machine; Checklist - Konica Minolta bizhub C658 Quick Start Manual

3

Configuring this machine

The following settings are required.
-
Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings], then tap [OK].
-
Select [ON] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Direct Hosting
Setting], then tap [OK].
- Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same
date/time and time zone between this machine and your computer, then tap [OK].

Checklist

While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
3-28
Entry column
IP address to which the scanned data is sent
Scan-to-Send function
Detail
page 3-29
bizhub C658/C558/C458/C368/C308/C258
3.2