Assigning Functions To Pedals And Performance Pads (Pedal Setting/User Functions) - Roland KR-15 Owner's Manual

■ Assigning Functions to Pedals
and Performance Pads (Pedal
Setting/User Functions)
You can assign a variety of functions to the left and center
pedals and to the performance pads.
You can call up the assigned functions just by pressing the
corresponding pedal or pad.
❍ Assigning Functions to Pedals
At Step 3 "Procedure" (p. 155), touch <Pedal Setting>.
fig.d-pedalset.eps_50
Touch to assign functions to each of the pedals.
* Pressing the One Touch Program [Piano] button restores the
piano performance functions to the pedals (p. 21).
❍ Assigning Functions to Performance Pads
1.
Press the [User Function] button and watch the
indicator light up.
A screen like the one shown below appears.
fig.d-usrfunc.eps_50
2.
Touch to assign functions to each of the
Performance Pads.
→ If you set the pedal as a dedicated switch for selecting User
Programs, the function assigned to the pedal cannot be used.
Refer to "Using the Pedal to Switch User Programs" (p. 126).
Chapter 9 Various Settings
❍ Functions that can be assigned (Pedals,
Performance Pads)
Function
Toggles the Leading Bass function* on or
off. The function stays on as long as the
Leading pedal to which this is assigned is pressed.
When assigned to a Performance Pad, this
Bass
is alternately switched on and off each time
the pad is pressed.
Only the accompaniment's rhythm part is
played. The next time you specify a chord
No Chord with the keyboard, the No Chord function
is cancelled, and all of the accompaniment
parts are played.
During the performance of Automatic
Break Accompaniment, the accompaniment
stops for one measure only.
Fill In to Performs the same function as the Fill In
Variation [To Variation] button (p. 69).
Performs the same function as the Fill In
Fill In to
Original [To Original] button (p. 69).
A fill-in is inserted, but the accompaniment
Fill In
pattern after that doesn't change.
This plays a fill-in half a measure long,
Half Fill In
then switches to the Variation
Variation
accompaniment pattern.
This plays a fill-in half a measure long,
Half Fill In
then switches to the Original
Original
accompaniment pattern.
Original/ This changes the accompaniment pattern
Variation without inserting a fill-in.
When this function is used during
Arranger Automatic Accompaniment, the
Reset accompaniment returns to the beginning of
the Division (p. 58).
Performs the same function as the [Intro/
Intro 1/
Ending] button (p. 66). Intro 1 and Ending
Ending 1
1 are played.
Performs the same function as the [Intro/
Intro 2/
Ending] button (p. 66). Intro 2 and Ending
Ending 2
2 are played.
Arranger Performs the same function as the [Start/
Start/Stop Stop] button (p. 66).
Orchestrat This changes the accompaniment to a more
elavorate arrangement (p. 70).
or Up
Orchestrat Changes the accompaniment to a simpler
or Down arrangement (p. 70).
Turns the Melody Intelligence function on
Melody
Intelligence and off (p. 72).
Explanation
157