Zhone zNID-GPON-2403 Hardware Installation Manual page 23

Table 2: zNID 24xx common specifications (Continued)
Specifications
Protocol Support
Values
•
GPON uplink
– ITU-T G.984 (GPON)
– Multiple T-CONTS per device
– Multiple GEM Ports per device
– 1:1 mapping of GEM ports into T-CONTS with priority queue based scheduling
– Activation with automatic discovered SN and password in conformance
with ITU-T G.984.3
– AES-128 Decryption with key generation and switching
– FEC (Forward Error Correction)
– 802.1p mapper service profile on U/S
– Mapping of GEM Ports into a T-CONT with priority queues based scheduling
– Support for Multicast GEM Port
•
Ethernet/IP
– Bridging and switching (802.1D / 802.1 Q)
– Eight traffic classes with 802.1p
– 802.3n flow control
– MAC address entries
For OMCI-configured traffic flows, no limit (no bridge table)
For Bridged VLANs, configured via Web UI or CLI in RG Mode, 4096 bridge
table entries are supported. (only the most recent 100 entries are displayed).
– VLAN tagging / untagging
– VLAN stacking (Q-in-Q)
– MAC limiting
– 802.1x Ethernet Authentication
– PPPoE client
•
DHCP server, DHCP client
•
FTP, TFTP
•
Telnet
•
HTTP
•
SSH
•
SNMP
•
NAT
•
QoS
– 802.1P/Q priorization
– Diffserv (RFC2474, RFC2475)
– Traffic shaping – bandwidth management and rate limiting
•
Firewall and Security
zNID 24xx models
zNID Hardware Installation Guide
23