Zhone Hotwire ReachDSL 6350-A4 Installation Instructions Manual
Zhone Hotwire ReachDSL 6350-A4 Installation Instructions Manual

Zhone Hotwire ReachDSL 6350-A4 Installation Instructions Manual

Zhone 6350-a4: installation instruction

Advertisement

Quick Links

®
Hotwire
ReachDSL
Model 6350-A4

Installation Instructions

Document Number 6350-A2-ZN12-30
December 2005
Contents
................................................................................................................................
.....................................................................................................................
............................................................................................................................... 10
......................................................................................................................... 11
............................................................................................................................... 16
...................................................................................................................... 20
6350-A2-ZN12-30
®
Modem
...........................................................................................
.............................................................................................................. 12
.................................................................................................... 15
........................................................................................................ 18
.................................................................................... 20
................................................................................................................ 20
...............................................................
....................................................................
.......................................................................
...........................................................................
........................................................................... 12
............................................... 14
2
3
4
4
5
6
8
1

Advertisement

Table of Contents
loading

Summary of Contents for Zhone Hotwire ReachDSL 6350-A4

  • Page 1: Table Of Contents

    ReachDSL Model 6350-A4 Installation Instructions Document Number 6350-A2-ZN12-30 December 2005 Contents End User License Agreement (Zhone and Affiliates) Trademarks Package Checklist Wiring and Cables You May Need (not supplied) Installing Additional Phone Filters Installing the Hotwire 6350 ReachDSL Modem Optional ReachDSL Modem Wall Placement Status LEDs ...
  • Page 2: End User License Agreement (Zhone And Affiliates)

    Software; (c) Used so as to circumvent any technological measure included therein or provided by Zhone from time to time to control access to or limit use of the Software; (d) sublicensed, rented, leased or lent to third parties; (e) imported or exported into any jurisdiction except in compliance with all applicable laws of the United States and such jurisdiction;...
  • Page 3: Trademarks

    Limit of Liability. In case of any claim hereunder or related to the Software, neither Zhone nor its Licensors shall be liable for direct damages exceeding the price paid by User for the Software or for special, incidental, consequential or indirect damages, even if advised in advance of the potential thereof.
  • Page 4: Package Checklist

    Package Checklist Verify that your package contains the following: Hotwire 6350 ® ReachDSL Modem Wiring and Cables You May Need (not supplied) The following standard cables and connectors can be used with this product: Standard RJ11 (or RJ14) wall jack for the DSL cabling Power cord with power transformer...
  • Page 5: Installing Additional Phone Filters

    Installing Additional Phone Filters A phone filter is recommended to minimize background noise during a phone conversation on telephones not connected directly to the Hotwire 6350 ReachDSL Modem. If additional telephones in your home or business share the same phone line with the ReachDSL modem, install one phone filter on each telephone.
  • Page 6: Installing The Hotwire 6350 Reachdsl Modem

    Installing the Hotwire 6350 ReachDSL Modem Place the Hotwire 6350 ReachDSL Modem on a flat surface with clearance for the rear connectors. Procedure UNPLUG TELEPHONE. If a telephone is connected at the RJ11 wall jack where the ReachDSL modem will be installed, unplug the telephone line from the wall jack.
  • Page 7: For More Information

    When the power cord is installed, the ReachDSL modem goes through a power-on self-test. The ReachDSL modem hardware installation is now complete. For More Information For more information about the Hotwire DSL systems, visit www.zhone.com. 6350-A2-ZN12-30 PC with Ethernet Network Interface...
  • Page 8: Optional Reachdsl Modem Wall Placement

    Optional ReachDSL Modem Wall Placement The Hotwire 6350 ReachDSL Modem is designed for tabletop placement. The modem can also be mounted on a wall. To mount the modem, you will need: Two slotted-head #6 self-threading screws with plastic anchors Drill and 3/16" drill bit for the plastic anchors Screwdriver A template with the dimensions for the two screws is provided.
  • Page 9: Reachdsl Modem Hardware Template

    ReachDSL Modem Hardware Template 01-17014 6350-A2-ZN12-30...
  • Page 10: Status Leds

    Status LEDs When power is applied, the ReachDSL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics include a power-on self-test during which all of the LEDs turn on for one second. ReachDSL All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below.
  • Page 11: Troubleshooting

    Troubleshooting LED Symptom Action All LEDs are on. If LEDs remain on after ten minutes, the modem is not functional. Contact the service provider. ALM LED remains The power-on self-test may have failed. Unplug the unit and reapply power. If the alarm LED is still on, contact the service provider. ALM and TST LEDs Firmware download may be in progress.
  • Page 12: Increasing The Number Of End-User Systems

    Increasing the Number of End-User Systems A single end-user system is attached to the Hotwire 6350 ReachDSL Modem by using an Ethernet crossover cable. To increase the number of end-user systems, connect all the PCs to an Ethernet hub using a straight-through cable. The Hotwire ReachDSL port card supports 32 hosts/subnets per DSL port and the Hotwire ReachDSL Modem supports up to 256 MAC entries.
  • Page 13 The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — To connect the DSL modem to an Ethernet hub, use the straight-through connection. 8-Pin Straight-through Connection Pin # Function 10BaseT TX D+ 10BaseT TX D– 10BaseT RX D+ 4 & 5 Not used 10BaseT RX D–...
  • Page 14: Technical Specifications For Hotwire 6350 Reachdsl Modem

    Technical Specifications for Hotwire 6350 ReachDSL Modem Item Height x Width x Depth Weight Power Class 2 Transformer normal service input voltage range Approvals FCC Part 15 CISPR 22 Other Certifications Physical Environment Operating temperature Storage temperature Relative humidity Shock and vibration Heat Dissipation Interface Connectors Line Interface...
  • Page 15: Important Safety Instructions

    Important Safety Instructions Read and follow all warning notices and instructions marked on the product or included in the manual. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.
  • Page 16: Compliance

    Compliance CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to electrical equipment designed for use within certain voltage limits, as amended by Directive 93/68/EEC.
  • Page 17: Declaration Of Conformity

    Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Supplier’s Declaration of Conformity Place of Issue:Paradyne Corporation (now Zhone Technologies, Inc.) 8545 126 Avenue North Largo, FL 33773-1502...
  • Page 18: Government Requirements

    Paradyne Corporation, located at the above address, hereby certifies that the Hotwire ® ReachDSL Model Number 6350-A4-200, bearing labeling identification number US:AW2DL03B6350-A4 complies with: the Federal Communications Commission’s (“FCC”) Rules and Regulations 47 CFR Part 68, the Administrative Council on Terminal Attachments (“ACTA”)-adopted technical criteria TIA/EIA/IS-968, “Telecommunications –...
  • Page 19: Notice To Users Of The Canadian Telephone Network

    company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If you experience trouble with this equipment, please contact your sales or service representative (as appropriate) for repair or warranty information. If the product needs to be returned to the company service center for repair, contact them directly for return instructions using one of the methods listed under If the trouble is causing harm to the telephone network, the telephone company may request...
  • Page 20: Contacting Global Service And Support

    Contacting Global Service and Support Contact Global Service and Support (GSS) if you have any questions about this or other Zhone products. Before contacting GSS, make sure you have the following information: Zhone product you are using System configuration Software version running on the system...

Table of Contents