Using Manual Control For Additional Functions - Auerswald VOICEMAIL CENTER 461.2 Operation Manual

Operation via a system telephone

Using manual control for additional functions

Using manual control for additional functions
To access additional functions that are not available in this menu from your system telephone,
you can use the remote control functions described in the Voicemail Center 461.2 user man-
ual on the Auerswald Mega Disk.
You first have to enable "Manual Control" on your system telephone. You then no longer need
to enter the Access Code. Simply enter the function code you require.
System telephone:
e
Y
The display shows "manual
control". You can no longer re-
turn to the previous menu.
N
62
Press the Function key you have set up as
„VoiceMail
F
page 48 ff for a description of how to set up
this key).
Alternatively, access this function via the sec-
ond level (see
A
Lift the receiver.
Press the
level.
Y
Press the
trol.
Use the number keys to enter the function
codes.
B
Replace the receiver to exit the function.
Center: defined"
page 58).
e
Softkey to switch to the second
Softkey to initialise manual con-
(Refer to