Chapter 4. Wireless Access Point Setup; Wireless Settings Wizard - D-Link DSR-150 User Manual

Unified Services Router
Chapter 4.
This router has an integrated 802.11n radio that allows you to create an access point for wireless LAN
clients. The security/encryption/authentication options are grouped in a wireless Profile, and each
configured profile will be available for selection in the AP configuration menu. The profile defines
various parameters for the AP, including the security between the wireless client and the AP, and can
be shared between multiple APs instances on the same device when needed.
Up to four unique wireless networks can be created by configuring multiple "virtual" APs. Each such
virtual AP appears as an independent AP (unique SSID) to supported clients in the environment, but is
actually running on the same physical radio integrated with this router.
You will need the following information to configure your wireless network:

Types of devices expected to access the wireless network and their supported Wi-Fi™ modes

The router's geographical region

The security settings to use for securing the wireless network.

Profiles may be thought of as a grouping of AP parameters that can then be applied to not just one but
multiple AP instances (SSIDs), thus avoiding duplication if the same parameters are to be used on
multiple AP instances or SSIDs.
4.1

Wireless Settings Wizard

Setup > Wizard > Wireless Settings
The Wireless Network Setup Wizard is available for users new to networking. By going through a few
straightforward configuration pages you can enable a Wi-Fi™ network on your LAN and allow
supported 802.11 clients to connect to the configured Access Point.
Wireless Access Point Setup
67
User Manual