Disassembly And Assembly - Sharp AL-1611 Service Manual

[11] DISASSEMBLY AND ASSEMBLY

WARNING:Before performing the disassembly procedure, be sure to
remove the power cord to prevent against an electric shock.
No.
1 High voltage section/Duplex transport section
2 Optical section
3 Fusing section
4 Paper exit section
5 MCU
6 Optical frame unit
7 LSU
8 Tray paper feed section/Paper transport section
9 Manual multi paper feed section
10 Power section
11 SPF section <AL-1622 only>
1. HIGH VOLTAGE SECTION/DUPLEX
TRANSPORT SECTION
No.
A Transfer charger unit
B Charger wire
A. Transfer charger unit
Item
Content
AL-1611/AL-1622 DISASSEMBLY AND ASSEMBLY
B. Charger wire
Installation: The spring tip must be between two reference ribs.
• The charger wire must be free from twist or bending.
• Be sure to put the charger wire in the V groove.
11 - 1