Sharp AL-1611 Service Manual page 45

Main Sub
Contents
code code
26 7 CRUM set value display
10 Model name setting
22 Language setting
30 CE mark conformity control
setting
32 Fan rotation duty change
state setup
38 Cancel of stop at drum life
over
<Not Used>
42 Transfer timing adjustment
Details of operation
The currently set value of CRUM is displayed with the following numbers:
Key operation/Display
0: Not set
1: BTA-A
2: BTA-B
Used to set the model name of the machine used with the following numbers.
After entering the set value, press the start key and the set value is stored.
Key operation/Display
0: AL-1611
1: AL-1622
Used to display the current setting of the language information with the num-
ber at right. After entering the set value, press the start key, and the set value
is stored.
Key operation/Display
0: Japanese
1: English
2: French
3: German
Used to display the current setting of CE mark conformity control with the
number at right. After entering the set value, press the start key, and the set
value is stored.
Key operation/Display
0: CE mark control OFF
1: CE mark control ON
The currently set fan motor rotation duty is displayed with the following num-
bers. After entering the set value, press the start key to store the set value.
Key operation/Display
0: Operating 50%, standby 30%
1: Operating 80%, standby 50%
The currently set value is displayed. After entering the set value, press the
start key to store the set value.
Key operation/Display
0: The machine stops at drum life over.
1: The machine does not stop at drum life over.
After completion of warm up, shading is performed and the currently set trans-
fer timing adjustment value is displayed.
Key operation
Transfer timing adjustment value: Copy quantity keys
"1": 240 ms
"3": 260 ms
"5": 280 ms
"7": 300 ms
"9": 320 ms
AL-1611/AL-1622 SIMULATIONS
8 – 8
3: BTA-C
99: Conv
4: Italian
5: Dutch
6: Swedish
7: Spanish
Initial
Set range
value
0 0 ~ 1
1 0 ~ 7
1 0 ~ 1
0 0 ~ 1
1 0 ~ 1
3 1, 3, 5, 7, 9