Foma PushTalk SH902i Manual

Table of Contents

Quick Links

Download this manual

Manual

for

'05.12

Easy Search/

Table of Contents/

Precautions

Before Using the

FOMA Terminal

Calling/Receiving

Making/Receiving

Videophone Calls

PushTalk

Phonebook

Sound/Screen/

Light Settings

Security Settings

Camera

i-mode/i-motion

Mail

i- ppli

i-Channel

Mobile Wallet/

ToruCa

Full Browser

Displaying/Editing/

Managing Data

Other Useful

Functions

Network Services

Data

Communication

Text Input

Appendix/

Using with External Devices/

Troubleshooting

Index/Quick Manual

Table of Contents

Troubleshooting

Need help?

Do you have a question about the PushTalk SH902i and is the answer not in the manual?

Questions and answers

Summary of Contents for Foma PushTalk SH902i

Page 1 Manual Easy Search/ Table of Contents/ Precautions Before Using the FOMA Terminal ’05.12 Calling/Receiving Making/Receiving Videophone Calls PushTalk Phonebook Sound/Screen/ Light Settings Security Settings Camera i-mode/i-motion Mail i- ppli i-Channel Mobile Wallet/ ToruCa Full Browser Displaying/Editing/ Managing Data Other Useful...
Page 2 Using the FOMA Terminal Because it relies on radio signals, the FOMA terminal cannot be used in places with no signal (such as tunnels, underground, or in buildings), in places with a weak signal or outside the FOMA service area. There may be times when the terminal cannot be used in the upper floors of a building even with no obstructions in sight.
Page 3: Using This Manual
6 Table of contents Search for functions by category. nP. 8 Features Search for new and convenient functions or characteristic functions of the FOMA SH902i. nP. 502 Menu list Menus that appear on the FOMA SH902i are listed. nP. 560 Quick manual The basic functions are explained briefly.
Page 4 (Content differs from actual pages in this manual.) nP. 552 Index Use this when you know the function or service name, or to search for function names that appear on the FOMA SH902i display. P. 416 Page that explains “Timer”...
Page 5 Screens operation.) demonstrating various steps are Necessary shown. Refer to the information, screens while using precautions the FOMA terminal. and other (Text which is input, information for numbers and using settings are functions are examples.) explained. Search by chapter from the index.
Page 6: Easy Search
Easy Search Use this feature to find operations for any function. Changing the display Display features ..... . . 29 (Viewing the display) Setting the clock .
Page 7 Securing the FOMA terminal Keeping phonebook contents secret..124 (Set secret) Locking a handset remotely ... . . 160 (Remote lock all) Locking the side keys ....165 (Side key guard) Rejecting calls without caller ID .
Page 8: Table Of Contents
PushTalk group, Use PushTalk Phonebook to Send PushTalk Transmissions, Delete PushTalk Phonebook Entries, Set PushTalk Phonebook....................105 Phonebooks Available on FOMA Terminal, Add to Phonebook, Add to FOMA Card Phonebook, Save to Phonebook from Redial and Received Calls, Group Settings, Search Phonebook, Edit Entries, Delete Entries, Set Secret, 2-touch Dialing/2-touch Mail Sound/Screen/Light Settings ..............
Page 9 Services (USSD) Data Communication ................. 453 Data Communication, General Flow to Prepare for Data Communication, Connect the FOMA Terminal to Your PC, Install the Communication Setting File, Communication Settings with/without the FOMA PC Setup Software, FirstPass PC Software, Communication Settings, Send and Receive Data (OBEX), AT Command List Text Input ....................
Page 10: Features Of The Foma Sh902I
Features of the FOMA SH902i FOMA is the name of DoCoMo’s service based on W-CDMA, which is recognized as a global standard for third generation mobile communications system (IMT-2000). The World of i-mode Use the i-mode terminal display to access i-mode, an online service used to access useful information from i-mode menu sites (programs) or i-mode supported sites, or easily send and receive e-mail.
Page 11 Card to shoot and play long movie files. Save movie or music data created on an external device to the miniSD Memory Card and play back on the FOMA terminal. (Depending on the condition, some files may not be played nP.
Page 12: Maximizing Use Of The Foma Sh902I
View PDF files on the FOMA terminal View Word, Excel, PowerPoint, text and image files (JPEG, GIF, downloaded from i-mode sites or PNG, BMP) saved in the miniSD Memory Card on the FOMA saved on miniSD Memory Cards. terminal. Word...
Page 13 nP. 267 Deco-mail Easily make Deco-mail from i-mode mail by changing text size/background color or pasting images. Message entry screen Palette screen Preview screen Sending message screen Send AV Exchange Viewing images on a TV screen nP. 407 Use a flat-plug AV cable (sold separately) to view Videophone, My picture, i-motion, Document Viewer, and i-αppli images on a TV screen for all to enjoy.
Page 14: Safety Precautions (To Be Strictly Followed)
Handling the FOMA Terminal ........
Page 15 Do not use or leave the FOMA terminal, battery pack, adapters (chargers) or FOMA card in locations subject to high temperatures, such as near a fire or heater, in direct sunlight, or inside a car on a hot day.
Page 16 If you are using electronic medical equipment, Do not aim the Ir (Infrared) data port do not put the FOMA in your breast pocket or towards the eyes. in the inside pocket of your jacket.
Page 17 Memory Card slot cover. Do not close the FOMA terminal on your fingers or objects such as the strap. May result in bodily injury or cause a malfunction. Handling the Battery Pack...
Page 18 May result in electric shock. May result in electric shock. Do not touch the FOMA terminal or Do not use if the adapter’s (charger’s) cord adapters (chargers) if you hear thunder. or power cord is damaged.
Page 19 Do not take your FOMA terminal into FOMA terminal at least 22 cm away from operating rooms, ICUs (Intensive Care your implant. Units) or CCUs (Coronary Care units).
Page 20: Handling Precautions
Do not expose to water. FOMA terminal, battery pack and adapters (chargers) are not waterproof. Do not use in humid or steamy areas such as bathrooms and avoid exposing to rain and other forms of moisture. If FOMA terminal is carried close to skin, perspiration may cause internal components to corrode and result in malfunction.
Page 21 To protect the environment, please take any unnecessary FOMA cards to your local DoCoMo Shop or retailer. Keep a separate memo and note information stored in the FOMA card. DoCoMo shall not be liable for any loss of data.
Page 22: Intellectual Property
If the FOMA terminal is used in a manner which seriously creates a public nuisance, the owner may be subject to punishment under legal and/or regulatory guidelines (such as nuisance prevention ordinance).
Page 23 This product uses WAVE from ACCESS Co., Ltd. as a simple window manager functions. Copyright  1997-2005 ACCESS CO., LTD.  This FOMA uses IrFront from ACCESS Co., Ltd. for Ir data exchange functions. Copyright  1996-2005 ACCESS CO., LTD.
Page 24: Standard Parts Packaged With Unit And Main Optional Parts
Standard Parts Packaged with Unit and Main Optional Parts Standard package FOMA SH902i manual (this manual) ※Quick manual can be found on P. 560. FOMA SH902i CD-ROM FOMA SH902i terminal (Includes warranty and rear cover SH07) SDオーディオ簡易操作ガイド (SD-Audio quick operation guide)
Page 25: Before Using The Foma Terminal
Using a FOMA Card ........
Page 26: Component Names And Functions
The internal antenna area Attaching a commercially available strap The FOMA terminal has an internal antenna. Do With the FOMA terminal closed, pass the strap not touch or cover the internal antenna area with through the strap ring and pass the other end your hands.
Page 27 1 Earpiece 9 Dial/Text entry keys Emits the other party’s voice. Press to enter a phone number. (nP. 52) When in stand-by, listen to Record Press to enter text. (nP. 492) message/Voice memo using the earpiece. a b/Line break/Public mode (Drive mode) key * 2 Display (nP.
Page 28 Main camera (nP. 174) key for 1+ seconds, wait 30 seconds or Use to shoot an image of your surroundings open the FOMA terminal to turn the light or send a video of your surroundings shot off. m Speakers during a Videophone call to the other party.
Page 29 (Normal position) Viewer position To rotate the FOMA terminal display from normal position, open the display to where it stops midway (step 2 position) and then rotate it to the right 180°. A sound effect is heard when the FOMA terminal display is rotated. (nP. 128) Open carefully with both hands.
Page 30 How to Use the Multi-guide Key and Guidance Key Multi-guide key Use the Multi-guide key (four-way key and OK key) to select and set menus that are shown. Move the cursor with the four-way key and set the selection using the OK key. ※...
Page 31: Viewing The Display
Viewing the Display The display allows you to check the current status after the power is turned on or while setting up functions. The display lights for a set period of time when a key is pressed. The default setting is 15 seconds.
Page 32 Appears when Manner mode is set. store received mail is also indicated. i USB mode x (nP. 383) s Message R icon and Message F icon Indicates that the FOMA USB cable is ABLMGIST (nP. 243) connected. Indicates the reception status of the Message...
Page 33 My picture of Data box (nP. 355) Note miniSD Memory Card is referred to as miniSD or SD on the FOMA terminal. (nP. 376) Some of the screen shots in this manual have been modified or abbreviated. The display for the FOMA terminal is manufactured using high-precision technology, but it may occasionally contain dots that fail to light or that remain permanently lit.
Page 34 When a stock icon appears in stand-by, press t. Select a stock icon with u and press t. Check notice details. After the details are checked, the stock icon and message disappear. Note Stock icons do not appear when playing i-motion set to stand-by or running i-αppli in stand-by. Switching Between Displays When Calendar is set in stand-by, press H to switch between the stand-by and the calendar.
Page 35: Menu Selections
Menu Selections Functions are set or registered after a menu appears. Menus can be displayed using the following methods. Select a function starting from the Top menu. Retrieve a function by entering a function number. (nP. 34) Select a function from the Shortcut menu. (nP. 429) Select a frequently used function displayed in large font (Zoom menu).
Page 36 In stand-by, press t, select a menu or an icon using w and press t. Select a function using u and press t. (Stand-by) (Top menu) When Data box is selected When My picture When Camera is selected is selected To access the above function from the Top menu, the following instruction appears in this manual: Alternatively, select + (Data box) →...
Page 37 P. 227 Screen memos Screen memo list P. 229 Shoot picture Still picture shooting screen P. 180 My picture folder list of Data box (FOMA terminal View picture P. 354 handset) Camera function Shoot movie Movie shooting screen P. 180...
Page 38: Displaying The Supportbook
Supportbook Displaying the Supportbook Supportbook (preset) is a simple operation guide on the FOMA terminal that uses BookReader. Use this function when unsure of operations. (nP. 401) For example, when composing a message with Multi Assistant, press $ to use Supportbook (preset).
Page 39: Using A Foma Card
Do not accidentally touch or damage the IC portion when inserting or removing a FOMA card. If the FOMA card is inserted into another i-Channel supported terminal, tickers do not appear. The i-Channel tickers are automatically turned ON when the latest information is received or the channel list is shown.
Page 40 Do not misplace the FOMA card once it is taken out. The FOMA terminal power may turn off if the IC area of the FOMA card is dirty. Wipe off any dirt with a dry cloth. ＊ miniSD Memory Cards are sold separately. (nP. 376)
Page 41 The FOMA card has built-in restriction functions as security functions for protecting personal data and files. When the FOMA card is inserted into the FOMA terminal and data or files are retrieved using any of the following methods or when an i-αppli is running, FOMA card restriction functions are automatically set in the retrieved data or files.
Page 42: Inserting And Removing The Battery Pack
WORLD WING is a DoCoMo FOMA international roaming service that makes it possible to use the mobile phone number registered in Japan to make and receive calls while abroad by inserting the FOMA card (green) in a supported FOMA terminal or local mobile phone (W-CDMA or GSM format).
Page 43 Avoid inserting and removing the battery pack in viewer position. Display may be damaged. If the battery pack connection terminal side or FOMA terminal battery pack (charger terminal) is dirty, the FOMA terminal power may turn off. Additionally, the battery may not be sufficiently recharged. Wipe off any dirt with a dry cloth or cotton swab.
Page 44: Charging The Mobile Phone
Cautions when charging Do not charge for long periods of time with the power left on. If the FOMA terminal is left on after charging is complete, the battery pack charge decreases. In such cases, the AC or DC adapter charges the battery again. However, depending on when the FOMA terminal is disconnected from the AC or DC adapter, the battery charge level may be low, the battery alert tone may sound, or the battery may only be usable for a short time.
Page 45 Do not forcefully pull the rubber covers on the AV output and earphone/microphone terminal or the external connector terminal. May damage the cover. Do not place objects near the FOMA terminal when charging. The FOMA terminal may be damaged. Display may be damaged when charged in viewer position.
Page 46 Make sure that the power is turned off before leaving the car. Note that even if the FOMA terminal is turned on, turning off the ignition or pulling the DC adapter out of the cigarette lighter socket will turn the FOMA off. To make a call or stay in stand-by, first disconnect the connector from the FOMA terminal.
Page 47: How To Check The Battery Level
Battery Level How to Check the Battery Level Check the approximate battery level in the display. " : Battery level is still sufficient # : Battery level is low $ : Battery is almost empty % : Battery is empty (power will turn off soon) { : Battery pack is being charged Note When icons have been changed (nP.
Page 48: Turning The Power On And Off
When Enter PIN code appears, enter the PIN code (nP. 156). Note If the FOMA card is not inserted, Insert UIM and a FOMA card error appears. (nP. 30) Turning the Power Off Press H (Power) for 2+ seconds. It may take some time for the power to turn off. (The end screen appears on the display until the power turns off.)
Page 49: Making The Initial Settings
Setting item Details Reference Date settings Sets the date and time on the FOMA terminal. Set to automatically P. 48 correct the date and time. Change security Registers the terminal security code required to use various functions on P.
Page 50: Setting The Date And Time
Setting the Date and Time Real-time clock/ date: ON Set the date and time on the FOMA terminal. Set to automatically correct the date and time. In stand-by, press t34. Alternatively, select _ (Settings) → General settings → Date settings from Top menu.
Page 51: Sending Your Own Phone Number To The Other Party
Notify Caller ID Sending Your Own Phone Number to the Default setting Other Party Do not notify Display your number (caller ID) on the other party’s phone (display) when making a voice/ Videophone call. Handset number (caller ID) is important personal information. Be very careful about your caller ID setting. Set whether or not to send your caller ID using the methods below.
Page 52 LMEMO9...
Page 53: Calling/Receiving
Answering Calls by Pressing Any Key ......<Any Key Answer>64 Closing the FOMA Terminal to End/Hold Calls ....<Set when Folded>64 Using Received Calls .
Page 54 During a call, approximate call duration appears on the screen. When the call duration exceeds 9:59:59, the display resets to 0:00. The FOMA terminal may become warm after continuous use. This is not a malfunction. Do not cover the internal antenna area when making a call.
Page 55 Hold tone does not play on the caller’s side when Manner mode is set. The other party hears the hold tone (nP. 68), and the call is placed on hold. Calls stay on hold even when the FOMA terminal is closed. Set when folded (nP. 64) does not apply. Selecting Multi number Those subscribing to Multi number service can select a saved Multi number and make a call.
Page 56 Switching from Voice Call to Videophone Switch between voice call and Videophone for placed calls. Notify switch-mode (nP. 93) must be set to Indication ON for the other party’s FOMA terminal. Received calls cannot be switched. Have the other party switch.
Page 57 Redial Redialing Previously Called Numbers The FOMA terminal keeps a record of the 30 most recent calls made (including PushTalk). Retrieve these phone numbers to make calls. When 30 calls are exceeded, phone numbers are erased starting with the oldest.
Page 58 Related Operations Delete redials <Delete> In stand-by, press r (I) ? select phone number ? C21 [Delete one]. To delete all redials: Press C22. Select Yes ? t. Note Deleting redials Redials are not deleted when the handset is turned off. Delete redials so other people cannot see them. Redials are reset when the following operations are performed.
Page 59 Pause Dial Sending Touch-tone Signals with Simple Operations Use pagers and services such as ticket reservations and bank balance inquiries, with simple operations by saving the combinations of phone numbers and messages (numbers) in the phonebook. Saving Touch-tone Data to the Phonebook Enter phone number in phonebook (nP.
Page 60 Videophone mode after the dialing method above. Refer to the DoCoMo web page for information on available countries and providers. Depending on the other party’s Videophone terminal, the image that appears on the FOMA terminal may be distorted, or connection may not be possible.
Page 61 Setting International prefix Save up to five prefixes for international calling. The number is added when making calls from phonebook, Received calls or Redial. In stand-by, press t691, select -------------------- to save a new number and press t. Alternatively, select _ (Settings) → Phone settings → Other settings → Int’l prefix →...
Page 62 Note When Reset settings (nP. 437) is performed, the only available prefix is 009130-010. Adding an International Access Code <International Call> In stand-by, enter the country code, area code, other party’s phone number and press C32 [International Call]. International call screen appears. Select prefix and press t.
Page 63 Functions such as display settings, ring tones and Public mode (Drive mode) call functions follow FOMA terminal settings for incoming calls. If hands-free device has sound enabled, device plays ring tone even when FOMA terminal is set to Manner mode or Silent.
Page 64 Note When FOMA terminal sound is enabled, Set when folded is followed if handset is closed during a call. If device sound is enabled, call continues when FOMA terminal is closed regardless of Set when folded. Record message settings are followed even when handset is connected to the device.
Page 65 Note Calls to the FOMA terminal cannot be made from phones with no direct outside line, such as an internal building phone. Set mute seconds (nP. 171) to delay ring tone sounding until set number of seconds pass when received from an unregistered number or a number without caller ID. Set Reject unknown (nP. 171) to prevent callers not registered in Phonebook from being connected.
Page 66 Hold sound, Silent, or Finish call settings. For Videophone calls, the set substitute image (nP. 89) is sent to the other party. Open the FOMA terminal to send camera image to the other party. (nP. 88) If the earphone/microphone is disconnected while the FOMA terminal is closed, the call is mute when set to Silent and Finish call, and put on hold when set to Hold sound.
Page 67 Received Calls Using Received Calls The FOMA terminal keeps a record (Received calls) of the 30 most recent calls (including PushTalk) received. Retrieve these phone numbers to make calls. When 30 calls are exceeded, phone numbers are erased starting with the oldest.
Page 68 Note Press i in received calls list to show received messages list. Refer to P. 297 for details on screen layout and using the Received messages history. Operations from the Submenu When C is pressed from the received calls list or details screen, a Submenu appears with the following operations. Received calls Submenu Items from Items from received...
Page 69 Press o (louder) or p (softer) to adjust and press t. After adjusting the volume, press t or c, or wait approximately two seconds and the previous screen reappears. Note Volume remains at adjusted level even when handset is turned off or battery pack is removed. On Hold Placing Calls On Hold Place calls on hold which cannot be answered immediately.
Page 70 Note When a recorded voice memo is set as On hold tone, setting returns to default if the voice memo is deleted. Set Hold Tone Default setting Setting Hold Tone Hold melody 1 Set the hold tone to Hold melody 1, Hold melody 2 or recorded voice memo for when the other party is on hold.
Page 71 FOMA terminal will not vibrate when i-mode mail, SMS, or Message R/F is received even if Vibration mode is set. Although ring tone does not sound, message is received automatically, and received mail icon appears.
Page 72 Public Mode (Power OFF) Using Public Mode (Power OFF) Public mode (power OFF) is an automatic answering service used to ensure manner in public places. Set Public mode (power OFF) to play a message for the caller indicating that the power is off and you are unable to speak (in a hospital, airplane, train near the priority seats), and the call ends.
Page 73 Checking Missed Calls With the LED <Call Notice> Set the LED to flash for missed calls and new mail received while the FOMA terminal is closed or the display is off (in Power saver mode). In stand-by, press t26 and 1 [ON].
Page 74 Videophone call is received, a reply image is sent and the caller’s message and image are recorded. Record message is not available when FOMA terminal is turned off or outside the service area. This function is convenient when used in conjunction with Network Voice Mail Service.
Page 75 Record messages (voice/Videophone calls) may not be saved if three seconds or less. Saved content may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any loss of content. It is recommended that a memo be kept of contents for Record message (voice/Videophone calls).
Page 76 Note During recording, calls from a third party cannot be answered. Third party hears a busy signal. If Record message is not set, set during incoming call to record message. (nP. 75, P. 85) Messages that indicate outside the service area, changed phone number, Voice mail starting, etc. cannot be recorded.
Page 77 (nP. 76) Note Saved content may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any loss of content. It is recommended that a memo be kept of Record message contents.
Page 78 Checking Recorded messages with vibrator When in stand-by, press x (shutter) with the FOMA terminal closed to use the vibrator as an alert for missed calls, Record message, new ToruCa, new mail and voice mail messages. If there are any, Pattern 1 will activate twice.
Page 79: Making/Receiving Videophone Calls
Making/Receiving Videophone Calls Using Videophone ............78 Making Videophone Calls.
Page 80: Using Videophone
Using Videophone Make calls while viewing each other’s image. Videophone transmits at 64 kbps or 32 kbps. Connection charges for digital transmissions are the same whether transmission speed is 64K or 32K. Digital transmission fees are incurred even when a substitute image or Chara-den is sent/received in place of a video of oneself.
Page 81: Making Videophone Calls
Chara-den During a Videophone call, display a character in place of one’s own image. Characters move their mouths in accordance with sounds and are maneuvered with key operations. (nP. 86) © BVIG Making Videophone Calls Check that there are sufficient battery and signal levels. Send a substitute image or Chara-den to the other party instead of one’s own image.
Page 82 To disconnect, press x (shutter). Note Videophone calls cannot be made to emergency numbers (110, 119, and 118) from the FOMA terminal. Videophone call is not connected when placed to an unsupported handset. If Redial voicecall is set to ON, the number is automatically redialed as a voice call (nP.
Page 83 Note If subscribed to Call Waiting, the number is recorded in Received calls and xx missed call(s) appears in stand-by when a voice/Videophone call is received during a Videophone call. During a Videophone call, received i-mode mail and Message R/F are held at the i-mode center. After a Videophone call, i-mode mail or Message R/F held at the i-mode center can be retrieved by checking for new messages.
Page 84 Switching from Videophone to Voice Call Switch between Videophone and voice call for placed calls. Notify switch-mode (nP. 93) must be set to Start for the other party’s FOMA terminal. Received calls cannot be switched. Have the other party switch.
Page 85: Receiving Videophone Calls
Receiving Videophone Calls When answering Videophone calls, both party’s images appear on the display. Send a substitute image or Chara-den to the other party instead of one’s own image and answer the phone. When receiving a Videophone call, use the flat-plug earphone/microphone with switch (sold separately) (nP.
Page 86 2+ seconds will answer the call with your image when in normal and viewer position, and the set substitute image when the FOMA terminal is closed. Switch between substitute image and camera image during a call. (nP. 88) When Set auto answer (nP.
Page 87 It is recommended that a memo be kept of Record message contents. Reply images for Record memo can be set in Videophone reply image. During Record memo, the reply image set on the FOMA terminal is sent to the other party with Record message superimposed. Related Operations Set the still picture for Record memo <V.phone reply image>...
Page 88: Chara-Den
Other party (caller) selects to switch between voice call and Videophone call. Call recipient cannot switch. (Available with models that support switching between voice call and Videophone.) Notify switch-mode (nP. 93) must be set to Start on the recipient’s FOMA terminal. Caller switches to voice call during a Videophone call.
Page 89 Japanese OL This character is a Japanese office lady. She can perform a variety of actions such as expressing happiness and distress, waving her hands and tilting her head. Full-action mode action list Part-action mode action list Number Number Action Action (key operation) (key operation)
Page 90: Setting The Image To Send To The Other Party
Note Depending on the Chara-den, some actions are performed automatically. Setting the Image to Send to the Other Party Changing the Image to Send During Call <Change Send Image> Send a preset substitute image instead of a camera image. During a Videophone call, press i [Subst img]. Alternatively, press C32 [Substitute image], select folder, press t, select substitute image and press i [OK].
Page 91 Use JPEG or GIF images saved in My picture of Data box that are set to QCIF: 176×144 (W×H). (Animated GIFs are not available.) Still pictures that are restricted for output from the FOMA terminal are not available. Images shot with the FOMA terminal are available regardless of File restriction. (Images shot with picture memo are not available.) Still pictures saved on a miniSD Memory Card are not available directly.
Page 92: Setting Hands-Free Videophone
Use JPEG or GIF images saved in My picture of Data box that are set to QCIF: 176×144 (W×H). (Animated GIFs are not available.) Still pictures that are restricted for output from the FOMA terminal are not available. Default setting Setting Outgoing Image Quality <Visual Preference>...
Page 93: Setting The Image For Videophone Calls
Note Speak from 20 to 40 cm away from the mouthpiece. When the surroundings are noisy, sound may break up and the call may not be satisfactory. When using hands-free outdoors or in a location where surroundings are noisy, use the flat-plug earphone/ microphone with switch (sold separately) (nP.
Page 94: Changing Videophone Settings
Related Operations Set display method <Display setting> During a Videophone call, press C51 [Display setting]. In stand-by: Press t643. Select display method ? t. Set the location of the subscreen <Subscreen display> During a Videophone call, press C52 [Subscreen disp]. In stand-by: Press t644.
Page 95: Setting To Switch Between Voice Call And Videophone
Default setting Videophone Indication ON This setting lets the other party know whether the FOMA terminal can be switched between Videophone and voice call. When Notify switch-mode is set to Indication OFF, the other party cannot switch the call. Notify switch-mode cannot be changed during voice calls or Videophone calls.
Page 96: Saving Other Party's Image As A Still Picture
While recording, the image is sent to the other party with Recording superimposed. Shutter does not sound. The still picture is recorded and Saving appears. The picture is saved to the Camera folder in My picture of Data box. The picture can only be sent to a FOMA terminal.
Page 97: Pushtalk
PushTalk PushTalk ............. . . 96 Sending PushTalk Transmissions .
Page 98: Pushtalk
PushTalk Press the PushTalk key to recall PushTalk phonebook entries, select the other party’s number and press the PushTalk key again to easily talk to multiple people at once (up to five including yourself). Transmission fees are incurred each time the key is pressed and transmission is sent.
Page 99: Sending Pushtalk Transmissions
Myself: When you are the speaker (has the right to speak) No display: Nobody is speaking Name appears if saved in the FOMA terminal handset phonebook. If the call is transmitted from a network phonebook, the name saved in the network phonebook appears.
Page 100: Receiving Pushtalk Transmissions
Approximate number of times the right to speak was obtained appears when PushTalk transmission is ended. 999 is the maximum value that appears. When exceeded, *** appears. Related Operations Send PushTalk transmissions from the FOMA terminal handset phonebook In stand-by, press a ? select name ? \. Send PushTalk transmissions from Received calls In stand-by, press q ? select the received calls history ? \.
Page 101: Adding To Pushtalk Phonebook
Entries saved to the PushTalk phonebook are also saved to the FOMA terminal (handset) phonebook. Save entry to the FOMA terminal (handset) and save the name, reading and one phone number to the PushTalk phonebook. Also save entries already saved in the FOMA terminal (handset) phonebook to the PushTalk phonebook.
Page 102 C3 [Edit data]. (nP. 101) Select item, press t and edit. Other phone numbers saved to the FOMA terminal handset phonebook entry are available. To change groups, select the group to change to, press t, check the save list, press t and i [Complete].
Page 103: Using Pushtalk Phonebook To Send Pushtalk Transmissions
Myself: When you are the speaker (has the right to speak) No display: Nobody is speaking Name appears if saved in the FOMA terminal handset phonebook. If the call is transmitted from a network phonebook, the name saved in the network phonebook appears.
Page 104 When calls are not answered within the set duration, Disconnected appears on the other member’s transmission screens. Set when folded Select to end calls or activate speaker phone when the FOMA terminal is closed. (nP. 64) Network connection A PushTalk Plus (nP. 96) subscription is required to use the network connection.
Page 105: Deleting Pushtalk Phonebook Entries
Press 4 → enter terminal security code (four to eight digits) → To delete all PushTalk phonebook entries A screen to select whether to delete from the FOMA terminal handset phonebook appears. Select a deletion method for the FOMA terminal handset phonebook, select Yes and press t.
Page 106: Setting Pushtalk Send/Receive Options
Set Finish call or Speaker phone (Other party’s voice is heard through the P. 64 speakers) to engage when the FOMA terminal is closed during a call. Set mute ring time Set the number of seconds to delay the start of ring tone for calls from unknown callers P.
Page 107: Phonebook
Phonebooks Available on FOMA Terminal ........
Page 108 Save items such as names, phone numbers and mail addresses for FOMA terminal handset and FOMA card phonebooks. Save to PushTalk phonebook when saving to the FOMA terminal handset phonebook. Use FOMA card on other FOMA terminals. To use phonebook on other FOMA terminals, save numbers in FOMA card phonebook. FOMA terminal handset phonebook...
Page 109 Add still pictures, movies/i-motion, etc. shot with camera to phonebook entries. When a call is received from someone with an image in their phonebook entry, their name, phone number and image appear. Save to PushTalk phonebook when saving to the FOMA terminal handset phonebook. Entry items...
Page 110 Note information saved in phonebook separately or transfer/store them on a PC using miniSD Memory Cards (nP. 376) or Data Link Software (nP. 522). Saved content may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any loss of content.
Page 111 When Set secret (nP. 124) is set to ON, phonebook entries cannot be overwritten. Set Secret mode (nP. 166) to ON. To save a phone number or mail address when 750 entries are already saved on the FOMA terminal handset, select a memory number to overwrite an already existing phonebook entry. (Entries in the FOMA card phonebook are not overwritten.)
Page 112 Note Ir exchange Send and receive phonebook saved in FOMA terminal handset using Ir exchange. (nP. 390) Symbols and pictographs Enter symbols and pictographs for Name, Memo and Postal address in FOMA terminal handset phonebook. Symbols and pictographs may not appear properly when sent by Ir exchange to PCs and mobile phones not supporting i-mode.
Page 113 Movies/i-motion with Ring tone set to unavailable cannot be set as Chaku-motion. (nP. 386) Movies/i-motion copied from miniSD Memory Card to FOMA terminal handset cannot be set as Chaku-motion. Record movies on the FOMA terminal handset to use for Chaku-motion.
Page 114 Call Waiting. Movies/i-motion copied from miniSD Memory Card to FOMA terminal handset or transferred using Ir exchange or Data Link Software are not available. Record movies on the FOMA terminal handset to use for Picture call. To delete image set for Picture call from Data box, select Delete one. Select Yes in the confirmation screen to delete.
Page 115 9 for phone number type icon and U for mail address type icon are automatically set. Add to FOMA Card Phonebook Saving to FOMA Card Phonebook Save entries to FOMA card phonebook. Entry items differ slightly from FOMA terminal handset phonebook. Save up to 50 entries to the FOMA card phonebook.
Page 116 Select S, press t, enter phone number and press t. Enter up to 26 digits for FOMA card (green) and 20 digits for FOMA card (blue). When phone number is entered incorrectly, press c to delete the last digit or character at the cursor.
Page 117 Entry items are saved as follows when copied to FOMA terminal handset. Reading is saved as single-byte katakana. Phone number and mail address from FOMA card are saved as first phone number and mail address in FOMA terminal handset. Entries are allocated accordingly if same group name exists in FOMA terminal handset and FOMA card phonebooks.
Page 118 Edit group name. U (Not specified) cannot be renamed. The default setting is (Not specified), グループ１ (Group 1) to グループ１９ (Group 19) for FOMA terminal handset phonebook and (Not specified), グループ１ (Group 1) to グループ１０ (Group 10) for FOMA card phonebook.
Page 119 Movies/i-motion with Ring tone set to unavailable cannot be set as Chaku-motion. (nP. 386) Movies/i-motion copied from miniSD Memory Card to FOMA terminal handset cannot be set as Chaku- motion. Record movies on the FOMA terminal handset to use for Chaku-motion.
Page 120 <Search By> Search phonebook by reading, group, or memory number. Memory numbers do not exist on FOMA card phonebook. Searching by memory number is not available. In stand-by, press a to show by the last method used. In stand-by, press a and C1 [Search by] to select search method.
Page 121 Searching by Name <Reading?> In stand-by, press a. Alternatively, select - (Phonebook) from Top menu. If search by reading phonebook list does not appear, press C11 [Reading?]. Phonebook list (Other column) Select name. Press v. To show previous/next column in phonetic order Press u.
Page 122 Use 2-touch dialing to call people saved in memory numbers 000 to 099. (nP. 124) In stand-by, press a. Alternatively, select - (Phonebook) from Top menu. If search by memory number phonebook list does not appear, press C13 [Memory no.?]. FOMA terminal handset phonebook list (Memory numbers 010 to 019) Select memory number.
Page 123 Transmission speed is reset after Videophone ends. It is recommended that 64K transmission speed be used when making Videophone calls to compatible FOMA terminals. Use 32K transmission for connecting to devices such as PHS phones that cannot use 64K due to network conditions.
Page 124 (nP. 109) Select Yes → t. FOMA card phonebook When editing and overwriting a phonebook entry that has a phone number also saved in a PushTalk phonebook, a message stating PushTalk phonebook entry will also be changed appears. Select Yes and press t to overwrite.
Page 125 Deleting is not available for phonebook entries set to accept/reject calls, and phonebook entries set with Remote lock all License number. (All in group and Delete all are available.) When a Phonebook entry is deleted from the FOMA terminal handset phonebook, the entry is also deleted from PushTalk phonebook.
Page 126 2-touch Dialing/2-touch Mail Calling and Sending Mail with a Few Key Strokes Easily call or send i-mode mail to parties saved in memory numbers 000 to 099 in FOMA terminal handset phonebook. First phone number/mail address is called/addressed when multiple are saved.
Page 127: Sound/Screen/Light Settings
Sound/Screen/ Light Settings Sound Settings Changing Mobile Phone Sounds ......<Sound Settings>126 Changing Mobile Phone Sound Volume .
Page 128 Also change i-mode mail, SMS, Chat mail and Message R/F ring tone. Set i-motion downloaded from i-mode or audio/video data recorded with FOMA terminal. Default setting Changing Ring Tone and Chaku-motion <Select Ring Tone>...
Page 129 Forward and store saved i-melody data to a PC using miniSD Memory Card (nP. 376). (Melodies with file restrictions cannot be transferred.) Saved content may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any loss of content.
Page 130 Adjust Volume Changing Mobile Phone Sound Volume Change voice/Videophone, i-mode mail, SMS and Message R/F ring tone volume. Volume can also be changed for Keypad sound, FOMA terminal Open/Close/Rotation sound, Timer sound and Charge start/end sound. Default setting Adjusting Ring Tone Volume <Phone Ring Volume>...
Page 131 In stand-by, press t111 and select an item. Alternatively, select _ (Settings) → Sound → Select volume → phone ring vol from Top menu. Press 1. To adjust ring volume for voice call Press 2. To adjust ring volume for Videophone Press 3.
Page 132 Default setting Adjusting Keypad Sound Volume <Keypad Sound> Volume 5 Adjust the volume of the sounds emitted when keys are pressed (Keypad sound). Also adjust the volume for Open/Close sound, Rotation sound, Timer sound and Charge start/end sound. Set to Silent to silence the battery level sound, Keypad sound, Open/Close sound, Rotation sound, Timer sound and Charge start/end sound.
Page 133 Enjoy lively i-αppli games and ring tones with 3D sound (for content supporting 3D sound). For the best results, hold the FOMA terminal about 40 cm in front. Note that 3D sound is less effective if held slightly off to the side, too close or too far out front.
Page 134 Note Note that if Vibrator is set and FOMA terminal is left on a table, it may fall when a call is received. Vibrator settings are not reflected in Flash movies (nP. 239). Even if Vibrator is set to OFF, vibrator operates in Pattern 1 while in Manner mode (when vibrator is set to ON in Normal manner mode or Original manner mode).
Page 135 Sounding Ring Tone in Earphone Only Earp.+speaker Set ring tone to sound from earphone instead of the FOMA terminal speakers when the flat- plug earphone/microphone with switch (sold separately) is connected. If no flat-plug earphone/microphone with switch is connected, the ring tone will sound from the speakers even when set to Earphone only.
Page 136 Setting Manner Mode Press # for 1+ seconds when in stand-by. To set Manner mode while receiving a call, press # for 1+ seconds. The Manner mode selected previously is set. If set while receiving, ring tone is silenced and Manner mode is set. This setting remains set until disabled.
Page 137 Flash movies, i-motion, images received via i-mode mail, etc., as stand-by. Stand-by display images are preset in the FOMA terminal. (nP. 512) Use Data box images such as JPEG/GIF images, animated GIF, Flash movies in My picture and movies/ i-motion in i-motion folder.
Page 138 Even if Flash movies with audio are set as stand-by, they are played without sound. Still pictures and movies/i-motion saved on miniSD Memory Card cannot be directly set as stand-by. Copy to FOMA terminal handset before setting. Downloaded Flash movies may play differently from when on a site.
Page 139 In stand-by, press t213 and select display method. Alternatively, select _ (Settings) → Display → Stand-by display → Calendar display from Top menu. Press 1. To display one month An icon appears on days with schedules set. (large) Days with schedules set are underlined. Press 2 →...
Page 140 Select Set disp position, press t and select the display position. Press 1. Press 2. Down Press i [Complete]. Note Change the image for clock (Small) in Display mark (nP. 144). Some images may not appear properly when language is switched between Japanese and English. Default setting Showing i-Channel Ticker <i-Channel Ticker>...
Page 141 Images that cannot be set do not appear. Incoming video phone is prioritized for Videophone calls with no caller ID. Images on miniSD Memory Cards cannot be set for Call/Receive display. Copy to FOMA terminal before setting. Picture call settings (nP. 140) are prioritized if set to ON.
Page 142 15 seconds. Note If an image set for Send/Receive display is deleted, the default setting image reappears. Still pictures on miniSD Memory Card cannot be set for the Send/Receive display. Copy to FOMA terminal before setting. Picture Call Set...
Page 143 In stand-by, press t27 and select Power saver type. Alternatively, select _ (Settings) → Display → Power saver set from Top menu. Press 1. To set Normal mode (auto bright) Press 2. To set Normal mode (fixed bright) Press 3. To set Power saver mode Press 4.
Page 144 Setting Image Display Time <Screen Display Time> Display time: 2 minutes Turn off the display when FOMA terminal is not in use for a set period of time to conserve battery power. In stand-by, press t2742 and select time before activating Power saver mode.
Page 145 Default setting Setting Screen Saver <Screen Saver> When Screen display time passes, the screen turns dark and only the date and time appear. When a call or mail is received, xx missed call(s) or xx mail message(s) can be displayed even when Screen Saver is set.
Page 146 Personalize Arranging the Display Default setting Changing Submenu Design <Submenu Image> See below Change menu background pattern (image around edge of display). Use JPEG/GIF images or animated GIFs with a size of 218(W) × 10(H). (Flash movies are not available.) The default setting is メニュー枠1（上）...
Page 147 Default setting Changing the Color Scheme <Theme Color> SilverSky Set the color scheme of the screen. In stand-by, press t23 and select theme color. Alternatively, press _ (Settings) → Display → Theme color from Top menu. Press 1. Press 5. SilverSky Girlish Press 2.
Page 148 Setting Top Menu Icons <Icon Image> Change Top menu icons. Use 76(W) × 76(H) pixel JPEG images, GIF images or animated GIFs. Downloaded images can also be used. Set two images per icon, for selected and unselected status. Up to three scenes are used for animated GIFs. Image for selected status is not available. In Top menu (nP.
Page 149 Default setting Setting Action Focus for Top Menu Icons <Action Focus> Globe Set Action focus for Top menu icons. When set, Action focus only applies to icons selected in Top menu. Action focus is applied to last image for animated GIFs. In Top menu (nP.
Page 150 Called LED Setting the Illumination Color Default setting Setting the Called LED Color <Called LED Color> See below Set the LED (main camera picture light/called LED) color for incoming voice/Videophone/PushTalk calls and mail. If a melody with LED actions is set as the ring tone, link the melody and LED actions (Melody ON).
Page 151 Related Operations Note Melody ON LED does not activate for melodies without called LED settings. Font Style Default setting Changing Font Width Bold Change the font width for the display. Choose from three styles. In stand-by, press t22 and select font width. Alternatively, select _ (Settings) →...
Page 152 Note Set viewing angle to ON or OFF even while in Manner mode. Default setting Changing Viewing Angle <Pattern Setting> Geometric (deep) In stand-by, press t282 and select pattern. Alternatively, select _ (Settings) → Display → Set viewing angle → Pattern setting from Top menu. Black filter A screen that looks as if covered by a black filter appears.
Page 153: Security Settings
FOMA Terminal Security Code ........
Page 154 FOMA Terminal Security Code For convenient use of FOMA terminal functions, some functions require security codes. In addition to the terminal security code used for various handset operations, use security codes such as the network security code and i-mode password when using network services.
Page 155 0000 by default but can be changed by the user. PIN code is a four- to eight-digit number (code) that is entered when the FOMA terminal is turned on or when a FOMA card is inserted to prevent unauthorized use by a third party. Enter PIN code to enable making/receiving calls and operating the handset.
Page 156 Enter new terminal security code (four to eight digits) again and press t. Terminal security code is changed. Face Authentication Default setting Using Face Authentication Set Face authentication. Security level can also be set. For the following, the terminal security code entry screen appears and Face authentication is not available. When terminal security code is changed ( P.
Page 157 Register face authentication image. When i [Complete] is pressed when no images are registered, Register face authentication image appears. Enter face authentication image registration number 1 to 7 → To register new face face sub camera towards yourself → t [Add]. authentication image Register again if Unable to recognize.
Page 158 Enter when performing Client certificate operations (issuance of Client certificate to use FirstPass) or accessing FirstPass compatible sites (nP. 248). Use previously set PIN and PIN2 codes when inserting an old FOMA card into a newly purchased FOMA terminal. PIN and PIN2 codes are 0000 if unchanged.
Page 159 In entry screens that require PIN/PIN2 code, PIN/PIN2 code is locked if incorrectly entered three times. In such cases, disable PIN/PIN2 lock and set new PIN/PIN2 codes. Check the “FOMA service registration agreement (customer copy)” for information on PUK (PIN lock disable code).
Page 160 ※ FOMA terminal owners will be asked to bring the FOMA terminal, FOMA card and identification (a driver’s license, etc.) to a DoCoMo Shop or retailer in the case of a forgotten PUK or completely locked FOMA card. Secure by requiring security code...
Page 161 The following items can be set. Lock function Operation/Restrictions Reference All lock Prevents unauthorized use of the FOMA terminal for all operations other than See below power ON/OFF. Remote lock all Remotely set All lock. IC card lock is also automatically set.
Page 162 SMS and Message R/F icons appear. Failure to disable All lock five times consecutively will turn the FOMA terminal off. Turn the handset on again and enter correct terminal security code (four to eight digits).
Page 163 Number of received calls. Operate from payphones if set. Same operations are available when All lock is already set. Call FOMA terminal from payphones or other phones saved as Remote lock all License number. Disconnect after a few rings.
Page 164 Note When Remote all lock is set, IC card lock is automatically set. However, even if Remote all lock is disabled, IC card lock is not disabled. Refer to P. 164 for details on disabling IC card lock. Numbers saved for Reject calls, Accept calls, Reject unknown can be set for License number. Calls from a License number are not counted in the following circumstances.
Page 165 PIM Lock Default setting Hiding Phonebook and Schedule Entries Restrict access to mail and phonebook to prevent access to personal information or unauthorized editing. Items that can be locked i-mode/i-Channel, i-αppli, Multimedia, Mail, Phonebook, Record message/Voice memo, Memo/Schedule/ ToDo, ToruCa Items can be locked separately.
Page 166 Sending SMS or i-mode mail through direct address Transferring/Copying phonebook data between input (address input from the phonebook is possible) FOMA terminal and FOMA card Saving/Editing/Deleting phonebook entries Phone To (AV Phone To) Calling from alarms (available if saved in the...
Page 167 Some Mobile Wallet compatible i-αppli may not be downloaded or upgraded while IC card is locked. Side Key Guard Preventing Side Key Errors Lock side key when the FOMA terminal is closed or in viewer position to prevent errors. Press [ for 1+ seconds. Side key guard is set and X appears.
Page 168 Only normal data is shown when Secret mode is disabled. Set to automatically disable Secret mode if Power saver mode activates when in stand-by and display turns off, Screen Saver activates or FOMA terminal is closed when in stand-by. Secret mode is disabled when power is turned off.
Page 169 While phonebook PIM is locked, Accept calls is disabled and all calls are connected. SMS and i-mode mail are received normally. FOMA card phonebook numbers cannot be set. Only numbers in the FOMA terminal handset phonebook are available. Remote lock all is also available for phone numbers not included in Accept calls setting. Beeps sound after the set number of received calls is reached and Remote lock all is set.
Page 170 Select list number, press t, select name and press t. Phone number and name in phonebook are saved. (nP. 118) Repeat step 4 to save other phone numbers. Next, set Accept calls to accept calls from callers specified in the phonebook. Save list Note If entry saved in Accept calls is edited/deleted in phonebook, the saved list content is also edited/deleted.
Page 171 While phonebook PIM is locked, Reject calls is disabled and all calls are connected. SMS and i-mode mail are received normally. FOMA card phonebook numbers cannot be set. Only numbers in the FOMA terminal handset phonebook are available. Remote lock all can also be performed from phone numbers saved in Reject calls. Beeps sound after the set number of received calls is reached and Remote lock all is set.
Page 172 Default setting Rejecting Calls from Specified Numbers In stand-by, press t73, enter terminal security code (four to eight digits) and press t. Accept/Reject calls setting screen appears. Press 2 [Reject calls] and select ON or OFF. Press 1 [ON]. To set If phone number is not saved in the list, the save list appears.
Page 173 Set Mute Ring Time Silencing Ring Tone for Callers Not in Default setting Phonebook Set ring tone to sound after a set number of seconds when the caller is not registered in the phonebook (including those without caller ID). This is one way to avoid nuisance calls. When setting mute ring time, set to record calls disconnected during mute ring time duration in Received calls.
Page 174 When Disable Set mute ring time appears, mute ring time is set. Set to OFF and try again. (nP. 171) Note Reject unknown is prioritized when set with Public mode (Drive mode). Other Security Settings Use the following settings and functions to secure your FOMA terminal. Intent Function/Service name Reference To select mail to receive...
Page 175: Camera
Camera Before Using the Camera..........174 Shooting Still Pictures .
Page 176 Before Using the Camera Camera Operations The FOMA terminal has two cameras, a main camera (external) and a sub camera (internal). Use these cameras to shoot still pictures and movies. Use the main camera to shoot pictures of people and the landscape, and use the sub camera to shoot pictures of yourself. When making a Videophone call, use the sub camera to send images of yourself to the other party, and switch to the main camera to send images of other people and the landscape.
Page 177 Images may appear dark and distorted when shot with insufficient battery power. Do not shoot images while the handset is charging. Do not apply force to the lens when closing the FOMA terminal as this may damage the lens. May cause a malfunction.
Page 178 3M: 1536×2048 Note Use a miniSD Memory Card (nP. 376) to transfer and save still pictures from the FOMA terminal handset to a PC. Still picture file names The file names of saved still pictures are labeled automatically according to the date and time the still pictures were shot.
Page 179 45 seconds 31 seconds Unrestricted ※ When File size limit is set to Unrestricted and movie is saved to the FOMA terminal handset, file size is limited to 800 KB. Note Refer to P. 191 for details on the method of setting the image size of movies.
Page 180 Icons that appear in the lower part of the display Still picture mode Movie mode Character reader mode Bar code reader mode 7 5 k 7 5 l 5 AF mode/Focus lock indicator b Still picture Effect indicator (nP. 193, P. 198) (nP.
Page 181 g Movie size indicator (nP. 191) j Switch image/voice indicator (nP. 194) Indicates the image size setting. Indicates the Movie mode setting. : sQCIF: 128×96 Image only : Voice only : QCIF: 176×144 : Image + voice : hQVGA: 240×176 k Inverse mode indicators (nP.
Page 182 Activating/Deactivating the Camera Activate the camera from normal position or viewer position. In normal position In stand-by, press C. Picture light flashes once and the still picture shooting screen appears. The image from the camera is shown on the display. Press H or c to end.
Page 183 Shot still pictures are saved to Camera folder in My picture of Data box or the miniSD Memory Card (nP. 200). (Saving still pictures may take time.) If available space on the FOMA terminal handset is insufficient, delete unnecessary files and increase memory space to save. (nP. 386)
Page 184 Shooting a still picture of yourself Use the main or sub camera to take a picture of yourself. Open the FOMA terminal and rotate the display to take a picture of yourself using the main camera. (nP. 174) ＊ miniSD Memory Cards are sold separately. (nP. 376)
Page 185 Refer to step 3 of “Shooting in Normal Position” on P. 182 for details on saving. Note When the FOMA terminal is closed while showing the viewfinder display, Camera mode ends. When the battery level is low, the picture light does not illuminate brightly.
Page 186 Moving the camera while shooting still pictures in Overlap continuous mode creates an uneven image. Hold the FOMA terminal steady with both hands when shooting the still pictures. After Overlap shooting is complete, the composite of the five images appears as the first image and the original images appear as the second to sixth images.
Page 187 Manual overlap, 4 still or Manual 4 stills cannot be saved. The viewfinder reappears.) To start over Slowly rotate the FOMA terminal. (Slowly open and close when in viewer position.) The viewfinder reappears. Press c in Manual continuous mode, Manual overlap continuous mode or Manual 4 stills to cancel the last still picture shot.
Page 188 Recorded movies are saved to Camera folder in i-motion of Data box or the miniSD Memory Card. Shoot when battery level is sufficient. Check battery level before starting. QCIF: 176×144 and sQCIF: 128×96 movies (Mobile MP4) shot with the FOMA terminal can be sent with mail. (nP. 177, P. 192) To use shot movies for Chaku-motion (nP.
Page 189 The picture light automatically turns on when shooting starts. The picture light automatically turns off when shooting finishes. (Light does not turn off while shooting.) To shoot your own image, open the FOMA terminal and rotate the display, face the main camera towards yourself and press x (shutter).
Page 190 Recording continues even when FOMA terminal is opened while recording in viewer position. However, if shooting time is less than one second, shooting ends and the viewfinder reappears. When FOMA terminal is closed during recording, shooting automatically ends and the movie shooting confirmation menu screen appears.
Page 191 Default setting Adjusting Brightness <Brightness> Brightness 0 Select from five brightness levels. In the still picture shooting screen (nP. 180), press C45 [Brightness]. When in the movie shooting screen (nP. 180), press C35 [Brightness]. Alternatively, press o (brighter) or p (darker) in the still picture shooting screen or movie shooting screen in Normal position.
Page 192 When performing close-up shots of printed materials that are mostly white under fluorescent light, the color or shadow of the FOMA terminal may appear in the picture, depending on the angle and whether the picture light is ON or OFF. This is not a malfunction.
Page 193 When size is set to Icon: 76×76, image quality is set to NORMAL. When shooting movies, hQVGA: 240×176 and QVGA: 320×240 are not available if the save destination is set to FOMA terminal handset. Image size cannot be changed if SPECIAL MODE is set to ON.
Page 194 When sending with i-motion mail, select For mail (short) or For mail (long). Record based on allowable size of mail attachment. When File size limit is set to Unrestricted and the save destination is set to FOMA terminal handset, file size is limited to 800 KB.
Page 195 Auto timer, when activated, is interrupted if display is rotated or c is pressed. However, settings are retained. If the FOMA terminal is opened and closed or H is pressed while using Auto timer, shooting is interrupted and Camera mode is ended.
Page 196 In the still picture shooting screen (nP. 180), press C42 [AF mode] and select AF mode. When in the movie shooting screen (nP. 180), press C32 [AF mode]. Press 1. Standard Press 2 → select the focus area with w. Spot AF Switches to full-screen display.
Page 197 <Shoot with Frame> Set and shoot still pictures with frames. Stand-by display images are preset in the FOMA terminal. (nP. 512) Frames are also available in Continuous mode. (A frame is added to each still picture.) (nP. 183) Frames can be set for sQCIF: 128×96, QCIF: 176×144, Stand-by: 240×320, CIF: 352×288 and VGA: 480×640 sizes.
Page 198 Press t or x (shutter). Note Changing the image size (nP. 191), or switching to Continuous mode (nP. 185) or SPECIAL MODE (nP. 192) cancels Effect shot. Effect shot is not available when SPECIAL MODE is set to ON. Adding various effects to movies In the movie shooting screen (nP.
Page 199 Default setting Shooting Environment/Subject-specific Images Auto <Shoot by Scene> Set camera to shoot with natural colors and focus based on surroundings and subject. Shoot by scene is not available when using the sub camera. In the still picture shooting screen (nP. 180), press C47 [Shoot by scene] and select a scene.
Page 200 Focus lock sound notifies that focus is locked (excluding when recording movies). Focus lock is canceled when the FOMA terminal is opened/closed or display is rotated. When s was pressed Press s (cancel Focus lock) → s (Focus lock).
Page 201 Shoot. When s was pressed Press t. To shoot When x (shutter) was Press x (shutter) fully. pressed halfway Do not change the distance to the subject. Note Focus lock cannot be set when Voice recorder (nP. 393) is activated, when Switch image/voice (nP.
Page 202 Memory Card icon color changes depending on settings. ^ (gray)..Save destination is FOMA terminal handset ^ (pink) ..Save destination is miniSD Memory Card Length of movies that can be saved depends on the size of the miniSD Memory Card. Maximum length is approximately one hour for movies with video.
Page 203 Note In Still picture mode, images are saved to FOMA terminal handset even when save destination is set to the miniSD Memory Card if there is no available space. In Movie mode, when shooting is started with the save destination set to the miniSD Memory Card and there is no available space, Recording failed appears.
Page 204 Refer to steps 2 to 4 on P. 264 for details. Note The movie cut when attaching to mail is saved on the FOMA terminal handset. The original movie is saved in the location set for Switch main⇔SD. Bar Code Reader...
Page 205 Display bar code (JAN/QR code) to be read in the center of the screen. FOMA terminal automatically distinguishes between JAN code and QR code. Glossy paper may be difficult to read. Adjust angle so light does not reflect directly into camera.
Page 206 Data includes character strings (alphanumeric characters, kanji, kana, pictographs), images and melodies. The code on the left is read as FOMA SH902i. Split data QR code may be split into a multiple set of codes (maximum 16) which can be compiled into one set of data.
Page 207 Shoot printed data such as URLs, mail addresses, phone numbers and English words, and convert into text to be used by FOMA terminal. Use read text to connect to sites or web pages, or send i-mode mail. Use read text to also make voice/Videophone calls and PushTalk calls or search for words in a dictionary.
Page 208 For optimal scan, point the camera straight while maintaining a focal distance of approximately 10 cm. Keep both the text and FOMA terminal level without moving them. Viewed text may become small and hard to read. Adjust distance so the bar on the bottom of the screen turns a deep blue.
Page 209 Use scanned results. Press 31 → Yes → t. To add to To save new to Phone FOMA terminal Scanned text is entered in appropriate areas in the phonebook entry book handset screen. Continue phonebook saving operations. (nP. 108) phonebook Press 32 →...
Page 210 LMEMO9...
Page 211: I-Mode/I-Motion
i-mode/i-motion i-mode What is i-mode? ..........<i-mode>210 Viewing Sites Viewing Sites .
Page 212 (programs) and the refer to the back cover of this manual. Internet, and enables i-mode mail Note exchange. All FOMA services are available from date of Site (program) access subscription. Select メニューリスト (Menu list) from When changing from mova service (with...
Page 213 Other features 3 メニューリスト Access sites by genre/ (Menu List) location. Select site to i-motion access. Download images and sound from i-mode 4 とくするメニュー Access information on sites to play on the handset or set as stand-by. (Tokusuru Menu) exciting campaigns, nP.
Page 214 SSL-encrypted pages to send personal data, (Images/movies with restrictions for mail such as credit card numbers and postal attachment and output from the FOMA addresses, more securely so data cannot be terminal cannot be sent.) eavesdropped, spoofed or altered.
Page 215 2004. To reject Message F, set to 受信しない (Not Files cannot be played/viewed when a different receive) after purchase. FOMA card is inserted or handset is turned on ※ All other users must change Receive option with no card inserted.
Page 216 FOMA card. To view nP. 224 If files with access restrictions by a FOMA card are set as the stand-by display or ring tone, Note etc. and a different FOMA card is inserted or...
Page 217 (nP. 225) Some downloaded images may exceed the number of colors the FOMA terminal can show on the display. Press i [i-mode M] while showing a site. i-mode end confirmation screen appears. Select Yes to go to i-mode menu.
Page 218 Viewing images View images on sites/web pages, image mail and Message R/F. The FOMA terminal is compatible with images in GIF/JPEG format and Flash movies. (Some JPEG images may not appear.) z appears while receiving an image and the image is shown when receiving is complete.
Page 219 Do you connect? appears, the web page certificate has expired or uses a different certificate from the FOMA terminal’s certificate. When such messages appear, the page is not secure to send credit card numbers, postal addresses or other personal information.
Page 220 Default setting Changing Font Size <Font Size> Normal Set font size of sites, Internet web pages and screen memos. In stand-by, press i732 and select font size. Alternatively, select * (i-mode) → i-mode setting → Internet → Font size from Top menu. Press 1.
Page 221 Viewing Flash Movies <View Flash Movies> View Flash movies using the FOMA terminal. Flash technology combines pictures and sound into animation. Sites that use Flash movies are more expressive. Save in My picture of Data box and set as stand-by. (nP. 135, P. 357) View site, Internet web page or saved screen memo with a Flash movie.
Page 222 Selecting Links and Items When viewing sites or Internet web pages, view other screens from the current screen. This is called a “link”. Links usually appear blue. A selected link is highlighted. Some links may be images. When selected, the image is outlined. Selecting a link and moving to a new screen Linked page Press p to highlight the next link and o to highlight the previous link.
Page 223 Moving to Previous/Next Page (Cache, History) The FOMA terminal stores up to ten viewed sites or Internet web pages. This memory is called the “cache”. When viewing pages in the cache, press v to show the previous and next pages without connecting.
Page 224 C34 [Add to phonebook] and select a saving method. Press 1 [Save new to main]. To save new to FOMA terminal handset phonebook Press 2 [Save new to UIM]. To save new to FOMA card phonebook Press 3 [Add/overwrite].
Page 225 For Dual Network Service (nP. 448), マイメニュー (My menu) that was registered on a mova terminal may not be available on a FOMA terminal, and マイメニュー (My menu) that was registered on a FOMA terminal may not be available on a mova terminal.
Page 226 In stand-by, press i1 [iMenu] and press 82 [ｉモードパスワード変更] (Change i-mode password). Select 現在のパスワード (Current password) input field, press t, enter current i-mode password (four digits) and press t. The screen to input the current password appears. Select 新パスワード (New password) input field, press t, enter new i-mode password (four digits) and press t.
Page 227 After reloading or scrolling to the next/previous page, the site or web page is shown with original code. Viewing Pages from URL History <URL History> The FOMA terminal records up to nine Internet web pages accessed from Go to location of i-mode menu. Use the history to reconnect to those web pages.
Page 228 Note information saved in bookmarks separately or transfer/store them on a PC using miniSD Memory Cards (nP. 376) or Data Link Software (nP. 522). Saved content may be lost due to malfunctions, repairs or other handling of the FOMA terminal. DoCoMo shall not be liable for any loss of content.
Page 229 To view all saved bookmarks Press C6 [View miniSD data]. To use bookmarks on miniSD Memory Cards To use bookmarks on FOMA terminal handset again, press c twice. Bookmark folder list Select folder, press t, select bookmark and press t.
Page 230 Related Operations Delete folders <Delete> In bookmark folder list (nP. 227), select folder ? C2 [Delete]. Press 1 [Delete one folder] ? enter terminal security code (four to eight digits) ? t ? Yes ? t. To delete selected folders collectively: Press 2 ? enter terminal security code (four to eight digits) ? t ? select folder t (repeatable) ? C [Complete] ? Yes ? t.
Page 231 In stand-by, press i5. Alternatively, select * (i-mode) → Screen Memo from Top menu. Screen memo list appears. K (screen memo) Standard screen memo | (screen memo) Protected screen memo y (screen memo) FOMA card restriction (nP. 39) is set. Screen memo list...
Page 232 Saving still pictures Refer to P. 231 for details. Composing new mail with image Files with restrictions for mail attachment and output from the FOMA terminal are not sent. Refer to P. 237 for details. Adding to the phonebook Refer to “Saving Phone Numbers and Mail Addresses in the Phonebook” on P. 222.
Page 233 Deco-mail templates are saved in Template of the Mail menu. (nP. 271) Save up to 1,000 images on FOMA terminal handset. Saved amount may vary depending on available memory. Available file sizes and types are GIF images (100 KB), JPEG images (100 KB) and SWF images (Flash) (100...
Page 234 Example: When saving from sites and Internet web pages While viewing sites or Internet web pages (nsteps 1 to 3 on P. 215, steps 1 and 2 on P. 224), press C32 [Save image]. Select image, press t, select folder and press t. Saving and Saved to XXX appear.
Page 235 When downloading PDF files that are 500 KB or more, a confirmation screen asking Content length exceeds 500KB. Download? appears. Save up to 50 PDF files on the FOMA terminal handset. (Capacity varies depending on size of PDF file.) PDF files with unknown file size cannot be downloaded.
Page 236 When saving is completed, PDF file appears. When password is set, enter password and press t to view PDF file. If available space on the FOMA terminal handset is insufficient, delete unnecessary files and increase memory space to save. Note When the number of bookmarks or marks exceeds ten when saving or ending, 10 bookmarks exceeded.
Page 237 Download Dictionary Downloading Dictionaries from Sites Download dictionaries from sites or Internet web pages to register in the FOMA terminal. Save up to ten Download dictionary files. (Up to five can be used.) Save Downloaded dictionaries of up to 6 KB.
Page 238 Download Chara-den Downloading Chara-den from Sites Download and save Chara-den from sites or Internet web pages. Download Chara-den up to 100 KB. Save up to 50 Chara-den files. (The amount depends on available memory.) Files are saved to the i-mode folder in Chara-den of Data box. Default Chara-den can be downloaded from the SH-MODE site in iMenu.
Page 239 Select phone number from site, Internet web page, Message R/F, mail or ToruCa, press t, select Yes and press t. The phone number appears on the screen. When phone number is saved in the phonebook, the name and phone number appear. Make a call.
Page 240 Note Send GIF or JPEG images. Flash movies cannot be sent. Files with restrictions for mail attachment and output from the FOMA terminal are not sent. Using i-appli To Start i-αppli from URLs in sites, Internet web pages, mail or screen memos.
Page 241 Related Operations Save a still picture from URL in mail message <Save image> Select URL ? t ? i [Yes] ? C32 [Save image] ? t ? select folder ? t. Note The still picture is saved in the i-mode folder in My picture of Data box. Setting i-mode Set various functions relating to i-mode access.
Page 242 ※ Settings do not need to be changed to use i-mode. ISP connection transmission When changing FOMA terminal host, connect to various providers (ISP). Subscription to Packet Transmission Service is required to use ISP connection transmission. Packet transmission charges apply for ISP connection transmission.
Page 243 Changing hosts Save hosts in advance in order to access. In stand-by, press i712. Host selection screen appears. Select the host number, press t and 1 [Set]. The host is changed. When i-mode (UIM) is selected and t is pressed, i-mode (UIM) selected appears and the host is changed.
Page 244 Default setting Setting to Receive/Reject PushTalk Transmissions PushTalk preferred During i-mode Transmissions <i-mode Arrival Action> Set to not receive PushTalk transmissions during i-mode. In stand-by, press i74 and 2 [i-mode preferred]. Alternatively, select * (i-mode) → i-mode setting → i-mode arrival act from Top menu. Resetting i-mode Settings <Reset i-mode>...
Page 245 Message R/F is automatically received from the i-mode center when the FOMA terminal is in the service area. Save up to 50 messages each in the FOMA terminal. (Capacity varies depending on size of message.) Message R/F is held at i-mode center when one of the following occurs.
Page 246 Message R/F appears for approximately 15 seconds and the stand- by display reappears (when set to automatically display). To continue viewing the message, press u and scroll while viewing Message R/F. Default setting Automatically Displaying Message R/F Msg R preferred <Auto Message Display>...
Page 247 In stand-by, press i4 or m7. Alternatively, select * (i-mode) or : (Mail) → Check new message from Top menu. Or, check by pressing m twice. New messages are checked for. Check new message (nP. 302) is performed in accordance with settings from i-mode mail → MessageR →...
Page 248 Messages List/Details Screen Layout Messages list layout 1 Unread/Protected message icon a/[: Unread Message R/F 9/N: Unprotected read Message R/F O/J: Protected read Message R/F 2 Message R/F list screen page number/total 3 Melody/Image When melody/image is attached to the message, *, A (blue) or C (blue) appears.
Page 249 Note Some images may not be downloaded properly even after reloading. Checking/Saving Attachments <View Attachment> Check or save images and melodies attached to Message R/F. Images are saved to i-mode folder in My picture and melodies are saved to i-mode folder in Melody of Data box. In messages list (nP.
Page 250 All enabled The following certificates are required to view SSL pages. CA certificate..Certificate issued by a certification company that is registered in the FOMA terminal by default. DoCoMo certificate..Certificate registered in FOMA card (green) required to connect to FirstPass center or FirstPass compatible sites.
Page 251 After entering PIN2 code, all actions are presumed to be performed by the user. Keep FOMA card and PIN2 code private. If FOMA card is lost or stolen, contact “For General Inquiries” on the back of this manual and cancel Client certificate.
Page 252 Applying for Client certificate and downloading Apply for Client certificate before downloading. Access FirstPass center (nsteps 1 and 2 of “ Accessing FirstPass center” on P. 249), select Request your certificate and press t. Select Continue and press t. Enter PIN2 code (four to eight digits) and press t. Refer to P.
Page 253 Select Yes, press t, enter PIN2 code (four to eight digits) and press t. When authentication succeeds, SSL-enabled site or Internet web page appears. Refer to P. 156 for details on PIN2 code. Note When access to a FirstPass compatible site or Internet web page is attempted without Client certificate, You have no certificate.
Page 254 Streaming refers to simultaneous playback while downloading data. When playback is complete, the played data is discarded, and cannot be played again or saved to the FOMA terminal. Even if Automatic replay (nP. 255) is set to No, Streaming type i-motion are automatically played.
Page 255 Ring tone and Receive display combinations When i-motion is set as the ring tone and receive display, the combinations and actions are as follows. Type of ring tone and Type of ring tone Type of receive display receive display when received JPEG image, GIF image, i-motion without Ring tone: Melody Melody...
Page 256 Weak signals may stop playback or distort the image during i-motion download. Date and time information on FOMA terminal may be reset after the battery pack has been removed for a long time. In such cases, playback for i-motion with an expiration date or replay period is not available.
Page 257 Note i-motion saved can be played using Video player (nP. 363). Some downloaded i-motion cannot be saved to the FOMA terminal. When a Ticker Contains a Link When a link is present in the ticker during i-motion playback, Phone To (AV Phone To), Mail To or Web To may be available.
Page 258 i-motion Type Default setting Setting i-motion Type to Download Standard type Set whether to download only Standard type i-motion or to download both Standard type and Streaming type i-motion. In stand-by, press i7342 and select i-motion type. Alternatively, select * (i-mode) → i-mode setting → Internet → i-motion setting → i-motion type from Top menu.
Page 259: Mail
Saving SMS (Short Messages) to FOMA Card ....... . .
Page 260 (Up to 500 single-byte/250 double-byte characters) mova service i-mode terminal FOMA terminal * Short mail is a text messaging service for DoCoMo mobile phones. Short mail cannot be sent from a FOMA terminal. Note Note information in i-mode mail and SMS separately or transfer/store them on a PC using miniSD Memory Cards (nP.
Page 261 i-mode Mail i-mode Mail Sending mail nP. 263 Subscribe to i-mode service to exchange Receiving mail nP. 277 mail with other i-mode terminals (including mova) and e-mail with PCs via the Internet. Receive option The mail address upon subscription is as Check subject and choose to receive or delete follows.
Page 262 ② Receive/Reject Selected Mail Double-byte Single-byte (メール受信設定 <受信／拒否設定> O アド (kanji, (alphabet, Item hiragana, numbers, レス指定受信、アドレス指定拒否) pictographs) katakana) Receive/Reject mail from specified mail Subject 15 characters 30 characters addresses. ③ Receive/Reject only i-mode mail Mail address 50 characters (メール受信設定 <受信／拒否設定> O Message 5,000 10,000...
Page 263 Send and receive melody files downloaded from sites or Internet web pages. (Melodies with restrictions for mail attachment and output from the FOMA terminal are not sent.) Mail with image attachment, To send nP. 273 image URL or image icon To receive nP.
Page 264 SMS is deleted from SMS center when retrieved i-motion mail supported terminals can receive by FOMA terminal. Retrieved SMS is saved on movies of up to 500 KB. Downloaded movies are FOMA terminal. (nP. 313) Retrieved SMS can automatically converted to fit the display size of be copied to FOMA card.
Page 265 Mail Menu Displaying Mail Menu Create and view received and sent i-mode mail from Mail menu. In stand-by, press m. Alternatively, select : (Mail) from Top menu. Mail menu appears. Menu Function Reference U Inbox View, reply to, and forward received mail. P.
Page 266 Select To, press t and select input method. To select from phonebook Press 1 → select recipient → t. To select another address, select recipient, press i [Confirm], select mail address and press t. If a mail address icon (U, S, 7, B, T) does not appear, a mail address is not saved.
Page 267 In message entry screen, press C7 [Insert phrase] → To use phrases select type of phrase → t → select phrase → t → Refer to P. 511 for details on phrases. In compose message screen, press C8 [Add signature] or To add signature press Cr2 [Add signature] in message entry screen.
Page 268 Error messages such as for unknown recipients are sometimes not received when sent to a non-DoCoMo mail address. Broadcast Send same i-mode mail to multiple addresses simultaneously from FOMA terminal. Send to up to five people at once. Select sending type (To/Cc/Bcc) in Broadcast entry field.
Page 269 Deco-mail Creating and Sending Deco-mail Change color and font size of message text, insert image or change background color when creating i-mode mail. Decorations and effects Create Deco-mail of up to 10,000 bytes including attachments. Message text cannot be decorated when the remaining bytes is zero or a negative number.
Page 270 Note Inserting images Images (Deco-mail pictures) are preset in the FOMA terminal. (nP. 513) Insert up to 10,000 bytes of images in message entry screen. For different images, insert up to ten images. If the same image is inserted, ten or more may be inserted. Images are only deemed identical when copied and pasted if compose message screen is returned to and message entry screen is re-entered.
Page 271 Note If Deco-mail is sent from a Deco-mail supported terminal to an unsupported terminal (mova or FOMA models prior to the 900i series), a URL is sent in the message text. The recipient must click on the URL to view Deco-mail on the Internet.
Page 272 Note Decorations and inserted images are quoted when replying with quote or forwarding Deco-mail. Decorated mail sent from devices other than Deco-mail supported FOMA terminals may not appear correctly. When decorated text is inserted, status icon changes to U.
Page 273 Setting range and decorating Specify portion of message and decorate or change specified decoration. In the palette screen (nP. 269), press m [Sel area]. Alternatively, press Cr2 [Edit decoration] in the palette screen. Message entry screen appears. Move the cursor to location to start decorating and press t [Begin]. To select all text, press m [All].
Page 274 Select template, press t [Agree] and press i [Mail]. Compose message screen appears. Template is reflected in message entry screen. Editing is the same as for normal Deco-mail. Refer to P. 267 for details. BVIG Note If an image with file restrictions is inserted into a template, a message appears and the image is deleted. Oversized templates are not opened.
Page 275 Title, file name, file format and file restrictions appear. Attachments Attaching a File Attach and send still pictures and movies shot with FOMA terminal, images downloaded from sites and Internet web pages, i-motion, melodies and ToruCa. Attach standard files and large files to the same mail.
Page 276 Flash movies, frames and stamps cannot be attached. Melody may not be played properly if other party is using a model released prior to FOMA SH900i. Files with restrictions for i-mode mail attachment and output from the FOMA terminal are not sent.
Page 277 Note Images shot with FOMA terminal that have file restrictions are sent but cannot be forwarded by the other party. Some i-motion are not available. Image quality may deteriorate or movies may be changed to continuous still pictures depending on the other party’s handset model.
Page 278 Saving i-mode Mail Press C2 [Save] while composing i-mode mail (nsteps 1 to 3 on P. 263). i-mode mail being composed is saved as an unsent message. Save up to 10,000 bytes with attachment and message for standard i-mode mail. Save up to 521,800 bytes including message text when large attachment files (still pictures and i-motion) are attached.
Page 279 Mail ring tone does not sound when mail is received while a call is in progress, while running i-αppli or when the camera is activate. Copy mail from FOMA terminal handset to miniSD Memory Card or from miniSD Memory Card to FOMA terminal handset.
Page 280 (nP. 304) is set to not receive image. Check if i-mode mail received from FOMA terminal and PCs were received as To, Cc or Bcc. (nP. 291) While mail PIM is locked, mail receive results and Message R/F do not appear automatically even if i-mode mail or Message R/F is received.
Page 281 Checking for new mail with vibrator When in stand-by, press x (shutter) with the FOMA terminal closed to use vibrator as an alert for missed calls, Record message, new ToruCa, new mail and voice mail messages. If there are any, Pattern 1 will activate twice.
Page 282 Select |, press t, select > and press t. To re-select mail to receive/delete, select ) and press t. Open received i-mode mail. (nsteps 3 and 4 on P. 278) Related Operations Selectively receive mail from i-mode menu list <Receive option> In stand-by, press i ? iMenu ? t ? 3メニューリスト...
Page 283 In the receive results screen, select Mail and press t. Inbox list appears. Folders containing unread mail are pink. If no operations are performed in the receive results screen for approximately 30 seconds, the previous screen reappears. Stays in i-mode stand-by (7 flashes). Message R/F received after checking for new messages does not automatically open.
Page 284 Note Press H while composing i-mode mail and end confirmation screen appears. Select Yes to cancel composing message. Canceled mail is not saved. If H is pressed in unedited reply screen, end confirmation screen does not appear. Subject for reply mail is the received mail Subject with Re: entered at the beginning. If subject (including Re:) exceeds 30 single-byte (15 double-byte) characters, exceeding portion is deleted.
Page 285 For received messages, mail addresses that exceed 50 single-byte characters cannot be saved. Not available while Keypad dial lock is set. New phonebook entries cannot be saved if there are 750 entries in FOMA terminal handset phonebook or 50 entries in FOMA card phonebook already saved.
Page 286 Press 1. To save new to FOMA terminal handset phonebook To save new to FOMA card phonebook Press 2. Press 3 → select name → t. To add/overwrite phonebook Selected phone number or mail address is entered in phonebook entry screen. Continue phonebook saving operations.
Page 287 Note i-motion download is canceled when a voice call is received immediately after download starts. i-motion mail sent to an i-mode terminal that is held at the i-motion mail center can be retrieved 50 times for each URL. After the 50th time, i-motion retrieval is no longer possible. Compliant software is necessary for i-motion playback on PC or other devices.
Page 288 Manage received/sent/unsent i-mode mail and SMS in folders. Folders can be created on the FOMA terminal handset. The FOMA terminal handset and FOMA card each have Outbox and Inbox folders. Sent mail in Outbox of both FOMA terminal handset and FOMA card are shown together in Outbox folder. The same applies for Inbox folder.
Page 289 Select folder, press t, select i-mode mail or SMS and press t. Message content appears. To view mail in mail-type i-αppli folder, select folder, press C, select View i-mode mail, press t, select i-mode mail and press t. Press H. To end viewing Press c →...
Page 290 Copy i-mode mail and SMS data saved on the FOMA terminal handset to miniSD Memory Cards (nP. 379) or view i-mode mail or SMS saved on miniSD Memory Cards (nP. 381). Copy i-mode mail and SMS data saved on miniSD Memory Cards to the FOMA terminal handset (nP. 382). Ir exchange Using Ir exchange, send i-mode mail and SMS data saved on FOMA terminal handset or receive i-mode mail and SMS data.
Page 291 W: Sent SMS on FOMA card V: i-mode mail sent with mail-type i-αppli S: i-mode mail sent with mail-type i-αppli (protected) In Outbox folder, i-mode mail and SMS in Outbox on the FOMA terminal handset and on FOMA card are shown together. 2 Folder name Shows up to the first 18 single-byte (9 double-byte) characters.
Page 292 \ : Replied to (protected) M : Forwarded ] : Forwarded (protected) In Inbox folder, i-mode mail and SMS in Inbox on the FOMA terminal handset and on FOMA card are shown together. 2 Folder name Shows up to the first 18 single-byte (9 double-byte) characters.
Page 293 Received message view layout 1 Folder name Appears according to font size settings. Large font: 11 single-byte (5 double-byte) characters Standard: 15 single-byte (7 double-byte) characters Small font: 18 single-byte (9 double-byte) characters 2 Protected icon Appears when protected. 3 Shows receiving type (To/Cc/Bcc) 4 Received date (Shows date and time received at i-mode center or SMS center.) 5 Sender...
Page 294 Managing Mail Delete, sort and separate received/sent/unsent i-mode mail and SMS into folders. Up to 20 folders (not including Inbox, Outbox, Drafts and mail-type i-αppli folder) can be created, renamed and deleted. (However, names for Inbox, Outbox and Drafts cannot be edited or deleted.) Delete all is not available for protected mail.
Page 295 Sent/Unsent messages Delete method Explanation Screen Delete one folder Deletes folders individually. Folders containing protected sent or unsent i-mode mail/SMS cannot be deleted. Delete selected Deletes selected folders collectively. Folders folders containing protected sent or unsent i-mode mail/SMS Outbox list cannot be deleted.
Page 296 Sorting messages For sent messages/unsent messages Date (new→old) Latest sent/saved date first Date (old→new) Latest sent/saved date last Depending on mail address, sorted by numbers → upper case alphabet → lower By address case alphabet Messages are sorted by subject in the following order: Single-byte (symbols → By subject numbers →...
Page 297 Related Operations Move mail to another folder <Move> In received messages list (nP. 290), sent messages list (nP. 289) or unsent messages list (nP. 291), select mail ? C31 [Move]. Press 1 [Move one]. To move selected messages in a folder collectively: Press 2 [Move selected] ? select message t (repeatable) ? C [Confrm].
Page 298 Already received i-αppli mail can be manually sorted into the folders automatically created when downloading a mail-type i-αppli. Protecting mail SMS on FOMA card cannot be protected. Copying a protected SMS to FOMA card will disable protection. Deleting mail When collectively deleting multiple mail, protected i-mode mail, SMS and FOMA card SMS are not...
Page 299 When Del all(del fol) is selected, only unprotected i-mode mail and SMS is deleted. Folders containing protected i-mode mail and SMS will not be deleted. When all mail in a folder is collectively deleted from the message list, SMS on FOMA card is also deleted.
Page 300 Select SMS history and perform operation to save phone number. Select a saving method. Press 1. To save new to FOMA terminal handset phonebook Press 2. To save new to FOMA card phonebook Press 3 → select name → t.
Page 301 Using Sent messages history to send mail In stand-by, press r (I) i [SentHist]. Sent messages list appears. Smaller numbers in the upper right part of the display represent newer sent messages. Show sent msgs set to OFF appears when Show sent messages is set to OFF.
Page 302 Sort by groups set in FOMA terminal handset phonebook. Subject Sort by text in subject. Phonebook empty Sort mail from senders not saved in FOMA terminal handset phonebook. Sort only sent mail containing addresses not saved in phonebook. All received (sent) messages Sort all received (or sent) mail.
Page 303 Repeat step 2 to set multiple rules. Press i [Complete]. Note Mail from senders saved in FOMA card phonebook are sorted as Phonebook empty. i-αppli mail is sorted to the compatible mail-type i-αppli folder regardless of Sort rules. Deleting specified sort rules Sort rules can be deleted.
Page 304 Default setting Adding Signature to i-mode Mail <Save Signature> Add a signature to notify name, phone number and mail address. Set to automatically add signature when composing i-mode mail. Only one signature can be saved. Signature cannot be added to chat mail or SMS. In stand-by, press mr2r2.
Page 305 Creating Mail Member List <Mail Member> Save multiple addresses for a mail member to easily specify multiple addresses. Unlike Broadcast mail, multiple addresses are specified collectively. Save up to five mail addresses per mail member. Save up to ten mail members. Charges are the same as when sending one mail.
Page 306 Select mail address, press C and select deletion method. Press 1 → Yes → t → i [Complete]. To delete one mail address Press 2 → Yes → t → i [Complete]. To delete all mail addresses Delete all addresses for specified mail member. Default setting Setting Whether to Automatically Replay Melody Auto replay...
Page 307 Note If set to Not receive, attached files cannot be received at a later time. Attached files are deleted at the i-mode center. Notification is not sent when attachments are deleted. For Message R/F, all attached files are received regardless of settings. Melodies in MFi format pasted in the message text are received regardless of settings.
Page 308 Create/Send Chat Mail Creating and Sending Chat Mail Chat by exchanging mail with multiple parties. Requires saving other party’s mail address to Chat mail member in advance. User’s mail address shown in chat mail member setting screen is linked to Owner information. (nP. 430) Register up to six members including self.
Page 309 Saving and disabling a chat mail member Select member to set in member setting screen and press t. E appears for selected and H appears for unselected entries. Press t to switch. Select all chat mail parties and press i [Complete]. Note Inbox, Outbox and Unsent messages cannot be opened during Chat mail.
Page 310 Note Received chat mail is saved in Inbox as read mail. Mail is saved to set folder according to Sort rules (nP. 301). Phone To (AV Phone To), Mail To, and Web To (nP. 236) functions are not available even if a phone number, mail address or URL is included in a chat mail message.
Page 311 Select No and press t. Chat mail ends. To delete and end Chat mail, select Yes and press t. Note If Chat mail is ended without deleting mail, the next time Chat mail is activated, the previous mail is shown. Starting Chat Mail from Received Mail <Start Chat Mail>...
Page 312 Editing Members Edit a chat member’s name or address. User cannot edit own mail address. In stand-by, press m6 and C4 [Set members]. The member setting screen appears. Select a member and press C2 [Edit]. Edit names and mail addresses and press i [Complete] twice. Refer to steps 3 and 4 on P.
Page 313 Default setting Changing Chat Mail Font Size <Font Size> Normal In stand-by, press m6 and C7 [Font size]. Normal Small font Default setting Setting Chat Mail to Start Automatically <Auto Start> Set to automatically open chat mail screen when mail with チャットメール (Chat mail) (all single- byte or all double-byte) in subject is received.
Page 314 The FOMA terminal receives Short mail from mova service i-mode terminals as SMS. Up to a combined total of 20 received and sent SMS can be saved on the FOMA card. Unsent SMS cannot be saved on the FOMA card.
Page 315 Receiving SMS (Short Messages) SMS is automatically received. Up to a combined total of 100 to 1,000 received SMS and i-mode mail can be saved on the FOMA terminal handset. (Capacity varies depending on size of received messages.) SMS is automatically received.
Page 316 When sent SMS are copied to FOMA card, the delivery reports are also copied. SMS cannot be received when FOMA terminal handset and FOMA card memory are full with only SMS. When Handset memory is full. Unable to receive anymore or UIM is full. Unable to receive anymore appears, delete received SMS on FOMA terminal handset and FOMA card.
Page 317 Quick reply is not available for SMS. SMS from User unset/Payphone/Not support cannot be replied to. If SMS in reply to FOMA card SMS is saved while being composed, the SMS is saved as unsent SMS on the FOMA terminal handset.
Page 318 Note Delivery reports are received as SMS. Report request can be set for each individual SMS. A delivery report by itself cannot be copied to FOMA card or miniSD Memory Card or be sent by Ir data transmission. Default setting Setting SMS (Short Messages) Expiration Date <SMS Expiry>...
Page 319 Saving SMS (Short Messages) to FOMA Card Copy SMS saved in FOMA terminal handset to FOMA card. Up to a combined total of 20 received and sent SMS can be saved to FOMA card. Insert FOMA card in advance. Copying SMS (Short Messages) to FOMA Card Copy SMS from FOMA terminal handset to FOMA card.
Page 320 Note Overwrite copy is not available. Copying is canceled when the save limit for FOMA terminal handset (up to a combined total of 1,000 for i-mode mail and received SMS, up to 200 for sent SMS) is reached. Delete SMS...
Page 321: I-Appli
i-appli i-αppli ............<i-αppli>320 i-αppliDX .
Page 322 Link i-appliDX with various information on the convenient use of the i-mode compatible i-mode terminal (mail, call/received history, FOMA terminal (i-mode terminal). Download phonebook data, etc.) and have animated various games to the i-mode terminal. Also, characters assist in composing messages and download market information i-appli and inform who incoming callers are.
Page 323 Downloading i-appli from Once downloaded, some i-αppli software may Sites continue transmitting data automatically. The FOMA terminal must be set up in advance to use Download i-appli software from sites and web this service. pages, and run the software on the FOMA Terminal security code entry screen appears when i-αppli software is downloaded while i-αppli PIM is...
Page 324 Data box and i-αppli share memory area. Depending on the amount of data saved in Data box, i-αppli software may not be saved. Run (start) an i-appli saved in the FOMA Save downloaded i-αppli of up to 520 KB each. terminal.
Page 325 (shutter) ? select software ? x (shutter). (nP. 429) To end software: While software is running, open FOMA terminal, press H ? Yes ? t . Software info The information that appears in the description includes the software name, version, storage,...
Page 326 This setting is valid only for software that accesses the instructions on the screen to select the software. phonebook and history information. If the software to start is not saved in the FOMA Yes is set when software is downloaded. terminal, download the software.
Page 327 Displaying program information Default Software Changing program information The following software are preset. Program information and advertisements appear To use again after deleting, on the main screen. Press u to select channel download preset software from while program information is selected. Press v the iMenu site, SH-MODE.
Page 328 1 Hole data: Shows the distance (in yards) and number (EVERYBODY’S GOLF) of strokes for par for the current hole. series, on the FOMA terminal. 2 Flag: Shows the current hole number and amount of wind. 3 Score: Shows the current stroke number and score.
Page 329 For service details regarding Electronic money Edy, Note available stores and Edy processing for FOMA model changes, breakdowns or loss, access the Edy web page みんなのGOLFモバイル２ for SH uses GIF data or i-mode site, or contact the following number.
Page 330 Enabling Auto start setting for Auto start using Set time, date and day for i-αppli saved the FOMA in FOMA terminal to set Auto start. Set supported software terminal setting Auto start to ON and set schedule to use. Register up to nine.
Page 331 Depending on the site, the specified i-αppli software during Ir exchange, when the start signal is can be downloaded if it is not saved on the FOMA read by the Bar code reader or when the terminal or if a newer version is available for the FeliCa mark is held up to the reader/writer software saved on the FOMA terminal.
Page 332 Managing i-appli Using Mobileaudio Changing i-αppli settings Upgrade, delete and sort i-appli saved in the Playing i-motion FOMA terminal and view run error and trace Using ToruCa Using Ir exchange information. Downloading i-αppli software Additionally, show i-appli on a TV screen.
Page 333 Note (Related operations) information. Upgrading i- ppli If there is no trace information, No Trace info i-αppli cannot be upgraded when the FOMA available appears. terminal handset does not have enough available Note memory. Delete other software or data in Data box that shares memory area with i-αppli.
Page 334 To save the image, press t [Save]. Note Using Various i-appli Functions Some software may automatically send images Depending on the function, other functions may need and entered data used with i-αppli over the to be ended before using. Internet. Images used with i-αppli include images Viewing Sites from i-appli shot using the camera function operated with i-αppli, images selected from My picture of Data...
Page 335: I-Channel
i-Channel i-Channel ........... . <i-Channel>334 Showing i-Channel .
Page 336 i-Channel has a “ベーシックチャネル (Basic i-Channel channel)” and “おこのみチャネル (Custom i-Channel channel)”. “Basic channel” is a pre-registered channel provided by DoCoMo and is available i-Channel is a service provided by DoCoMo or immediately. Packet transmission charges for IP (Information Provider) that sends news, automatically updating information provided by weather and other information graphically to “Basic channel”...
Page 337 Generally, the trial service begins after inserting Note the FOMA card and beginning use of the i-Channel ticker does not appear when i-Channel i-Channel supported handset. If the service does host is changed. However, when the channel list is not begin automatically after some time, press the viewed, the latest information is received and i-Channel supported key.
Page 338 LMEMO9...
Page 339: Mobile Wallet/Toruca
Mobile Wallet/ToruCa Mobile Wallet Mobile Wallet ............338 Starting Mobile Wallet Compatible i-αppli .
Page 340 Mobile Wallet compatible services being used. Mobile Wallet malfunctions, repairs, FeliCa, using non-contact IC card technology, changing FOMA terminal or other handling may cause enables reading and writing of data without data saved in the IC card to be altered or lost. (Note direct contact.
Page 341 Operations after a call is ended vary (external device). depending on the service being used. Hold the FOMA terminal up to the center of the reader/ When a call is received while software is writer (external device). running, the software is interrupted. After the If you hold the FeliCa mark up to the reader/writer call is ended, the software resumes.
Page 342 Retrieving from Reader/Writer ToruCa list. Press (External Device) 詳細 (Details) key to view further details. Hold the FOMA terminal up to the reader/writer (external device) and retrieve ToruCa. In the confirmation screen, select Yes and press t. The ToruCa details screen appears.
Page 343 Copy ToruCa saved on miniSD Memory Card to Terminal security code is required to view ToruCa list for all folders if Folder security is set. the FOMA terminal handset. (nP. 382) ToruCa list and details screen are not available for Ir exchange folders if Folder security is set.
Page 344 <PIM lock> In stand-by, press t923 ? handset phonebook. To add to the FOMA card phonebook: Press 2. C7 [PIM lock] ? enter terminal security code To add/overwrite phonebook: Press 3 ? (four to eight digits) ? t ? 1 [ON].
Page 345 Related Operations Delete, move, copy, and sort ToruCa and ToruCa Protect ToruCa <Protect> (details) in the FOMA terminal or miniSD Memory In stand-by, press t923 ? select Card. folder ? t ? select ToruCa ? C1 [Protect]. miniSD Memory Cards are sold separately.
Page 346 C4 [Retrieve from IC]. Searching ToruCa Press 2 [OFF]. Search ToruCa by category, index or title. ToruCa saved in the FOMA terminal is applicable. IC Card Lock In stand-by, press t923, Locking IC Card Functions select folder and press C3 [Search].
Page 347: Full Browser
Full Browser Viewing Web Pages Designed for PC ........346 Setting Full Browser .
Page 348 PCs with the Window list appears. Switch windows. FOMA terminal using the Full Browser. Move to top of the screen. Some Internet web pages with large amounts of Open link in new window.
Page 349 When scrolling through pages, if the page is no longer Full Browser Display in the cache, the FOMA terminal cache size is Basic operations for Full Browser are the same as exceeded or the page is set (created) to always...
Page 350 Root certificate has expired. Do you connect? appears, the web page certificate has expired or uses a different certificate from the FOMA While viewing an Internet web page terminal’s certificate. with Full Browser (nsteps 1 and 2 When such messages appear, the page is not secure on P.
Page 351 Closing a window Select Yes and press t. Close the active window. Download file? appears. Select Yes and press While viewing an Internet web page with Full Browser (nsteps 1 and 2 When finished downloading, select on P. 346), press C73 [Close Save to ext mem and press t.
Page 352 Cookies temporarily record information such as user name, date/time and number of accesses in Select Yes and press t. the FOMA terminal when an Internet web page is connected. This information is used when the Internet web page is accessed again. Record...
Page 353 The browser uses the “Referer” field to send the referring URL (server) to the destination’s server when following links in Internet web pages. The FOMA terminal Full Browser also features this function. Set to send, send after confirmation or not send.
Page 354 LMEMO9...
Page 355: Displaying/Editing/Managing Data
Copying from FOMA Terminal to miniSD Memory Card ... <Copy to miniSD>379 Backing Up FOMA Terminal Handset Data ..... <Backup/Restore>380 Previewing miniSD Memory Card Data .
Page 356 Internet web page. shooting screen The current file location (FOMA terminal handset or (nP. 180). miniSD Memory Card) is saved even if Image List of folders in My picture of Data box Viewer is ended, and is used the next time Image appears.
Page 357 1 Shows folder list of FOMA terminal handset Related Operations 2 Folder for still pictures shot with FOMA terminal, DCF compliant JPEG and GIF images excluding animated GIF. When a still picture is shot or is copied from the Note (Related operations)
Page 358 Set Playback light <Backlight time> attachment and output from the FOMA terminal. While playing back or stopped (paused) 2 appears for still pictures downloaded with i-mode Flash movie, press C7 [Backlight time].
Page 359 P. 354), or press C4 [Set screen] for Flash movies. Available still pictures are those received via i-mode mail as attachments, shot with FOMA terminal and Select screen item and press t. downloaded from sites that do not have restrictions for mail attachment and output from the FOMA terminal.
Page 360 Press dial key (1 to 9). Some images cannot be edited depending on the size (Editing type buttons correspond to keypad layout.) of still picture shot with the FOMA terminal. Select another editing type to continue editing Some images downloaded from sites or Internet web same still picture.
Page 361 Press 1. Icon (76×76) Save still picture. Press 2. sQCIF (128×96) Press i [Complete] → Yes → To save still Press 3. QCIF (176×144) t → OK → t. picture Press 4. Stand-by (240×320) Press i [Complete] → Yes → To change title Press 5.
Page 362 Resizing appears and edited still picture In the editing screen (nP. 358), appears on the right. press C41 [Image effect] and Still picture is enlarged or reduced. Still picture select the type of effect. is centered and margins are added to top and bottom if height is less than size.
Page 363 Face contour is automatically extracted, Press C [Complete] and save still Processing FX appears and processed still picture. picture appears on right. Refer to step 2 of “Rotating Still Pictures” on When facial contours are not properly extracted, press Cr1 [Undo], select Yes and press P.
Page 364 Press C and select font color. Pasting Image Stamps <Image Stamp> Paste preset and downloaded image stamps Press 1. Orange such as stars, flowers and kiss marks. Press 2. Black Still pictures larger than VGA: 480×640 are not available. Press 3. White Press 4.
Page 365 Playing Movie/i-motion paused, or stopped. Movie/i-motion is played back Play back movies shot with FOMA terminal horizontally full-screen. Press i ( \ for 1+ seconds in and i-motion downloaded from sites and viewer position) or stop...
Page 366 In movie/i-motion folder list (nP. 363), Movies saved to miniSD Memory Cards from press C42 [Set volume]. external devices can be played back on the FOMA To set in the image list (nP. 363): Press terminal. (nP. 521) C84 [Set volume].
Page 367 Display light time (nP. 141) 1 Shows folder list of miniSD Memory Card passes, the backlight remains lit until movie/ 2 Folder for movies shot with FOMA terminal i-motion is ended. 3 Folder for movies/i-motion downloaded from sites and...
Page 368 Settings are applied to all folders. Icon Sample Sets maximum playback time. playback (Transitions are not included.) y appears for i-motion with FOMA card restrictions Settings are applied to all applied. folders. m appears for movie/i-motion set as stand-by, Transitions Sets transitions between Random Picture call, ring tone or Select ring tone, alarm, movies.
Page 369 Sample playback Compose message screen appears. In stand-by, press t912, Selected movie/ select folder and press C33 i-motion is attached. Select For mail (short) [Sample playback]. or For mail (long) if movie/i-motion exceeds Select playback time. 300 KB. Press 1. Select For mail (short) 5 seconds and press t to cut out the first 290 KB...
Page 370 Edit ticker, Edit voice and Insert effect are available Note only for QCIF: 176×144 or sQCIF: 128×96. Only data saved on the FOMA terminal handset Edit ticker, Edit voice and Insert effect are not can be set as the stand-by display.
Page 371 Memory Cards. Handle captured still picture as those shot with Press C8 [Save] → FOMA terminal. Attach to i-mode mail and send. To attach to Compose message → t → i-mode mail and Capture still is not available for voice only data.
Page 372 Press t [Play], press t [Pause] Note at spot to enter ticker and press Edited data cannot be used for settings such as i [Origin]. ring tones. Press v and adjust frame before pressing Editing Voice <Edit Voice> i [Origin]. Press for 1+ seconds to fast Add audio to movies.
Page 373: What Is Chara-Den
FOMA terminal cannot be sent.) Check and shoot Chara-den’s movements anytime with Chara-den player. Chara-den are preset on the FOMA terminal, but can also be downloaded from sites and Internet web pages. (nP. 236) Keypad sound is not active when operating character during Videophone call (nP.
Page 374 Press m [Action] or p, select Related Operations action and press t. Set Chara-den as Videophone substitute To show action list image <Substitute image> details, press i During playback, press t [Save] or C31 [Details]. [Substitute image]. Performs the selected To set from Chara-den list: Select Chara-den ? action.
Page 375 Press t [Y] and t [Save]. Note Press t immediately after performing action Keypad sound is not emitted during Chara-den to shoot. movie recording, but sounds from operating keys may be recorded. Still picture is saved. Shooting movies Managing Chara-den Record Chara-den and save as movies.
Page 376: Playing Back Melodies
? t. Saved content may be lost due to malfunctions, Select Yes ? t. repairs or other handling of the FOMA terminal. To not delete: Select No ? t. DoCoMo shall not be liable for any loss of content. Set melody as ring tone. (nP. 376) View Chara-den properties <File property>...
Page 377 3D data is included. 5 Playback effects are not set. Icon Melodies play in monaural y appears for melodies with FOMA card restrictions Playback format that offers rich, vibrant sound. Playback format that does not feature rich sound. applied.
Page 378: Minisd Memory Card
Do not remove miniSD Memory Card while editing data on a miniSD. Also do not turn off the FOMA In stand-by, press t913, terminal or miniSD inserted device while editing data. select folder, press t, select Data may be damaged and operation may not work properly.
Page 379 Card may pop out. To remove miniSD Memory Card, press miniSD Memory Card lightly until a click is heard and then pull out. Excessive force may damage FOMA terminal or card. Store miniSD in included case after removing. Arrow...
Page 380 No, Picture call setting is not copied. Even if Image transfer is set to Yes, data with file restrictions (restrictions for output from the FOMA terminal) is not copied. Save destination for name, reading, phone number and mail address may change.
Page 381: Copying From Foma Terminal To Minisd Memory Card
Memory Card, destination folder can be selected. “xxx” in the folder name PUDxxx is a three-digit single- Copy up to 2 MB of PDF files between the FOMA byte number between 001 and 999, “xxx” in the folder terminal and miniSD Memory Card.
Page 382: Backing Up Foma Terminal Handset Data
It is recommended to set this function when sharing Read backup data from miniSD Memory Card. information with same models or with miniSD Memory When backing up data, keep or delete data in FOMA Card compatible FOMA terminals, or when terminal.
Page 383: Previewing Minisd Memory Card Data
To delete (repeatable) → i [Complete] procedures are the same as for phonebook.) selected → Yes → t. To copy to FOMA terminal handset, press C, Press 3 → enter terminal → main and press t. Select To delete all data...
Page 384: Copying From Minisd Memory Card To Foma Terminal
Format begins. copied. Read data (nP. 380) from miniSD When format is complete, Formatted appears. Memory Card. Copy up to 2 MB of PDF files between the FOMA Note terminal and miniSD Memory Card. Do not remove miniSD Memory Card during Copying phonebook entries operation.
Page 385 <USB Mode Setting> Press 1 [Delete one]. To delete selected data collectively: Press 2 ? Connect the FOMA terminal to a PC with the select name t (repeatable) ? i [Complete]. FOMA USB cable (sold separately) to read/write To delete all data: Press 3 ? enter terminal data to/from the miniSD Memory Card.
Page 386 Windows 2000/XP (Japanese version) Note Not all miniSD Memory Cards formatted by PCs or other devices can be used properly by the FOMA Do not remove miniSD Memory Card while terminal. Format the miniSD Memory Card on the updating. FOMA terminal.
Page 387: Managing Data
Saved data is deleted along with folder. PDF files cannot be displayed when saved in the Folders containing data saved as stand-by display, Import folder. Copy to FOMA terminal handset to ring tone and other functions cannot be deleted. display.
Page 388 Restriction (Expiration attachment and output from the FOMA terminal. − ○ − − date): If a File restriction is set on data shot with the FOMA MobileMP4/MP4 terminal, although sending the data as an attachment Restriction (Duration): − ○ −...
Page 389 Transfer for Repair indicates whether data in the from the FOMA terminal <File restriction> FOMA terminal can be transferred at a repair In stand-by, press t911 ? select counter that DoCoMo specifies. (DoCoMo shall not folder ? t ? select data ? C ? Edit data ? be liable for lost data, modified data, or data that t ? File restriction ? t.
Page 390 Press i [Complete], select Yes and press t. Handset miniSD Memory Card Note In stand-by, O or P appears when the FOMA terminal handset’s available memory is low or memory is full. Appears when available memory is less than 1.2 MB. (yellow)
Page 391: Using Ir Exchange
IrMC1.1. PDF in Data pre-registered in the FOMA During Ir exchange, the FOMA terminal status is the Data box terminal cannot be sent. PDF files same as when outside the service area. Therefore, up to 1.2 MB can be sent.
Page 392: Sending And Receiving Data Individually
Group numbers for all entries are set to Not specified. For terminal security code, enter current security code Receiving all phonebook entries (four to eight digits) set in the FOMA terminal. For Receive all, memory number, secret settings, Authentication password is a password exclusively for group names, group numbers, PushTalk numbers, Ir exchange.
Page 393: Sending And Receiving All Data Items
When sending all schedules, operate from Show all schedules or Calendar display. The FOMA terminal waits to receive data. Data is automatically received when data is sent within 30 seconds. Receiving All Data Items When receiving is completed, a confirmation <Receive All Ir Data>...
Page 394: Using Ir Exchange With I-Αppli Software
When i-αppli To is set to No, i-αppli will not activate from Ir exchange. Cannot be activated as i-αppli stand-by. In stand-by, press t922 The FOMA terminal waits to receive data. Refer to step 1 of “Receiving Single Data Item <Receive Ir Data>” on P. 391. Infrared port Software is activated when signal Actual operational methods will differ with each i-αppli...
Page 395: Using The Foma Terminal As A Voice Recorder
Voice Recorder call can be answered. After the call ends, the save Use the FOMA terminal as a voice recorder. confirmation screen appears. Play back recorded audio with Video player. In Voice recorder uses the movie shooting...
Page 396: Displaying Pdf Files
File list appears. terminal security code is required to display files. To view the next page, press r. To view the The current file location (FOMA terminal handset or previous page, press q. miniSD Memory Card) is saved even if PDF Viewer...
Page 397 Refer to P. 407 for Actual Displays PDF file at full details on AV output. size size. Save Saves PDF file on FOMA Sets PDF file to fit display terminal handset or miniSD width horizontally. Memory Card. Scroll bar...
Page 398 In the details screen (nP. 394), press Cr1 [Cut image] ? Yes ? t. C512 [My bookmark] ? select added bookmark ? C1 [Delete]. Save file to FOMA terminal handset > <Save Press 1 [Delete one]. In the details screen (nP. 394), press To delete selected bookmarks collectively: Cr2 [Save] ? select folder ? t.
Page 399: Managing Pdf Files
Cut document image to Stand-by: 240×320 and Del all (del fol) Deletes all folders. save on FOMA terminal handset as a still picture Only created folders can be deleted. (JPEG image). Saved files are deleted along with folder.
Page 400 Related Operations Related Operations Delete folders Edit title <Delete> <Edit title> In stand-by, press t935 ? select In stand-by, press t935 ? select folder ? C2 [Delete]. folder ? t ? select file ? C1 [Edit title]. Press 1 [Delete one folder] ? enter terminal Edit the title ? t.
Page 401: Document Viewer
(nP. 379) To view next page Before using this function, insert miniSD Memory Card Press m [Page ▲]. To view previous into FOMA terminal miniSD Memory Card slot in page advance. If PDF files are saved in \PRIVATE\SHARP\ Note DOCUMENT folder in the miniSD card using SH506iC,...
Page 402 Switch AV Displays document on TV screen using Related Operations output FOMA terminal and exclusive cable. Refer to P. 407 for details on AV output. Rotate view 90° left <Rotate view> Light Up Displays at maximum brightness. In the details screen (nP. 399), press C2.
Page 403: Managing Documents
Files are sorted with the oldest save date images may be included in the data. However, voices →new) first. cannot be used on the FOMA terminal. In some cases, images may not be shown either. Size (big Files are sorted with the largest files first.
Page 404 In stand-by, press t933 ? C3 [Switch folder] ? select folder ? t. Note (Related operations) Switching display folders Display folder with e-book of XMDF format that was used on non-FOMA terminals such as mobile information devices. Details screen Details screen (Horizontal)
Page 405 Display Font size Sets font size of e-book/ Related Operations settings e-dictionary to Large font, Default or Small font. Set font size <Font size> (Default setting: Default) In the details screen (nP. 402), press C 71 Text Sets the screen to display [Font size] ? select character size ? t.
Page 406: Using The Information In E-Book And E-Dictionary
Searching in dictionary Select Yes and press t. Operations for dictionary and e-book are the When Phone To (AV Phone To) is set, check same. Explanations below use the dictionary as the phone number and press i [V.phone] to an example. make a Videophone call.
Page 407: Scanning Text To Search For Words In An E-Dictionary
Related Operations While displaying e-dictionary, search English Create folders <New folder> words scanned with FOMA terminal. In stand-by, press t933 ? C11 [New folder] ? enter folder name ? t. Insert miniSD Memory Card containing an e-dictionary To delete New folder name: Press c for 1+ seconds.
Page 408: Printing Saved Images
Still pictures saved in above folders (DCF compliant JPEG) Move file to a new folder <Move> Still pictures on FOMA terminal handset cannot be In stand-by, press t933 ? select designated. folder ? t ? select e-book/e-dictionary ? C4 [Move].
Page 409 Viewer. Still pictures, movies and PDF files with file restrictions downloaded from sites and Internet web pages with the FOMA terminal as well as pre-installed data from Related Operations the Pre-install folder cannot be output. A message Sort still pictures <Sort>...
Page 410 FOMA terminal display. For AV output (nP. 407), adjust the volume of FOMA terminal display returns when playback the TV or other device connected to the FOMA ends. terminal. Additionally, verify that the volume of the TV is not too loud and turn off the TV or VCR Viewing Movies/i-motion on TV before disconnecting the FOMA terminal.
Page 411 Continuous play appears on the TV screen and The default setting is OFF. AV output. Screen display will disappear in 2 min appears on FOMA terminal display. FOMA terminal display returns when playback ends. Viewing i-appli on TV Viewing PDF and Document Files on...
Page 412 LMEMO9...
Page 413: Other Useful Functions
Other Useful Functions Checking Settings .........<Check Settings>412 Multiaccess.
Page 414 (receiving i-mode mail or data s or t [Call]. communications with a PC) simultaneously with the FOMA terminal. This is called Multiaccess. Number is dialed while connected to i-mode. Receiving SMS during communication (such as voice i-mode is disconnected when dialing call) is available besides Multiaccess.
Page 415 Multi Assistant (Multitask) Select an item when the function list appears and press t. Using Multi Assistant (Multitask) The screen for the selected function Multi Assistant (Multitask) is a function that appears on top. allows multiple functions to be used Refer to the corresponding page for simultaneously, such as composing of a...
Page 416 Desktop icons Active Marker Icon Function Retrieving the Last Used i-mode history Function or File Full Browser history Mobileaudio Easily retrieve functions, pages and images Show schedule that were recently used from stand-by. The Mail history current day’s schedule and ToDo list details My Picture history are also available.
Page 417 When Stand-by(still) is set and i-αppli, i-motion, Flash movie or animated GIF is set as the stand-by Automatically display, the default stand-by image appears. Turn FOMA terminal on automatically at a Setting Display calendar/date specified time. <Display calendar/date> Auto power ON settings are repeated daily until Change the calendar/date area.
Page 418 (i.e. not If Auto power ON and Auto power OFF are set for the same time, power turns on if FOMA terminal is off in stand-by: i-mode, Mail, and turns off if on. However, when power is on, power Alarm (ringing), Calculator, may turn on immediately after power turns off.
Page 419 The default setting is 着信音1 for Alarm tone, Volume 5 In stand-by, press t929 for Alarm volume, OFF for Snooze setting and 15 seconds for Ring duration. Alternatively, select . (Life tool) → Useful Message Show messages when alarm functions → Timer from Top menu. operates.
Page 420 Press i [Complete]. Related Operations Change alarm volume <Alarm volume> Setting details In the alarm setting screen (nP. 417), press 6 [Alarm volume]. Press o (louder) or p (softer) ? t. To not sound alarm: Select Silent. Set number of times and interval of alarm <Snooze setting>...
Page 421 In stand-by, press t927 Press a key to stop. and select a registration number to Press H. To clear display disable. Press t [Phone] → place To make a call (when contact is the call (nP. 119). saved) When snooze is set, alarm continues to ring in set intervals if a key other than H is pressed to stop alarm.
Page 422 Schedule Related Operations Managing Schedules Show calendar by entering date from stand-by In stand-by, enter date ? t1 [Schedule]. Manage schedules by saving start date and time, end date and time, details and contacts Note (Related operations) (phone number). Sound alarm before Entered dates and calendar shown correlate as follows.
Page 423 Select Smry, press t, enter Saving Schedules summary and press t. Basic saving methods for schedules including time and date, agenda, category and contact are Enter up to 40 single-byte (20 double-byte) characters. explained below. Select Ctgry, press t, select Always set start date/time and agenda.
Page 424 2 of “Saving Schedules” on P. 421). Note Setting alarms Ir exchange Send and receive schedules saved on FOMA In schedule saving screen terminal handsets using Ir exchange. (nP. 390) (nP. 421), select Alarm, press t miniSD Memory Card and 1 [ON].
Page 425 Setting as Secret Saving Vacation <Set Vacation> When schedules are set as Secret, they cannot Set certain days or certain days of the week as be seen unless terminal security code vacations. Set up to 100 vacations. Disable all set (nP.
Page 426 Select schedule and press t. Select method of setting holidays. If an image is saved, Press 1. To set (day)/(month) of press i [ViewPict] to every year preview. Press 2. To set 1 If contact is saved, (day) of (month) of phone number appears every year and call can be made.
Page 427 Contents of Schedule Editing Schedules <Edit> Received mail Sent mail In stand-by, press t928 Date Received date Sent date and and time time 1, select day, press t, select Summary − schedule and press C2 [Edit]. Category No category To select secret Alarm schedules, set Secret Image...
Page 428 Secret mode is set to ON. Still pictures on miniSD Memory Cards are not Set date and time in advance. (nP. 48) directly available. Copy to FOMA terminal handset Save up to 100 in ToDo lists. before saving. Save schedules between January 1, 2000 and December 31, 2099.
Page 429 Note Ir exchange Standard schedule Secret data Send and receive ToDo lists saved on FOMA Secret tasks are notified by alarm but phone numbers, terminal handsets using Ir exchange. (nP. 390) messages and images do not appear. (Appears when miniSD Memory Card Secret mode is set to ON (nP.
Page 430 Checking ToDo Lists Related Operations Specify status or category of ToDo lists or check Lock PIM for ToDo list <PIM lock> completed lists. In stand-by, press t9282 ? C ? r ? 1 [PIM lock] ? enter terminal security In stand-by, press t928 code (four to eight digits) ? t ? 1 [ON].
Page 431 Press 2 → enter terminal Running Shortcut Menu To delete all completed security code (four to eight digits) → t → Yes → t. tasks In stand-by, press p, select Press 3 → enter terminal To delete all shortcut icon and press t. tasks security code (four to eight digits) →...
Page 432 Action focus is applied to last image for animated GIFs. number) and three mail addresses. The default setting is Globe. Only the phone number of the inserted FOMA card appears by default. Add acquired i-mode mail address. In the Shortcut menu, press C3...
Page 433 Note Own image Alternatively, send owner information to other In stand-by, press t0 and t FOMA terminals with Ir exchange. (nP. 390) [Details]. Related Operations Terminal security code entry screen appears. Copy while creating i-mode mail or SMS Enter terminal security code (four...
Page 434 Recorded content may be altered or lost by misuse, when Remote lock all is operated. static, electronic noise, malfunction, repairs, Results are retained if memory is used. changing FOMA terminal or other handling. DoCoMo shall not be liable for any loss of content. Related Operations Calculator...
Page 435 Press 1 → enter PIN2 code To reset total Call charge is saved on the FOMA card. If a different (four to eight digits) → t → call cost FOMA card is inserted, the total call charges stored Yes →...
Page 436 Delete notice Ir exchange When Limit settings message is deleted, the Send and receive Text memos saved on FOMA message is not displayed until All calls cost is reset terminal handsets using Ir exchange. (nP. 390) or Limit settings is set again.
Page 437 Note miniSD Memory Card In text memo list (nP. 434), select Copy Text memos saved on the FOMA terminal memo and press C3 [Delete]. handset to miniSD Memory Cards (nP. 379) or view Text memos saved on miniSD Memory Cards.
Page 438 FOMA terminal to connect.) Earphone/Microphone auto calling is set. When a Videophone call is received while the FOMA terminal is closed, press switch to send Making Voice Calls with Switch image set in Substitute image (nP. 89). If the FOMA terminal is open, the camera image is Connect flat-plug earphone/ sent.
Page 439: Delete User Data
In stand-by, press t#, enter Terminal security code returns to default number 0000. terminal security code (four to eight Protected data in FOMA terminal is also deleted. digits) and press t. Other functions are not available while deleting. Alternatively, select _ (Settings) → General Alarms and receiving calls/mail are also not available settings →...
Page 440 User dictionary, BookReader bookmarks, folders*, chat mail, While deleting data collectively, the display may SMS (Short Messages), i-αppli mail become garbled, so do not close the FOMA data, mail templates, Record terminal. messages (including recorded voice When Delete user data is performed, i-Channel guidance), data read by Bar code ticker does not appear.
Page 441: Network Services
Network Services from the FOMA Terminal........
Page 442 Call Forwarding Service (nP. 444) is set to Caller ID Request Free P. 447 Activate. Service necessary Voice Mail Service cannot be set from FOMA Dual Network Service Necessary Fees P. 448 terminal when outside the service area. In such apply...
Page 443 Activating/Deactivating Voice Mail Setting Voice Mail Service Using Service Voice Guidance > <Activate/Deactivate VoiceMail> <Voice Mail Setting Set Voice Mail Service according to voice Activating Voice Mail Service guidance. Ringing time can be changed when first setting Voice mail. In stand-by, press t417 , select Yes and press t.
Page 444 Checking and Changing Voice Mail Note Service Settings <Status (Voice Mail)> If messages are still stored at Voice Mail center, even if E disappears, these messages are not Check Voice Mail Service settings and change deleted. E reappears when message is checked. activation, deactivation and ringing time settings.
Page 445 Checking settings Call Waiting Using Call Waiting In stand-by, press t423. Alternatively, select _ A series of beeps during a call notify you of (Settings) → NW another call. Place the current call on hold Services → Call waiting while answering the other call. →...
Page 446 STEP 3 Call is received. STEP 4 Call is automatically forwarded to the Forward voice/Videophone calls received on destination if not answered. FOMA terminal to a designated phone number (for landline phones, mobile phones or Activating/Deactivating Call Forwarding Videophones, etc.) while the handset is Service <Activate/Deactivate>...
Page 447 Call costs stemming from forwarding calls from the Call fees registered area to destination is charged to the subscriber. Charges may increase if forwarding destination is set and FOMA terminal is left turned Caller off. Even if Call Forwarding Service is set to Activate, Videophone calls are only forwarded to 3G-324M (nP.
Page 448 Using Voice Mail Service when Registering selected numbers for Forwarding Destination is Busy Nuisance Call Barring Service <Forwarding No. Busy> <Register Selected No> Subscription for Voice Mail Service (monthly fees In stand-by, press t442. apply) is required. Alternatively, select _ (Settings) → NW In stand-by, press t434, Services →...
Page 449 Caller ID Request Service settings are only available from handset with contracted FOMA card Notify Caller ID Service inserted. Remote operation is not available. Sending Handset Number Transmission/Calling charges are not incurred when activating/deactivating.
Page 450 ※ Certain services are restricted. Checking Settings <Status Request> ※ FOMA and mova cannot be used simultaneously. In stand-by, press t463. Switching to FOMA Network Alternatively, select _ (Settings) → NW Switch handset to FOMA network.
Page 451 Japanese guidance.* If contact numbers for General inquiries or Repair The default setting is Japanese. inquiries are not stored on the FOMA card, this English only guidance cannot be set for incoming function is not available. calls. The displayed screen or number to dial may vary * If between DoCoMo mobile phones, outgoing depending on the FOMA card.
Page 452 DoCoMo mobile phones. Press 1. Remote control is also available from outside Voice Mail Press 2. Call forwarding the FOMA service area. Press 3. To perform remote operations, set Remote Call Rejection Press 4. control to Activate in advance.
Page 453 Set Voice Mail Service and Call Forwarding Enter name and press t. Service remotely from landline phones, NTT Enter up to 14 digits. payphones, DoCoMo mobile phones using FOMA terminal phone number and four-digit network Enter phone number and press t. security code.
Page 454: Services (Ussd)
New name is added or changed. When there is a service code, it is saved as a USSD Press C1 → enter receive To edit Receive on the FOMA terminal. display name → t → enter display special number or service code Saving Services →...
Page 455: Data Communication
Connecting the FOMA Terminal to Your PC ........
Page 456: Data Communication
FOMA packet transmission. “mopera”, or a synchronous ISDN 64K access point. For 64K data communications, host must support Connect the FOMA terminal to a device such as a FOMA 64K data communications or synchronous PC and perform appropriate settings to use 64K ISDN 64K communications.
Page 457: General Flow To Prepare For Data Communication
(Context Identifier) as shown below. Registration number assigned when an APN Connect the FOMA terminal to your PC (nP. 456) is registered to the FOMA terminal. On the FOMA terminal, numbers 1 to 10 can be used. DNS (Domain Name System) Install the communication setting file (nP.
Page 458: Connecting The Foma Terminal To Your Pc
Windows 2000 Professional, Windows XP (all Japanese versions) Note (not compatible with Windows 98) If installation fails and FOMA SH902i is not listed in Required Windows 98 SE, Windows Me, the screens of step 3 on P. 460, uninstall the...
Page 459: Installing The Communication Setting File
(Advanced)) and click 次へ (Next). ② Release button ① Release button T Pull the FOMA USB cable out from the PC. Search location screen appears. Note Specify the search location. Connecting the FOMA terminal while charging in the desktop holder is also possible.
Page 460 CD-ROM is inserted into the PC depending on your settings. Continue to install other drivers. Repeat steps 3 to 7, and install the following Connect the FOMA terminal to your drivers in order. PC and click 次へ (Next). ① Modem driver ② OBEX port driver ③...
Page 461 イバを検索する（推奨） (Find the best Communication Setting File (Driver) driver for the devices in use If the FOMA terminal is not properly recognized by (Recommended)) and click 次へ (Next). the PC, set up and communications are not possible. Example: Confirming Windows XP drivers.
Page 462 ポート (COMとLPT) (Ports (COM Related Operations & LPT)) or ポート (COM/LPT) (Ports (COM/LPT)), If installation fails or FOMA SH902i does not ユニバーサルシリアルバスコントローラ (Universal Serial Bus controllers) or USB (Universal Serial appear in the screen of step 3 Bus) コントローラ...
Page 463: Communication Settings With The Foma Pc Setup Software
Setup Software to easily make the following settings. (nP. 465) Easy settings 64K data communications using mopera U Follow the menu to easily create dial-up settings for FOMA or mopera (nP. 466) data transmissions and configure the W-TCP setting. 64K data communications using other W-TCP settings providers (nP.
Page 464 Note Read the licensing agreement and click はい (Yes) to agree. When the FOMA terminal is recognized as a number larger than COM20, host (APN) information cannot be acquired or read in the Host (APN) Setting. In such cases, use Hyper Terminal and set the host (APN).
Page 465 To uninstall FirstPass PC Software uninstalling the FOMA PC Setup Software. Select FirstPass PC ソフト (FirstPass PC To uninstall the FOMA PC Setup or FirstPass PC Software) and click 変更と削除 (Change/Remove). Software on a PC running Windows XP or 2000...
Page 466 次へ (Next). Use this setup software to easily create a dial-up setting for FOMA data communications. Check that the FOMA terminal is correctly connected to the PC before making any settings. (nP. 456) Start the program. Select mopera U への接続 (mopera U connection) or mopera への接続...
Page 467 W-TCP setting has already The Add host (APN) screen appears. been optimized. T Properly enter the FOMA packet transmission supported host name (APN) Confirm the setting information and for the provider in the 接続先 (APN) (Host (APN)) field, and click OK.
Page 468 The following single-byte characters cannot be entered. ¥ / : ＊ ? ! < > | Make sure that FOMA SH902i is set in モデムの選択 (Selected modem). Click 次へ (Next). User name and password are not required for The W-TCP setting required for packet mopera U or mopera.
Page 469 To change the settings, click 戻る (Back). following settings when creating a dial-up setting. Click OK on the 完了 (Finish) Connection name: screen. Enter a connection name. Selected modem: FOMA SH902i Phone Number: Enter the phone number provided by the provider.
Page 470 (Dial-up networks). Follow the instructions on the screen to restart A screen appears on the FOMA terminal showing the PC. After the PC is restarted, optimization the calling for packet transmission or dialing for of the system setting is enabled.
Page 471 (APN) information is read. (This operation is not performed if the FOMA terminal is not connected.) The setting information can also be read by selecting from the toolbar ファイル...
Page 472: Communication Settings Without The Foma Pc Setup Software
Start up communication software that supports AT To load saved host (APN) settings in order to re- commands (steps 2 to 5) edit them or write them onto the FOMA terminal, select the appropriate function from the ファイル (File) menu on the toolbar.
Page 473 The advanced settings screen for phone When confirming APN settings using AT number appears. commands AT+CGDCONT?o Select FOMA SH902i from Refer to P. 483 for details on AT commands. 接続方法 (Connection method), enter a temporary number in 電話番号 (Phone number) field that does not actually exist (such as 0), and click OK.
Page 474 Setting the Dial-up Network Set either Send caller ID (186) or Not send caller ID (184) during Set the host and TCP/IP protocol. Contact the packet transmission. Internet service provider or network administrator for more information on settings. Hosts For packet transmissions, set the host (APN) in advance.
Page 475 When 新しい接続ウィザードの完了 (New connection wizard completed) Select モデム− FOMA SH902i (COMx) appears, click 完了 (Finish). (Modem - FOMA SH902i (COMx)) and The newly created connection wizard appears. click 次へ (Next). A number will replace “x”. Confirm the setting information and The connection name screen appears.
Page 476 Click スタート (Start) menu → プログラム (Programs) → アクセサリ When two or more modems are connected to (Accessories) → 通信 the PC, make sure that FOMA SH902i in 接続 (Communications) → ネットワークとの方法 (Connect using) shows E. When H ダイヤルアップ接続 (Network and appears instead, change to E.
Page 477 Confirm that FOMA SH902i is set in Click OK. インターネットへの接続に使うモデム Internet account connection screen reappears. を選択する (Select modem to use to Click 次へ (Next). connect to the Internet) and click 次 The Internet account login information screen へ (Next). appears.
Page 478 For the second and subsequent times, this screen will not appear. Proceed to step 3. When two or more modems are connected to the PC, make sure that FOMA SH902i in 接続 Click 次へ (Next). の方法 (Connect using) shows E. When H The dial-up network screen appears.
Page 479 Example: Using <cid>=1 to connect to mopera, the H. When E appears instead, change to H. DoCoMo Internet Connection Service. Make sure that FOMA SH902i is set in the 接続方法 (Connection method) field. Set to FOMA Click スタート (Start) menu → プロ...
Page 480 名 (Connection name) field and click 次へ (Next). A screen for specifying the host phone number appears. Make sure that FOMA SH902i is set in モデムの選択 (Selected modem). Set to FOMA Confirm that 市外局番とダイヤルのプロパティを SH902i if not set. 使う (Use area code and dial-up properties) shows H.
Page 481: Sending And Receiving Data (Obex)
(nP. 522) Use the following three types of data communication with the FOMA terminal. Send data one item at a time, from a PC to a FOMA terminal (Write 1). Send data in bulk, from a PC to a FOMA terminal (Write all).
Page 482 Sending Single Data Item (Write 1) Schedule, and protected mail data saved as secret data. Send data from a PC to a FOMA terminal one item at a If an error occurs during data transmission from a time. PC to the FOMA terminal, all data stored in the Sending one item at a time from a FOMA terminal to a FOMA terminal may be deleted.
Page 483: At Command List
Offline mode The FOMA terminal is in stand-by. Normally, this AT Command List mode is used to operate the FOMA terminal using AT commands. Online data mode AT Commands The FOMA terminal is connected and performing data communication. When an AT command is entered in...
Page 484 AT Command List [M]: AT commands that can be used with the FOMA SH902i Modem Port. Execution AT Command Overview Parameter/Explanation Example AT%V Displays FOMA terminal AT%Vo version. Ver1.00 ― AT&C<n> Sets operating condition for circuit n=0 : Circuit CD always ON AT&C1o...
Page 485 When 186 (send caller ID)/184 (not send caller ID) are set by this command and in the dial-up network settings, refer to the table on P. 472. Switches the FOMA terminal (During mode from online data mode to communication) online command mode.
Page 486 3: CLIR temporary mode (default setting is “Do not send”) 4: CLIR temporary mode (default setting is “Send”) AT+CMEE=<n> Sets the manner to display FOMA Sets whether to display errors only as AT+CMEE=0o terminal error reports. “ERROR”, or to display reason with text or numerical value.
Page 487 Ver1.00 ― AT+IFC=<n,m> Sets local flow control format DCE by DTE (<n>) AT+IFC=2,2o between the PC and FOMA 0: No flow control terminal. 1: XON/XOFF flow control 2: RS/CS (RTS/CTS) flow control (default setting) DTE by DCE (<m>) 0: No flow control...
Page 488 Busy tone detection, dial tone detection, speed display (default setting) ATZ<n> Resets the FOMA terminal’s AT Resets the FOMA terminal’s AT command (When online) *2, *4 command settings. settings to the values set in non-volatile ATZo memory.
Page 489 ATS7=60o (seconds). When establishing 64K data communications or packet transmission, if the FOMA terminal cannot send “CONNECT” signal to the PC within the set number of seconds after receiving ATD input from the PC, it returns a “NO CARRIER” result, and proceeds to disconnect.
Page 490 Dialed number is making a call. FOMA terminal. It can be set between 1 and 10 in Dialed number refused incoming call. the FOMA. The default settings are mopera.ne.jp for <cid>=1 and mopera.net for <cid>=3.
Page 491 This setting is assigned to each cid by default used for packet transmission, registered in the value. FOMA terminal. It can be set between 1 and 10 in <cid> : 1 to 10 the FOMA terminal. The default settings are <cid>...
Page 492 RS-232C. However, since the FOMA terminal is downlink speed of connected to the PC via FOMA USB cable, the 384 kbps.) displayed speed will differ from the actual speed of Numerical display example: ATD connection.
Page 493: Text Input
Text Input Entering Text ..........<Text Input>492 5-touch Input Method Text Entry .
Page 494 Text Input In text input screen, press the dial keys and enter hiragana. Entering Text Every time the key is Enter text for various functions on the FOMA pressed, the character changes. terminal, such as phonebook and mail. Kanji candidates appear...
Page 495 Note Related Operations Kanji candidate display order varies depending on Undo entry <Undo> the dictionary memory function. Enter text ? operation (delete, cut) ? s. There are 6,355 kanji available from JIS level-1/ Change font size <Font size> level-2 kanji sets. In text input screen, press C ? Chara entry/ Complex kanji are changed in part or are excluded.
Page 496 Words shown are already registered. Editing Text Words shown are grouped into the following times: 5:00 to 10:59, 11:00 to 16:59, 17:00 to 22:59, and Adding characters 23:00 to 4:59. 1-touch single-character memory Move cursor to location to add If the first character for a character string characters and input text.
Page 497 Changing characters Entering alphabet Press a [Chara] multiple times and Delete and re-enter characters. X or d appears. Example: When changing ごろ to 近く Enter double-byte alphanumerics when X is showing and single-byte alphanumerics when twice d is showing. Press m to switch between upper case and lower case.
Page 498 Inputting mail address easily Related Operations Mail addresses use single-byte characters. Convert hiragana to alphabet/numbers In text input screen, press a for 1+ <Kana/English> seconds, select phrase and press t. Enter hiragana ? C [KanaAB12] ? alphabet/ number ? t. Note Note (Related operations) The most recently used phrases appear first in the...
Page 499 Enter phrase and press t. Note Convert keywords (reading) to pictographs. Refer to “Pictograph List” on P. 510. Resetting to default phrases <Reset> The ten pictographs used most recently appear on Reset phrases to their default settings. the first line. The following reset commands are available.
Page 500 Kuten Code Input Move the cursor to the last character and press t. Inputting Kuten Code Selected text to copy is highlighted. Use four-digit kuten codes to enter kanji, hiragana, (The highlighted text is copied or cut.) katakana, symbol, and alphanumeric characters. Press r for 1+ seconds to select all Each kuten code corresponds to a specific character.
Page 501 Refer to P. 235 for details on downloading dictionaries. The default setting has no dictionaries registered. Note If a different FOMA card from when the dictionary Setting/Clearing a Dictionary was downloaded is inserted, a FOMA card restriction mark appears next to the dictionary. In In stand-by, press t322.
Page 502 Replacing User Dictionary with Including Emoticons as Conversion Download Dictionary Candidates <With Emoticons> <Download Dictionary> Set whether to include emoticons in conversion Replace the User dictionary with Download candidates list. dictionary. The default setting is ON. In text input screen, press C, select In stand-by, press t321 Chara entry/dict, press t and and C2 [Dwld dictionary].
Page 503: Appendix/Using With External Devices/Troubleshooting
Multi Assistant (Multitask) Combinations ........519 Services Available from the FOMA Terminal ......<Service>520 Options and Accessories .
Page 504: Menu List
Menu List Settings Menu Sound Function menu Key operation Default setting Page Phone ring tone, V.phone ring tone, t111 phone ring vol Payphone ring tone, User unset, P. 128 Not support: Volume 5☆ Mail ring tone, MessageR ring tone, t112 Mail ring vol MessageF ring tone, SMS ring tone: P.
Page 505 Function menu Key operation Default setting Page Picture call set: ON/Outgoing calls: 電話発信1/Incoming voice calls, t241 Call/Rcv display Incoming Videophone, Payphone, P. 139 User unset, Not support: 電話着信1 ☆ Send display: メール送信1/Receive t242 Send/Rcv display P. 139 XPersonalize display: メール受信1☆ Up: メニュー枠1(上)/ t243 Submenu image...
Page 506 NW services Function menu Key operation Default setting Page t411 Check messages − P. 441 t412 Play messages − P. 441 t413 Activate VoiceMail Ring time: 10 seconds P. 441 t414 Set ring time Ring time: 10 seconds P. 441 t415 UVoice Mail Deactivate VoiceMail...
Page 507 Phone settings Function menu Key operation Default setting Page t611 Noise reduction P. 61 ON☆ t612 UIn-call settings Reconnect Alarm on(high) ☆ P. 61 t613 Quality alarm Alarm on(high) ☆ P. 132 VEar/mic auto calling P. 435 OFF☆ t631 Any key answer P.
Page 508 Function menu Key operation Default setting Page [Change security code 0000 P. 153 \Face authentication P. 154 OFF☆ t791 Delete user data − P. 437 ]Delete all data t792 − Del secret data P. 438 When settings are reset (nP. 437), functions return to default settings (marked with a ☆). Other settings Function menu Key operation...
Page 509: Dial Key Assignments (5-Touch)
Dial Key Assignments (5-touch) Use dial keys to enter text. Each key has multiple characters assigned to it. Press the key multiple times to switch characters. Example: If 1 is pressed three times in double-byte katakana mode, 1 [ア] O1 [イ] O1 [ウ] appears. (Press s to scroll backwards through characters.) Double-byte Characters Press after confirming a character to enter a line break (K).
Page 510 Single-byte Characters A line break (K) is entered. K appears as a single-byte character but is counted as a double-byte character. Edit/delete new line mark like any other character. Available when inputting text for messages, Schedule, ToDo list and Text memo. When characters are before/after the cursor or when characters are only after the cursor, all characters at and after the cursor are deleted.
Page 511: Dial Key Assignments (2-Touch)
Dial Key Assignments (2-touch) Double-byte Single-byte Upper case mode Upper case mode * Press 80 to switch between upper case mode and lower case mode. For , characters can be entered in lower case or upper case, depending on the mode switched to. In double-byte lower case mode, press 04 to enter “、”...
Page 512 Pictograph List Enter reading to convert to pictographs. Pictograph 1 The pictographs above may not appear properly depending on the receiving model. In addition, pictographs may not appear properly on PCs and mobile phones not supporting i-mode. Pictographs other than e, d and f appear as spaces in SMS. When keyword (reading) is entered, 絵1 (Pict-1) appears after the conversion candidate.
Page 513: Phrase List
The pictographs above may not appear properly depending on the receiving model. In addition, pictographs may not appear properly on PCs and mobile phones not supporting i-mode. Some of the above pictographs may not appear properly depending on the site. When keyword (reading) is entered, 絵2 (Pict-2) appears after the conversion candidate.
Page 514: Pre-Installed Data List
Pre-installed Data List Stand-by display 待受画面１待受画面２待受画面３待受画面４待受画面５待受画面６ ∗ 待受画面７待受画面８* 待受画面９* 待受画面10* BVIG Pre-installed frames フレーム１フレーム２フレーム３フレーム４フレーム５フレーム６フレーム７フレーム８フレーム９ * Each frame is available in QCIF, QVGA, CIF and VGA sizes. Deco-mail templates あいさつ...
Page 515 Deco-mail pictures やあ！（上）やあ！（下） Chidori（上） Chidori（下） Good afternoon（上） Good afternoon（下） Room1（上） Room1（下） Room2（上） Room2（下） Happy?（上） Happy?（下） Dragon（上） Dragon（下） Nature（上）あそぼ（上）あそぼ（下） Nature（下） Free way（上） Free way（下）和（上）和（下）元気？（上）元気？（下）夜空（上）夜空（下）おめでとう（上）おめでとう（下） Happy！（上） Happy！（下）おこるなく超ハッピー悩むショック...
Page 516: Jis Kuten Code List
JIS Kuten Code List Use four-digit kuten codes to enter kanji, hiragana, katakana, symbol, and alphanumeric characters. Each kuten code corresponds to a particular character. Refer to “Inputting Kuten Code” on P. 498 for details. Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3...
Page 517 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 肩見謙賢軒遣鍵険顕験醸...
Page 518 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 ほ枠...
Page 519 Kuten 4th digit Kuten 4th digit Kuten 4th digit Kuten Kuten Kuten 1 to 3 1 to 3 1 to 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 浚浹浙涎涕濤涅淹渕渊縡...
Page 520: Using The Calculator
Using the Calculator Example of various calculations M appears when a value other than 0 is in memory. Note Press m [CM] to clear the memory before starting. When E appears When E appears as a result, no further calculations can be made. Press c [C•CE]. ①When dividing by 0 (Example: 5 [÷] 0 [=]) ②When the number of integers in the memory exceeds 12 digits (Example: [CM] 999999999999 [M+] 1 [M+]) ③When the number of integers in a calculation is 12 digits or more (Example: 1000000000 [÷] 0.01 [%])
Page 521: Multi Assistant (Multitask) Combinations
Data Transmission Video i-mode PushTalk Data type Voice call trans. PushTalk phone mail Plus i-mode trans. (packet) Current (64K) Make Receive Make Receive Send Receive Send Receive Send Receive Send Receive Network connection transmission i-αppli ○ ○ × × × ○...
Page 522 Services such as 116 (NTT sales counter), Dial Q2, message service and credit card calls are not available. (Automatic credit card calls to a FOMA terminal can be made from a landline telephone or payphone.) ＊ miniSD Memory Cards are sold separately. (nP. 376)
Page 523: Options And Accessories
For details on compatible devices, refer to http://k-tai.sharp.co.jp/products/d/sh902i/. Or, contact the number below. Play i-motion created on external devices (including audio data) on the FOMA terminal. (nP. 522) * Some movies cannot be played back depending on the file format or the type of external device.
Page 524: Data Link Software
To download, a PC connected to the Internet is required. Additional transmission fees are charged for downloading. The FOMA USB cable (sold separately) is required to connect to a PC and to use Data Link Software. Ir exchange is not available.
Page 525: Sd-Audio Player Sd-Jukebox
Memory Card, allowing enjoyment on the FOMA SH902i. Connect the FOMA SH902i to a PC with a FOMA USB cable (sold separately) and write recorded songs to miniSD Memory Card. (nP. 383)
Page 526: Playing Back Songs
SD Memory Card readers/writers can also be used. However, the reader/writer must support copyright protection function. Refer to “Playing i-motion (Including Audio Data) Created with PC on the FOMA Terminal” on P. 522 for details on saving to the Music/Voice folder in i-motion.
Page 527 Memory Card. Playback resumes from the ending point the next time the song is played (not available for Music/Voice). However, if songs on the miniSD Memory Card are deleted or added with the FOMA terminal or PC, the history information is cleared and may be used for different files. Related Operations When FOMA terminal is closed Press x (for 1+ seconds) when in stand-by ? (Play Mobileaudio) ? <...
Page 528 In viewer position or when FOMA In normal position terminal is closed Press q. Press + for 1+ seconds. To play previous song/To return to If playback time is less than two seconds, the previous If playback time is less than two beginning of song song is played.
Page 529 Related Operations Note Edit title (double-byte) and artist’s name (double-byte). Character limit for all items is 125 characters. Title (single-byte) and artist’s name (single-byte) cannot be viewed on the FOMA terminal. Using Playlist <Playlist> Use a saved playlist to play back.
Page 530: Troubleshooting
P. 40 Is the charger terminal dirty? − Clean terminal with a cotton swab. Is the AC adapter connector properly connected to the FOMA terminal P. 43 and Desktop holder? P. 44 Is the FOMA terminal properly set in the Desktop holder? P.
Page 531 Service not registered Subscription is required to use i-mode. − appears If contract is made for i-mode after purchase, turn off FOMA terminal − power and restart. Ring tone does not sound Is the phone ring volume set to Silent? P.
Page 532: List Of Error Messages
P. 157 Enter correct PUK when prompt appears to disable PIN lock. PUK is blocked Appears when power is turned on or a FOMA card operation is used P. 157 while PUK is blocked. Contact a DoCoMo Shop or retailer.
Page 533 SMS is full Unable to copy Appears when the maximum number of SMS are saved in the FOMA P. 317 anymore terminal handset or the FOMA card and no further messages could be copied.
Page 534 Service not registered i-mode is not subscribed to. Subscription is required to use i-mode. P. 210 If contract is made for i-mode after purchase, turn off FOMA terminal − power and restart. SSL Session cannot be Appears when the attempt to connect to a site or Internet web page P.
Page 535 File with restrictions for i-mode mail attachment or output from the P. 275 deleted FOMA terminal is attached to i-mode mail to be forwarded or replied to with Reply with quote. Press t [OK] and the i-mode mail without the attachment appears on the i-mode mail editing screen.
Page 536 − This software is not Appears when attempting to download an i-αppli not supported by the supported by this phone FOMA terminal. The software cannot be downloaded. Canceled download Appears when downloading is canceled. P. 233 P. 321 Download failed Appears when there is no data to download, or the data is invalid.
Page 537 Appears when there are files or folders on the miniSD Memory Card P. 378 data that were created on a PC or a handset other than the FOMA SH902i. Link set for data in folder. Appears when folders exist in folders such as xxxSHARP/xxxSH_UF/ −...
Page 538: Warranty And After-Sales Services
Information registered in your FOMA terminal, such as phonebook entries, may be lost or damaged if your FOMA terminal is damaged, repaired, or mishandled. It is recommended that a memo be kept of all data stored in the FOMA. If you own a PC (Windows 98 Second Edition, Windows Me, Windows 2000 Professional, Windows XP Home Edition, Windows XP Professional), you can transfer and store registered information such as phonebook entries using the exclusive Data Link Software (nP.
Page 539 The FOMA terminal will be repaired in accordance with the terms of the warranty. When bringing the FOMA terminal in for repairs, be sure to bring the warranty card. Even during the warranty period, a fee will be charged for repairs of malfunctions or damage caused by improper handling by the customer, or when no warranty certificate is presented.
Page 540: Updating Software
If this occurs, please re-enter the information or re-specify the settings. If your FOMA terminal gets wet or has been in a humid location, turn off the power, take out the battery immediately, and bring it to a repair counter that DoCoMo specifies as soon as possible.
Page 541 Starting Software Update In stand-by, press t38. Alternatively, select _ (Settings) → Initial settings → set date and time → register terminal security code (four to eight digits) → set Keypad sound → set PushTalk caller ID → Yes from Top menu to update software. (nP. 47) Enter terminal security code (four to eight digits) and press t.
Page 542 Select OK and press t. When updating software, information about handset (model and serial number) is sent to the server (DoCoMo software update server). Sent information is only used for software update. When updating is not necessary, No update is needed. Please continue to use as before appears. Press t and resume operations.
Page 543 After approx. five seconds, power automatically turns off then on. *1 Keys will not respond. Update cannot be canceled. *2 After Checking if update is fully complete appears, next screen appears immediately. A screen asking to end or not appears if H is pressed. If download is aborted, data downloaded up to that point is deleted.
Page 544 When the FOMA terminal is turned off at the reserved date and time for software update or when the FOMA terminal is turned off right after the update starts, the update will be canceled.
Page 545 If a call is in progress at the set date and time for software update, software update starts when returning to stand-by within ten minutes. Software is not updated if ten minutes pass before returning to stand-by. If Delete all data (Delete user data) (nP. 437) is performed after reservation is completed, the reservation is canceled.
Page 546: Protecting Your Foma Terminal From Harmful Files
If the pattern definition corresponding to a particular harmful file is not downloaded or saved, the scan function will not be able to protect the FOMA terminal. Pattern definitions vary depending on the phone model. Therefore, DoCoMo may discontinue offering pattern definitions for a particular model three years after the release date.
Page 547 When auto-update is successful, a message stating so appears. Auto-update is not performed depending on the status of the FOMA terminal. In such cases, a message stating that pattern definitions have been updated appears. In stand-by, press t372, select Enable and press t.
Page 548 Scanned results display Level 0 Level 1 Level 2 Level 3 Level 4 Displaying, Cancel operation? Displaying, Displaying, activating, Displaying, appears when t activating, and activating, and and calling are not activating, and calling are available. [Agree] is pressed. calling are not available.
Page 549: Main Specifications
The above mentioned call duration and stand-by time are shortened with the use of data communications, multiaccess, and the camera. Continuous stand-by time is the average usage time when the FOMA terminal is folded and in a status where signals are received.
Page 550 ECONOMY NORMAL SUPER FINE 1.2M: 960×1280 300 shots 150 shots 90 shots UXGA: 1200×1600 150 shots 90 shots 55 shots 3M: 1536×2048 90 shots 55 shots 35 shots Estimated number of images that can be shot (16 MB) ECONOMY NORMAL SUPER FINE Icon: 76×76 ー...
Page 551: Specific Absorption Rate (Sar)
Up to approximately five hours when using 32 MB. (Approximately 2 hours and 20 minutes when using 16 MB) Specific Absorption Rate (SAR) This model phone FOMA SH902i meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
Page 552 LMEMO9...
Page 553: Index/Quick Manual
Index/Quick Manual Index..............552 Quick Manual .
Page 554 Index Antenna . . . . . . . . . . . . . . . . . . 24 Symbols Any key answer. . . . . . . . . . . 64 b31#/#31# . . . . . . . . . . . . . . . 56 CA Certificate . . . . . . . . . . . 248 Arrival call action . . . . . . . . 449 Cache . . . . . . . . . . . . . . . . . . 221 ASF file . . . . . . . . . . . . . . . . . 363 Numerics Calculator . . . . . . . . . . . . . . 432 Auto power OFF . . . . . . . . . 416 Calculation example Auto power ON . . . . . . . . . . 415 186/184 . . . . . . . . . . . . . . . . . . 56 . . . . . . . . . . . . . . . . . . ...
Page 555 Picture light color . . . . . 198 Redial . . . . . . . . . . . . . . . . . 56 Chat mail Auto start . . . . . . . . . . . . . 311 Register words . . . . . . . 499 Save camera settings . . . . . . . . . . . . . . . . . . . 201 Create/Send . . . . . 306, 307 Schedule . . . . . . . . . . . . 426 Select size . . . . . . . . . . . 191 Delete . . . . . . . . . . . . . . . . 310 Screen memo . . . . . . . . 231 Send message . . . . . . . . 202 Delete member . . . . . . . 310 Shortcut menu . . . . . . . ...
Page 556 Voice call . . . . . . . . . . . . . . 53 Voice call . . . . . . . . . . . . . . 66 Focus lock . . . . . . . . . . . . . . 198 Hold tone . . . . . . . . . . . . . . . . . 68 Edit image . . . . . . . . . . . . . . 358 FOMA card Change face position FOMA card (UIM) settings . . . . . . . . . . . . . . . . . . . 361 . . . . . . . . . . . . . . . . . . . 156 Character stamp . . . . . . 362 PIN code/PIN2 code . . . 153 i-αppli Correct image . . . . . . . . 360 Auto start . . . . . . . . . . . . ...
Page 557 Streaming type . . . . . . . 256 Broadcast . . . . . . . . . . . . 266 Memory number . . . . . . . . 109 Web To function . . . . . . 255 Check address . . . . . . . . 296 Menu list . . . . . . . . . . . . . . . 502 Check mail settings . . . 305 i-motion mail . . . . . . . 261, 367 Data Box . . . . . . . . . . . . 506 Check new messages Receive/Play . . . . . . . . . 284 Life tool . . . . . . . . . . . . . . ...
Page 558 Paste . . . . . . . . . . . . . . . . . . . 498 Copy from FOMA card . . . . . . . . . . . . . . . . . . 115 Pause Dial . . . . . . . . . . . . . . . 57 Copy to FOMA card Network connection . . . . . . 102 PDF Viewer . . . . . . . . . . . . . . . . . . 114 Network security code . . . 153 Add bookmark . . . . . . . . 396 Delete . . . . . . . . . . . . . . . 123 Add mark . . . . . . . . . . . . . 396 Network service Dialing speed . . . . . . . . 121 Cut image . . . . . . . . . . . . 396...
Page 559 New group . . . . . . . . . . . 100 Record voice . . . . . . . . . . . . 393 Save from text memo Phonebook . . . . . . . . . . . . 99 . . . . . . . . . . . . . . . . . . 425 Redial . . . . . . . . . . . . . . . . . . . . 55 Secret data . . . . . . . . . . 423 PushTalk arrival actions Delete . . . . . . . . . . . . . . . . . 56 . . . . . . . . . . . . . . . . . . . 102 Show all schedules . . . 424 Save to phonebook Show by category . . . . 424 PushTalk ring time setting (handset) . . . . . . . . . . 115 . . . . . . . . . . . . . . . . . . .
Page 560 SMS . . . . . . . . . . . . . . . . . 311 SMS . . . . . . . . . . . . . . . . . . . . 262 Text input . . . . . . . . . . . . . . 492 Still picture . . . . . . . . . . . 357 Compose/Send . . . . . . . 311 1-character conversion Copy to FOMA terminal Send/Receive display . . . . 139 . . . . . . . . . . . . . . . . . . 493 handset . . . . . . . . . . . . 318 Sent messages . . . . . . . . . . 297 1-touch conversion . . . 493 Copy to UIM . . . . . . . . . . 317 Send mail . . . . . . . . . . . .
Page 561 Theme . . . . . . . . . . . . . . . . . . 145 Continuous play . . . . . . . 366 Viewing angle Frame rate . . . . . . . . . . . . 364 Linked manner mode Theme color . . . . . . . . . . . . . 145 Light up . . . . . . . . . . . . . . 364 . . . . . . . . . . . . . . . . . . 149 Time . . . . . . . . . . . . . . . . . . . . . 48 Repeat playback . . . . . . 364 Pattern setting . . . . . . . 150 Timer . . . . . . . . . . . . . . . . . . . 416 Resume settings . . . . . . 364 Viewing angle . . . . . . . . 149 Set volume . . . . . . . . . . . 364 Title and status color . . . . .
Page 562 Quick Manual Remove the Quick Manual by cutting along the perforated marks starting on the next page. Folding the Quick Manual (Completed) Warning Be careful of injuries when cutting out Quick Manual. This manual is produced of recyclable material. Please recycle when no longer needed.
Page 563 Refer to 全国サービスステーション一覧 (Service settings In text input screen, press i [Pict/Sym]. Phone Three entries. For FOMA Station List) provided with the FOMA terminal for details. number card, one entry. Cannot be saved to FOMA card. Switch between modes. Press p ? の ? t.
Page 564 Displaying PDF files Sending Deco-mail Auto Receive Sound In stand-by, press t935 ? folder ? t In message entry screen, press C1. i-mode mail is Function menu Function number ? PDF file ? t. Select decoration ? i [Input] ? enter text. automatically Select phone ring vol...
Page 565 Other NW services Phone settings Security Other settings Function menu Function number Function menu Function number Function menu Function number Function menu Function number In-call Noise reduction Remote Activate Secret mode Initial settings settings Reconnect control Deactivate PIN code input set Own number Quality alarm Settings...
Page 566 Self mode enabled ※ Refer to P. 29 to P. 31 of Manual for detailed Refer to 全国サービスステーション一覧 (Service PushTalk in progress explanations on displayed icons. Station List) provided with the FOMA terminal for details. -28- -29- -30- -31- <Cut here>...
Page 567 Turn off Your FOMA Terminal in the Following Places ■When in an area where use is prohibited There are places where the use of mobile phones is prohibited. Be sure to turn off your FOMA terminal in the following places.
Page 568 Confirm phone number before calling. Confirm phone number before calling. For details, refer to “ 全国サービスステーション一覧 ” (Service Station List) provided with the FOMA terminal. Don’t forget your mobile phone … or your manners! When using your mobile phone in public, don’t forget to show common courtesy and consideration for others around you.

Foma PushTalk SH902i Manual

Quick Links

Troubleshooting

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Foma PushTalk SH902i

Summary of Contents for Foma PushTalk SH902i

Table of Contents