Direct Entry Of A Phone Number; Phone Book - Skoda Bolero Owner's Manual

Direct entry of a phone number

›
Press  the button.
A screen appears to enter the phone number
You can select the following functions:
Delete the digit

Dial the entered number
 1)
Add a prefix if this option has been set in the telephone set-
 2)
tings » page 33
Entering a number using the voice control

 Mailbox Select the mailbox if the mailbox number is entered in the phone
settings » page 33 or directly enter the number
The input screen also functions as an alphanumeric keypad that you can use to
search for contacts in the phonebook.
For example, if you enter 32, the unit will display contacts with the letter se-
quence DA, FA, EB, etc.
Select the desired contact by pressing the corresponding function key.
1) If no number is entered, the last dialled number will be displayed after you press the symbol key .
2)
If the addition of a prefix option is switched on, but the prefix is not entered in the phone settings, the
last dialled number will be displayed in the input field  or the last number dialled. If the code is defined
in the input line and a number is entered, by pressing the symbol key  the prefix is added in front of
telephone number and connection starts.
3) In some phones, a confirmation for importing contacts to the device is required.
4)
Some phones do not support downloading of contacts from the SIM card.
5)
This function is only supported by some phones.
38
Communication
Fig. 23
Direct entry of a phone number
» Fig. 23.
» page 12

Phone book

›
Press  the button.
Up to 2000 free memory locations for imported phone contacts are available in
the phone book of the device. Each contact can contain up to 5 telephone
numbers.
The phone book can also be called up during an ongoing call.
After successful pairing, the contacts are imported
Loading the directory
Upon first connection of the phone with the device, the system begins to im-
port the phone book from the phone and from the SIM card
of the device . Depending on the number of contacts this may take several mi-
3)
nutes to complete.
If the directory import from the phone contains more than 2000 contacts,
loading is stopped and the message Contacts not completely imported. ap-
pears on the screen. Only those contacts already loaded are available, these
are in the menu .
The first 200 contacts along with the contact data, including the picture in the
phone associated with the contact, are downloaded onto the device
memory .
5)
If an error occurs while loading the phone book, the message Import failed.
Please try again and check whether the BT device ... allows connections.
Update directory
Each time the phone has established a new connection with the device, the
relevant phone book will be updated.
During the update, the phone book which was stored after the last completed
update will be available. Newly stored telephone numbers are only shown af-
ter the updating has ended.
.
3)
into the memory
4)
