Sound Setup; Screen Settings; Fig - Skoda Bolero Owner's Manual

Sound setup

Fig. 11 Sound settings / Balance - fader settings
›
Press the button or the
 
Volume - Volume settings
■
■ Traffic report - sets the volume for the Traffic program alerts (TP)
Voice control - Sets the volume for the voice control
■
Maximum switch-on volume - Sets the maximum volume after switching
■
on
Volume adjustment - Speed-dependent volume increase
■
iPod volume - Sets the volume for the connected iPod (on the MEDIA input)
■
■ Quiet - Low volume
Medium - Medium volume
■
Loud - High volume
■
■ AUX volume - Sets the volume for the device connected via AUX
Quiet - Low volume
■
Medium - Medium volume
■
■ Loud - High volume
Bluetooth audio - Sets the volume of the connected Bluetooth
■
Quiet - Low volume
■
■ Medium - Medium volume
Loud - High volume
■
Audio lowering: - Setting the reduction of the volume when the park dis-
■
tance control is active
Off - switches off
■
Weak - weak reduction
■
1)
If after 10 seconds, the screen is not activated by approaching, touching the screen or operating the
menu button » Fig. 1 on page 5 the screen turns black. You can switch the display back on again by
2
approaching it with your hand, touching it, or operating the menu knob
16
device settings
→ Sound button.
®
.
2
■ Medium - medium input sensitivity
Strong - strong reduction
■
Bass - Mid - Treble - Sets the bass, mid and treble
■
■ Balance - Fader - Sets the balance between left and right, front and rear
Confirmation tone - Switch on/off confirmation tone when a function key is
■
pressed
■ Subwoofer - Subwoofer volume settings
CANTON advanced setup - Setup of the Canton
■
Select equaliser sound - Equaliser settings
■
■ Music - Music
Language - Language
■
Sound focus: - Set the sound perception for different zones in the vehicle
■
interior
Off - Settings apply to the whole vehicle
■
Front - Optimised setting for the front occupants
■
Driver - Optimised setting for the driver
■
CANTON surround - virtual Canton
■
playback)

Screen settings

›
Press the → Screen button.

Switch off screen (in 10 seconds) - Activate/deactivate energy-saving mode
■
for the display
1)
■ Brightness: - Adjusts the brightness of the screen
Brightest - brightest level
■
Brighter - brighter level
■
■ Medium - medium level
Darker - darker level
■
Darkest - darkest level
■
device
■ Confirmation tone - Switch on/off confirmation tone when a function key is
pressed
Show clock in standby mode - Time and date displayed on the screen when
■
the ignition is switched on and the unit is switched off
®
-Sound system
®
-surround system (active during media