MasterForce 241-0805 Operator's Manual page 10

FIG. 3
FIG. 4
To empty dust box drawer (Fig. 3–4)
1. Press the release button on the dust
box door and open the door fully
(Fig. 3).
2. Pull out the dust drawer and empty it
(Fig. 4).
3. Put the dust drawer back into the dust
box. Close the dust box door, making
sure the released button is engaged
securely.
Page 9
ASSEMBLY
This random orbit sander is equipped
with an ON/OFF rocker switch that is
located on the front of the handle.
1. To turn the sander ON, push the I side
of the rocker switch.
2. To turn the sander OFF, push the O
side of the rocker switch.
SPEED SELECTOR (FIG. 5)
FIG. 5
Use a practice piece of material to
determine the right speed for each job.
Vary the speed in order to find the best
speed for the accessory that you are
using and the job to be done.
DUST-SEALED ON/OFF
ROCKER SWITCH