Advertisement
OPERATING MANUAL
2.6 A Random Orbit Sander
241-0804
Parts missing or damaged? Questions? Toll-Free Help Line –
1-866-917-4374
IMPORTANT :
IMPORTANT:Read this operating manual carefully before using your new
tool.Pay close attention to all Safety Instructions, Warnings, and Caution
sections.Use this tool properly, and only for its intended use.
Safety symbols in this manual are used to indicate possible dangers. The
safety symbols and their explanations require your full understanding. The
safety warnings do not by themselves eliminate any danger, and they are not
a substitute for proper accident prevention measures.
This Safety Alert Symbol indicates caution, warning, or danger. Failure
to obey a safety warning may result in serious injury to yourself or others.
To reduce the risk of injury, fire, or electric shock, always follow the safety
precautions.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for MasterForce 241-0804
Summary of Contents for MasterForce 241-0804
- Page 1 OPERATING MANUAL 2.6 A Random Orbit Sander 241-0804 Parts missing or damaged? Questions? Toll-Free Help Line – 1-866-917-4374 IMPORTANT : IMPORTANT:Read this operating manual carefully before using your new tool.Pay close attention to all Safety Instructions, Warnings, and Caution sections.Use this tool properly, and only for its intended use.
-
Page 2: Table Of Contents
TABLE OF CONTENTS RULES FOR SAFE OPERATION KNOW YOUR TOOL Specification……………..…………………………..………..…..……Page 2 Before operating this tool, carefully read this operating manual and all of the labels affixed to the random orbit sander. Keep this manual available for Rules for Safe Operation…………………………………………….…Page 3 future reference. - Page 3 Before connecting the tool to a power source (receptacle, outlet, etc.), be Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. sure voltage supplied is the same as that specified on the nameplate of the tool.
-
Page 4: Operation
OPERATION SPECIFIC SAFETY RULES FOR SANDER KNOW YOUR RANDOM ORBIT SANDER (see Fig. 1) Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Before attempting to use this random orbit sander, familiarize yourself with Contact with a “live”... - Page 5 ASSEMBLY AND ADJUSTMENTS INSTALLING AND REMOVING THE DUST BOX WARNING: Remove the random orbit sander from the carton, and examine To install: itcarefully. Do not discard the carton or any packaging material until all parts Put the dust drawer back into the dust box. Close the dust box door, making have been examined.
- Page 6 GENERAL SANDING 3. Keep the sanding disc flat on the workpiece and constantly moving across the workpiece. Use long, sweeping circular or elliptical strokes. WARNING: Finish sanding can produce clouds of fine sanding dust that could ignite in the presence of sparks or an open flame. To avoid injury, always 4.
-
Page 7: Accessories
for the roughing operation, and finish by using successively finer grits. MAINTENANCE Before each use inspect the random orbit sander, the ON/OFF switch, and the Coarse Grit 60–80 cord for damage. Check for damaged, missing, or worn parts. Check for loose Initial sanding on rougher surfaces. - Page 8 Exploded View Parts List Part Name Power Cord & Plug Cord Guard Tapping Screw 3.5x16 Cord Anchorage Speed Adjuster Brush Holder Ball Bearing Plain Washer Switch Carbon Brush Fixing Board Switch Cover Left Housing Assy Tapping Screw 2.2x13 Dust Box Cover Right Dust Box Filter Assy Left Dust Box...
-
Page 9: Warranty
WARRANTY If, during normal use, this MASTERFORCE power tool breaks or fails due to a defect in material or workmanship within three years from the date of original purchase, simply bring this tool and its sales receipt back to your...
Need help?
Do you have a question about the 241-0804 and is the answer not in the manual?
Questions and answers
How to get replacement brushes for a 241-0804 orbital sander