Sound Effect - Kenwood DNX994S Instruction Manual

NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost (P.81)
– Equalizer Control/ Sound Effect/ Listening
Position (P.79, 81, 82)
– Speaker Setup (P.77)
– High-resolution Sound Source File Playback
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, Disc, Bluetooth audio,
Apple CarPlay or Android Auto as the Front
Source, you cannot select USB, SD or iPod as the
Rear Source.

Sound Effect

You can set sound effects.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Sound Effect].
4
Set each item as follows.
Bass Boost
■
Sets the amount of bass boost among "OFF"/
"1"/ "2"/ "3".
Loudness
■
Sets the amounts of boost of low and high
tones.
"OFF", "Low", "High"
Drive Equalizer+
■
The sound quality is automatically optimized
to meet the current car speed by GPS.
"OFF", "ON"
Space Enhancer
■
Select the feeling of sound space
enhancement.
"OFF"/ "Small"/ "Medium"/ "Large".
This setting is not available during HD Radio
tuner source.
Supreme
■
Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement
with proprietary algorithm, the high-
frequency range that is cut off when
encoding.
Controlling Audio
81
English