User Interface Setup - Kenwood DNX994S Instruction Manual

User Interface Setup

You can setup user interface parameters.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [SETUP].
h SETUP screen appears. h
3
Touch [User Interface].
h User Interface screen appears.
h
4
Set each item as follows.
Beep
■
Turns the key touch tone on or off.
Default is "ON".
Parking Assist Display
■
When an ADS adapter is connected, you can
display information about obstacles around
the car.
ON: Always displays information.
Dyn. (Default): Displays information when
the sensor detects obstacles.
OFF: Cancels.
This can be set when the iDataLink
(commercially available) is connected.
Parking Assist Position
■
Select where information about obstacles is
displayed on the screen (left or right).
"Left"/ "Right" (Default)
This can be set when the iDataLink
(commercially available) is connected.
Language Select Mode
■
Selects the mode to select a language.
Easy (Default): Selects a language easily.
Advanced: Allows you to select languages
for respective items.*
Language Select
■
Selects a language.
Clock
■
NAV-SYNC (Default): Synchronizes the clock
time with navigation.
Manual: Sets the clock manually
Time Zone
■
If you have selected [Manual] for Clock,
select the time zone.
Clock Adjust
■
If you select [Manual] for Clock, adjust the
date and time manually. (P.73)
* If you select [Advanced] for Language
Select Mode, the following screen
appears.
GUI Language Select
■
Selects the display language used for the
control screen and so forth.
Navigation Language Select
■
Selects the language used for navigation.
Ñ
Adjust the date and time
manually.
1
Touch [Time Zone] in the User Interface
screen.
2
Select the time zone.
3
Touch [Clock Adjust] in the User Interface
screen.
4
Adjust the date, then adjust the time.
5
Touch [Set].
Setting Up
73
English