Pjlink Commands - Casio XJ-L8300HN User Manual

PJLink Commands

This projector supports standard protocol PJLink for projector control. Supported commands
are as below.
Command
POWR
POWR ?
INST ?
INPT
INPT ?
AVMT
AVMT ?
ERST ?
LAMP ?
NAME ?
INF1 ?
INF2 ?
INFO ?
CLSS ?
For details, visit the CASIO website at the URL below.
http://world.casio.com/download/projector/
40 Controlling the projector remotely
Control details
Power supply control
Power supply status
query
Input selection index
query
Input selection
Input selection query
AV MUTE control
AV MUTE status query
Error status query
Light source status query
Projector name query
Manufacturer name query "CASIO" is returned.
Model name query
Other information query
Class information query
Notes
Parameters
0 = Standby
1 = Power ON
Parameters
0 = Standby 1 = Power ON
No.1 11
No.2 31
No.3 32
No.4 51
Parameters
11: RGB 1
31: HDMI 1
32: HDMI 2
51: HDBaseT
Parameters
VIDEO & AUDIO MUTE mode off
VIDEO & AUDIO MUTE mode on
Parameters
1st byte: Indicates fan errors, range 0 , 2
2nd byte: Indicates light source errors, range 0 , 2
3rd byte: Indicates temperature errors, range 0 , 2
4th byte: Fixed at 0
Definitions for each value from 0 or 2 are as follows.
0 = No error known 1 = Warning 2 = Error
Parameters
1st digits (1 – 5 digits) : Light source cumulative
operating time
"CASIO" is returned.
"XJ-L8300HN" is returned.
"" (null) is returned.
"1" is returned.