Table of Contents
Advertisement
5. Switch all of the connected equipment on.
6. The projector will search for input signals. The current input signal being scanned appears.
If the projector does not detect a valid signal, the message "No Signal" will continue
displaying until an input signal is found.
You can also press INPUT to select your desired input signal. See
on page
28.
• Please use the original accessories (e.g. power cord) to avoid possible dangers such as electric shock
and fire.
• The Setup Wizard screenshots are for reference only and may differ from the actual design.
• If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the
message "Out of Range" displayed on the background screen. Please change to an input signal which is
compatible with the projector's resolution or set the input signal to a lower setting. See
page
52.
• If no signal is detected for 3 minutes, the projector automatically enters saving mode.
Using the menus
The projector is equipped with On-Screen Display (OSD) menus for making various
adjustments and settings.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the OSD menu.
1
2
PICTURE
Picture Mode
User Mode Settings
Brightness
Contrast
Color
3
Tint
Sharpness
Advanced
Reset Current Picture Mode
4
To access the OSD menu, press MENU on the projector or remote control.
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use ENTER on the projector or remote control to confirm the selected menu item.
26
Operation
1
Bright
5
2
3
6
Exit
"Switching input signal"
Main menu
Current input
4
icon
signal
Main menu
Status
5
Button operation
Sub-menu
6
guidance.
"Timing chart" on
Hide quick links:
Advertisement
Table of Contents
