Tape - Recording; Recording Your Favorite Cd Tracks On A Tape; Cd-Tape Synchro Recording - Aiwa DBX-DS55/DS50 Operating Instructions Manual

Tape – Recording
Recording your favorite
CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole CD on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
(DBX-DS55/DS50/DS33/DS30 only)
Press FUNCTION repeatedly to switch
the function to TAPE, then press PLAY
MODE repeatedly to select "g" to
record on one side. Select "h or
"j" to record on both sides.
If you record on the reverse side, press
nN repeatedly to light up the n
indicator, then press x.
3
Press FUNCTION repeatedly to switch
the function to CD and load a disc you
want to record.
If you have already loaded the disc, press
DISC SKIP/EX-CHANGE to select the
disc.
When you want to record a folder from an
MP3 disc, be sure to press PLAY MODE
repeatedly to select FLDR, then press
FOLDER + or – on the remote repeatedly to
select the desired folder before proceeding.
4
Press CD SYNC.
The tape deck stands by for recording.
"REC" flashes.
5
Press REC PAUSE/START.
Recording starts. When the recording is
completed, the CD player and the tape deck
stop automatically.
To stop recording
Press x.
GB
18
To record a disc by specifying
track order
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 6 of "Creating your own
program" (page 12).
Tips
• For DBX-DS55/DS50/DS33/DS30, if you select
both sides recording and the tape reaches the end of
the front side part-way through a track, the entire
track is recorded again from the beginning of the
reverse side.
• For DBX-DS55/DS50/DS33/DS30, when you
record on both sides, be sure to start from the front
side. If you start from the reverse side, recording
stops at the end of the reverse side.