Cal Spas PATIO Owner's Manual page 51

Listening to Devices
There are three ways to connect your device to the
media locker: With the USB connection, Bluetooth
connection, and the auxiliary input.
1 . Connecting via USB
The Aquatic AV digital media locker comes with one
USB connector for Apple devices. If you have another
kind of device, you will need to supply your own USB
connector, such as the type shown below.
Apple USB connector
1. Attach your device to the USB cable inside the
digital media locker using the appropriate USB
connector.
2. Secure the device with the anchor straps.
3. Close and lock the media locker's protective door.
4. Press POWER on the remote control or Power
button on the locker to turn it ON.
5. Press MODE on the remote control to select USB
mode. Use the buttons as shown in the remote
function chart.
Note: When USB devices are connected to the
USB input, the device's battery will charge .
Search for Songs and Playlists
Apple devices
1. Press SEARCH to enter iPod searching mode.
2. Once in searching mode, the remote will display
'Playlist'. Continue to press SEARCH to scroll
through the search modes below:
1) Playlist 2) Artist 3) Album 4) Song 5) Genre
6) Composer 7) Audio Book
3. Press PLAY/PAUSE To select the desired search
mode.
4. Press Volume UP/DOWN to scroll through your
media in the selected search mode.
2017 Portable Spa
LTR20171001, Rev. B
USB micro B connector
5. Once you find the desired media, press PLAY/
PAUSE to make your selection. If your selection is
a song, it will begin to play. If you select a playlist,
artist, album, genre, composer or audio book, the
songs in the selected folder will be visible. Press
PLAY/PAUSE to play the desired song within the
folder.
Other USB devices
1. Press SEARCH to enter the USB searching mode.
2. Press Volume UP/DOWN to scroll through the
folders on your USB device. To select a folder,
press the PLAY/PAUSE button.
3. Press Volume UP/DOWN to scroll through the
songs in the folder and press PLAY/PAUSE to
play the desired song.
2 . Connecting via Bluetooth
1. Switch on your Bluetooth device.
2. Select 'AQUATIC AV' from the list of available
devices to pair (no password is needed).
Only one Bluetooth device can be paired with the
Digital Media Locker at any time.
Bluetooth mode will be activated once a Bluetooth
device is linked. Play the song from device and the
sound will play through the Digital Media Locker.
Press PLAY/PAUSE to play or pause the
•
song.
• Press FAST REWIND or FORWARD buttons
to play previous/next song file.
Track and volume can be controlled directly from your
Bluetooth device, remote control or door controls.
3 . Connecting via Auxiliary Input
When you connect your device via the auxiliary input,
you play media directly to the audio input of the media
locker. The remote control can not control your device
when it is connected through the auxiliary input. You
will need a 3.5 mm audio connector as shown below.
3.5 mm audio cable
49
www.calspas.com