Caution In Servicing - Denon ADV-700 Service Manual

3. Traverse Unit disassembly
(1) Remove 24P FFC (CX241), 15P FFC (CX151),
5P PH WIRE (CX051) and 3P PH WIRE (CX031)
connecting with from the DVD Main P.W.B.
(2) Remove 4 screws of
(3) Remove Traverse Unit to arrow direction.
Note for disassembly Traverse Unit
(1) When assembling, reverse the order of the above.
(2) When inserting Tray, confirm boss on Slide Cam set
to ditch of the Tray (Compare with right drawing).

CAUTION IN SERVICING

Initialization
Initialization should be performed when the µcom, peripheral parts of µcom, and DVD Main P.W.B. are replaced.
How to initialize
At the player is in the state of AC OFF, turn the AC ON with pressing the PLAY ( ) and STOP ( ) buttons simultaneously.
Check that the Standby LED lights orange and the initialization has been activated. (until "INITIALIZE" disappears from
the FL display).
Note: All user settings will be lost and its factory setting will be recovered when this initialization is made. So make sure to
memorize your setting for restoring after the initialization.
fixing Damper.
2
15P FFC (CX151)
24P FFC (CX241)
2
Slide gear
Tray
ADV-700
3P PH WIRE (CX031)
Damper
DVD Main P.W.B.
Boss
10