Connecting Instructions - Rointe KYROS Instruction Manual

3. Connecting Instructions

Connection to the mains must be made observing the voltage stated
on the product technical data label.
This appliance is designed to be permanently installed connected
to fixed facilities. The heated towel rail power supply circuit must
have an all-pole circuit breaker switch with a separation of at least
3 mm between the contacts.
The appliance must be installed, if possible, away from any source
of draughts (windows, doors) or any other thing which may affect its
functioning. In this way, the temperature will not be affected. Place
any object which might prevent the air flow (furniture, armchairs)
50 cm away from the front of the appliance.
The heater must never be installed immediately below a power point.
The lower part of the control panel must be placed at least 15 cm
from the floor.
For any appliance, if the power cable is damaged, it must be replaced
by a specific cable. The replacement of the cable must be done
by the maker, its after-sales service or qualified personnel. The
technical specifications of your appliance appear on the technical
data label.
OK
27