Download
Share
Print this page
Whalen WMCPRO-9 Instruction Booklet
  1. Manuals
  2. Brands
  3. Whalen Manuals
  4. Indoor Furnishing
  5. WMCPRO-9
  6. Instruction booklet

Whalen WMCPRO-9 Instruction Booklet

Flat panel console
Hide thumbs

Advertisement

Quick Links

Download this manual
Flat Panel Console (WMCPRO-9)
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to
the store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-866-942-5362
ONLINE: www.whalenstyle.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Whalen Furniture Mfg. Inc.
8:30 a.m. - 4:30 p.m. PST, Monday - Friday
Video Instruction Guides
Go to http://whalen.showuhow.com to view step-by-step instructional
videos for assembling and installing your product. Enter the following
product number on the ShowUhow homepage.
WMCPRO-9
LOT NUMBER:
DATE PURCHASED:
EMAIL: parts@whalenfurniture.com
Page 1
/
/
Factory No. 33- 10944

Advertisement

loading
Need help?

Need help?

Do you have a question about the WMCPRO-9 and is the answer not in the manual?

Questions and answers

Related Manuals for Whalen WMCPRO-9

Summary of Contents for Whalen WMCPRO-9

  • Page 1 8:30 a.m. - 4:30 p.m. PST, Monday - Friday EMAIL: parts@whalenfurniture.com ONLINE: www.whalenstyle.com Video Instruction Guides Go to http://whalen.showuhow.com to view step-by-step instructional videos for assembling and installing your product. Enter the following product number on the ShowUhow homepage. WMCPRO-9 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
  • Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture CATALOG: Flat Panel Console (WMCPRO-9) DATE OF MANUFACTURE: February 2012 MADE IN CHINA FITS UP TO MOST 47”...
  • Page 3 Model # WMCPRO-9 Parts List Please read completely through the instructions and verify that all parts listed are present before beginning assembly. A- Left Side Frame (1) B- Right Side Frame (1) C- Back Panel (1) D - Back Top Frame (1)
  • Page 4 Model # WMCPRO-9 Hardware List (2) 3/4” Bolt (3) 1-5/8” Bolt (1) Suction Cup (19+1 extra) (8+1 extra) (16+1 extra) (4) 2-1/4” Bolt (5) Hex Nut (6) Lock Washer (7) Flat Washer (8+1 extra) (8+1 extra) (32+1 extra) (36+1 extra)
  • Page 5 Model # WMCPRO-9 Assembly Instructions 1-5/8” Bolt Flat Washer Lock Washer (8 used in this step) (8 used in this step) (8 used in this step) ⑦ ⑥ ③ Note: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts.
  • Page 6 Model # WMCPRO-9 Assembly Instructions #3 x 9 mm Screw (4 used in this step) ⑧ 2. Pick up Back Panel (C) and fit it between the front of Left and Right Side Frames (A and B). Insert and screw four #3 x 9 mm Screws (8) through the corner brackets to secure the Back Panel in place.
  • Page 7 Model # WMCPRO-9 Assembly Instructions Floor Leveler (2 used in this step) ⑩ Flat Washer Lock Washer 2-1/4” Bolt (4 used in this step) (4 used in this step) (4 used in this step) ⑥ ④ ⑦ 3. Lay down the unit on a level and protective surface as shown.
  • Page 8 Model # WMCPRO-9 Assembly Instructions 1-5/8” Bolt Flat Washer Lock Washer (4 used in this step) (8 used in this step) (8 used in this step) ⑥ ⑦ ③ 6. Attach Middle Crossbar (H) and Middle Stringer (I) to the middle rail of Left and Right Side Frame (A and B).
  • Page 9 Model # WMCPRO-9 Assembly Instructions Hardware provided Tools required Floor Levelers No tool required 8. Adjust the Large Floor Levelers (10) installed and the small floor levelers pre-attached at the bottom of Bottom Stringer (K) to level the unit. 1-866-942-5362 Please call for replacement parts or assistance: Whalen Furniture Mfg.
  • Page 10 Model # WMCPRO-9 Assembly Instructions Hex Nut (4 used in this step) ⑤ Flat Washer 2-1/4” Bolt Lock Washer (8 used in this step) (8 used in this step) (4 used in this step) ⑥ ④ ⑦ 9. Attach Swiveling Bracket (O) to the top of Back Top Frame (D) with the pivoting bolt head up.
  • Page 11 Model # WMCPRO-9 Assembly Instructions Flat Washer Hex Nut Lock Washer 3/4” Bolt (8 used in this step) (4 used in this step) (4 used in this step) (4 used in this step) ⑥ ⑤ ② ⑦ 10. Attach XYZ Mounting Frame (P) to the Swiveling Bracket (O) using four 3/4” Bolts (2) with Washers and then secure with Hex Nuts (5).
  • Page 12 Model # WMCPRO-9 Mounting Monitor Bracket to a television with a flat back Note: For televisions with a curved back or recessed back proceed directly to step #13. 11. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded inserts on the back of the TV.
  • Page 13 Model # WMCPRO-9 Mounting Monitor Bracket to a television with a curved / recess back 13. Determine the correct diameter of the bolt your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter any resistance, stop immediately. If you are unable to find the correct bolt consult a local hardware store.
  • Page 14 Model # WMCPRO-9 Assembly Instructions 15. Once the Monitor Brackets (Q) are attached onto the back of television, ask for assistance to lift the television up to attach the Monitor Brackets onto the XYZ Mounting Frame (P). Set the hooks on Monitor Brackets over the Mounting Frame then lower them onto the bars of Mounting Frame.
  • Page 15 Model # WMCPRO-9 Assembly Instructions Cable Control 3/4” Bolt (2 used in this step) (4 used in this step) ○ ② 16. Attach 2 Cable Controls (R) onto the backside of assembled unit with the 3/4” Bolts (2). Tighten the bolts with M4 Allen Wrench provided.
  • Page 16 Model # WMCPRO-9 Assembly Instructions Suction Cup Glass Alignment Template (19 used in this step) (1 used in this step) ⑨ ① 18. Put Suction Cups (1) firmly into the top holes on Crossbars and Stringers (F, G, H, I, J and K).
  • Page 17 Model # WMCPRO-9 Assembly Instructions Tools required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit. 20. Carefully move the console and position in your desired location against the wall. Now follow the instructions printed on the plastic bag containing Tipping Restraint Hardware to mount the Tipping Restraint Hardware Kit to the console and wall.

  • Page 18: Care And Maintenance

    Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from the date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.