Roland VersaCAMM VP-540 Service Notes page 90

Remove the 4 rivets as shown in the figure, and slide the
9
Gear Cover to the front side, and remove it.
Remove the spring.
10
Remove the 3 screws fixing the Flange, and remove the
11
motor together with the Flange.
Remove the 4 screws as shown in the figure to remove
12
the motor from the Flange.
And fix the new motor to the Flange.
Be careful with the fixing direction of the
Flange.
RIVET
CUT
SCREW
3-27
GEAR COVER
RIVET
SPRING
SCREW
MOTOR
FLANGE
SCREW
FLANGE
SCREW