Move the Head Carriage to the highest position of the
4
bed.
Confirm that Head Carriage is connected to Tool Carriage
and lock the connected carriages.
The right end is the highest position of the
bed.
Turn on the Sub Power SW while pressing [
5
[
] keys to enter the Service Mode.
Select [CUTTING MENU]> [FORCE ADJUST].
6
Only the Tool Carriage can be moved in
[FORCE ADJUST] menu.
Select [FORCE ADJUST]> [30gf], and press [PAUSE]
7
key to move the Tool Carriage down.
], [
] and
4-51
Click!
+
MENU
MENU
SERVICE MENU
MENU
SERVICE MENU
[ ] [ ]
SERVICE MENU
CUTTING MENU
[ ] [ ]
CUTTING MENU
FORCE ADJUST
CUTTING MENU
FORCE ADJUST
[ ]
FORCE ADJUST
30gf
[ ]
30gf
17
16
[PAUSE]