Philips Network Adaper Owner's Manual page 13

Net 1Card IB 2/15/00 12:18 PM
T
RANSMITTER
R CVR POWER allows you to turn the Receiver TVs
"ON," "OFF," or leave them at their "CURRENT"
setting. Selecting "CURRENT" allows the Receiver TVs
to adjust the power, even if "LOCK" is selected
under"RCVR LOCKOUT." The default setting is "CUR-
RENT."
If not already in the "TRANSMITTER CON-
TROL" menu, press the D button on the remote control.
Then press the button until "RCVR POWER" is
highlighted.
Press the – ( ) or + ( ) button to select "CUR-
RENT," "ON,"or "OFF."
When finished, press the
"RCVR CHANNEL."
TRANSMITTER CONTROL
ADDRESS TYPE BROADCAST
BROADCAST
RCVR POWER
RCVR VOLUME
RCVR CHANNEL
TRANSMITTER CONTROL
RCVR LOCKOUT
ADDRESS TYPE BROADCAST
UPDATE RCVR TVS
BROADCAST
EXIT MENU
RCVR POWER
PRESS +/- TO CHANGE
RCVR VOLUME
RCVR CHANNEL
TRANSMITTER CONTROL
RCVR LOCKOUT
ADDRESS TYPE BROADCAST
UPDATE RCVR TVS
BROADCAST
EXIT MENU
RCVR POWER
PRESS +/- TO CHANGE
RCVR VOLUME
RCVR CHANNEL
RCVR LOCKOUT
UPDATE RCVR TVS
EXIT MENU
PRESS +/- TO CHANGE
Page 24
C
ONTROL
BEGIN
button to highlight
ALL SETS
CURRENT
CURRENT
CURRENT
UNLOCKED
ALL SETS
ON
CURRENT
CURRENT
UNLOCKED
ALL SETS
OFF
CURRENT
CURRENT
UNLOCKED
24
T C
RANSMITTER
R
CVR VOLUME allows you to select the sound level
(0 to 63 or "CURRENT") at which the Receiver TVs
will broadcast you message. The default setting for both
features is "CURRENT."
It is recommended that you leave the Volume setting at
"CURRENT" when broadcasting your message. This
does not change the level on the Receiver TVs and
allows the Receiver TVs to individually adjust the vol-
ume – even when the system is "LOCKED" – to the best
volumes for the rooms the TVs are in. The numbers 0 to
63 represent a range, with 0 equaling minimum and 63
equaling maximum. The exact sound level will vary from
TV to TV according to which model of TV used, as well
as the size and acoustics of each room. The default set-
ting is "CURRENT."
BEGIN
If not already in the "TRANSMITTER CON-
TROL" menu, press the D button on the remote con-
trol. Then press the button until "RCVR VOLUME"
is highlighted.
Press the button to highlight "RCVR VOL-
UME." Press the – ( ) or + ( ) button to select
"CURRENT," or any number between 0 and 63. You can
also use the Number buttons to select a number.
When finished, press the
"RCVR CHANNEL."
TRANSMITTER CONTROL
ADDRESS TYPE BROADCAST
BROADCAST ALL SETS
RCVR POWER CURRENT
RCVR VOLUME CURRENT
RCVR CHANNEL CURRENT
RCVR LOCKOUT UNLOCKED
UPDATE RCVR TVS
EXIT MENU
TRANSMITTER CONTROL
+/- OR DIGITS TO CHANGE
ADDRESS TYPE BROADCAST
BROADCAST
RCVR POWER
RCVR VOLUME
RCVR CHANNEL
RCVR LOCKOUT UNLOCKED
UPDATE RCVR TVS
EXIT MENU
+/- OR DIGITS TO CHANGE
25
ONTROL
button to highlight
TRANSMITTER CONTROL
ADDRESS TYPE BROADCAST
BROADCAST ALL SETS
RCVR POWER CURRENT
RCVR VOLUME 0
RCVR CHANNEL CURRENT
RCVR LOCKOUT UNLOCKED
UPDATE RCVR TVS
EXIT MENU
+/- OR DIGITS TO CHANGE
ALL SETS
CURRENT
63
CURRENT