ASROCK Vig103M Manual page 54

3. In Integrated Peripherals change following settings for Windows 8.1/10
Network Stack
Ipv4 PXE Support
Network Stack
When these settings have been changed, press <Esc> or the Back Button to go back to the Advanced
Menu.
4. From the Advanced menu navigate to Windows OS Configuration.
5. In Integrated Peripherals change following settings for Windows 8.1/10
Windows 8.1/10 WHQL Support
Fast Boot
6. Select Secure Boot.
7. In Secure Boot change following settings
Secure Boot Support
Secure Boot Mode
V1.0
[Enabled]
[Enabled]
[Enabled]
Figure 29: Integrated Peripherals
[Enabled]
[Enabled]
Figure 41: Windows OS Configuration
[Enabled]
[Custom]
Vig103M Motherboard Manual
53