ASROCK Vig103M Manual page 49

4.9 Security
This menu is for setting security rights for administrator and user and configuring system
security.

If you have forgotten your BIOS password, erase the CMOS RAM to clear the BIOS password.

The Administrator or User Password items on top of the screen show the default Not installed.
After you set a password, these items show Installed.
Administrator Password
If you have set an administrator password, we recommend that you enter the administrator password for
accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS
setup program.
To set an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Create New Password box, key in a password, then press <Enter>.
3. Confirm the password when prompted.
To change an administrator password:
1. Select the Administrator Password item and press <Enter>.
2. From the Enter Current Password box, key in the current password, then press <Enter>.
3. From the Create New Password box, key in a new password, then press <Enter> Confirm the
password when prompted.
V1.0
Figure 36: Security
Vig103M Motherboard Manual
48