Bios Settings For Windows 7 And Windows 8 O/S - ASROCK Vig103M Manual

4.13 BIOS settings for Windows 7 and Windows 8/8.1 O/S
4.13.1 Windows UEFI mode for Windows 8/8.1
Vig103M system configured with Windows 8/8.1 will have following default BIOS settings. If you wish to
downgrade to Windows 7 then BIOS must be configured to Non-UEFI mode.
Advanced\Integrated Peripherals
Network Stack
Ipv4 PXE Support
Network Stack
Advanced\Windows OS Configuration
Windows 8.1/10 WHQL Support
Fast Boot
Advanced\Windows OS Configuration\Secure Boot
Secure Boot Support
Secure Boot Mode
Advanced\Windows OS Configuration\Secure Boot\Key Management
Provision Factory Default Keys
Note
Please ensure the changes of the following settings are performed by personnel with some previous
experience/knowledge of altering BIOS settings.
4.13.2 Enabling Windows UEFI mode for Windows 8/8.1 Operating System
1. From the BIOS main menu bar select 'Advanced'
Navigate to the Integrated Peripherals item.
2.
V1.0
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Custom]
[Enabled]
Figure 289: Advanced Menu
Vig103M Motherboard Manual
52