ASROCK Vig103M Manual page 46

4.6.5 USB Configuration
Allows you to set onboard controllers and device function.
USB Controller
This item allows you to enable or disable the onboard USB controller. Configuration options: [Enabled]
[Disabled]
XHCI Hand-off
This item allows you to enable or disable the XHCI support. Configuration options: [Enabled] [Disabled]
Legacy USB Support
Allows you to enable or disable legacy support for USB function. Configuration options: [Enabled]
[Disabled] [Auto]
USB Speed Optimization
Allows you to enhance USB throughput, which cause slight increase in power consumption in idle mode.
Configuration options: [Enabled] [Disabled] [Auto]
4.6.6 Super IO Configuration
Allows you to set Super I/O chip parameters.
4.6.6.1 Serial (COM) Port 0 Configuration
Serial (COM) Port0
Allows you to enable or disabled the serial (COM) port 0. Configuration options: [Enabled] [Disabled]
Serial (COM) Port0 Settings
This item allows you to set Serial Port0. Automatically optimizes IRQ when set to "Auto". Configuration
options: [Auto] [IO=3F8h; IRQ=4;] [IO=3F8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2F8h; IRQ=3, 4, 5, 6, 7,
9, 10, 11, 12;] [IO=3E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;] [IO=2E8h; IRQ=3, 4, 5, 6, 7, 9, 10, 11, 12;]
4.6.7 Hardware Monitor
Allows you to monitor the hardware status.
CPU Smart Fan Control
Allows you to enable or disable the CPU Smart Fan Control. Configuration options: [Enabled] [Disabled]
SYS Fan1 Smart Fan Control
Allows you to enable or disable the System Smart Fan Control. Configuration options: [Enabled] [Disabled]
CPU Fan Fail Warning Control
Allows you to enable or disable the CPU Fan Fail Warning Control. Configuration options: [Enabled]
[Disabled]
4.6.8 Power Management Setup
Allows you to configure system power management and power behaviours.
EuP 2013
Allows you to enable or disable the system power consumption optimum according to EuP2013 regulation.
Configuration options: [Enabled] [Disabled]
Restore after AC Power Loss
This item allows you to change system behaviour while encountering AC power loss. Configuration
options: [Power Off] [Power On] [Last State]
System Power Fault Protection
Allows you to avoid abnormal voltage source and power connection. Selecting "Enable" protects system
from unexpected operation and remain shut down status. Configuration options: [Enabled] [Disabled]
45
V1.0 Vig103M Motherboard Manual