ASROCK Vig103M Manual page 44

4.6 Advanced
The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup
program. The Main menu provides you an overview of the basic system information, and
allows you to set the system date, time, language, and security settings.
Figure 33: Advanced
4.6.1 PCI Subsystem Settings
Allows you to set PCI Express interface protocol and latency timer.
PEG0 – Max Link Speed
Allows you to set PCI protocol depending on the installed devices. Configuration options: [Auto] [Gen1]
[Gen2] [Gen3]
PCI Latency Timer
This item appears only when you set the TPM Support item to [Enabled] and allows you to enable or
disable the TPM after POST. Reboot your system for the changes to take effect.
Configuration options: [32 PCI Bus Clocks] [64 PCI Bus Clocks] [96 PCI Bus Clocks] [128 PCI Bus Clocks]
[128 PCI Bus Clocks] [160 PCI Bus Clocks] [192 PCI Bus Clocks] [224 PCI Bus Clocks] [248 PCI Bus
Clocks]
4.6.2 ACPI Settings
Allows you to set parameters on onboard LED behaviours.
Power LED
This item allows alteration of the behaviour of onboard LEDs. Configuration options: [Blinking] [Dual Color]
43
V1.0 Vig103M Motherboard Manual