Router Configuration - SWEEX LB200010 Manual

English version
Select the option 'automatic assignment of an IP address' and confirm with 'OK'.
Attention: The mentioned commands in quotation marks should not be used when performing the tasks.
Now open the start menu, select 'perform' and enter "CMD". Confirm with 'Enter'. Give the 'Ipconfig' command and confirm with 'Enter'.
Now give the 'Ipconfig/release' command and confirm with 'Enter'.
The IP address is being renewed. You will find that in this case, too, the IP address is now 0.0.0.0. Now give the 'Ipconfig/renew' command and
confirm with 'Enter'.
W W W . S W E E X . C O M
The router will now assign a new IP address.
Resetting the router to the factory settings
Attention: The following procedure will erase all data entered into the router. This means that your inlog name, your password, MAC address and IP
addresses will have to be entered once more.
For a complete router reset press the reset button with a pen and keep it pressed for four seconds. The LAN LEDs 1 through 4 will all light up to show
that the reset procedure is completed. The router settings will return to 'factory default'.
Pressing the reset button once will effect a regular router reset. In this case the data entered will remain effective.

Router Configuration

As soon as you have completed the network configuration of your computer, you may create the internet connection.
Start up your browser and enter the following address http://192.168.2.1 in the URL bar.
Confirm with 'Enter'.
Click on 'Login' without entering anything in this panel.
English version