Table of Contents
Advertisement
▶
Deep S5
The setting enables/disables the Deep S5 power saving mode. S5 is almost
the same as G3 Mechanical Off, except that the PSU still supplies power,
at a minimum, to the power button to allow return to S0. A full reboot is
required. No previous content is retained. Other components may remain
powered so the computer can "wake" on input from the keyboard, clock,
modem, LAN, or USB device.
** Advanced Resume Events Control **
▶
USB from S3/S4
The item allows the activity of the USB device to wake up the system from
S3/S4 sleep state.
▶
OnChip GbE from S5
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onchip LAN is detected.
▶
PCIE PME
This field specifies whether the system will be awakened from power saving
modes when activity or input signal of onboard PCIE PME is detected.
▶
RTC
When [Enabled], your can set the date and time at which the RTC (real-time
clock) alarm awakens the system from suspend mode.
BX-700W
3-21
Advertisement
Table of Contents
