Advertisement
1. Part Names
1. Plug Inlet: A DC 12V inlet that connects to an external power supply.
2. Plug Inlet: An AC 24V inlet that connects to an external power supply.
3. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks.
PoE (Power over Ethernet) function: Provides power to the device via the same cable as used for the
network connection.
4. AUDIO IN: The connector is used to connect the audio output from other devices to the camera.
5. VIDEO OUT Connector: The connector provides the unit's composite video signals to a monitor. (This
connector adjusts and improves the images.)
6. AUDIO OUT: Provides the camera's audio signal to a speaker or stereo.
7. GPIO: This is a 6-PIN connector including the Digital output/input, DC output and GROUND items for
connecting with external devices.
8. USB port: The user can use a USB device cable to connect the IP camera to the USB port on the PC.
9. SD/ SDHC CARD slot: This is used for updating system software and archiving / accessing critical
images.
10. RESET: Recover to factory default.
4
1 2
3
4 5 6
7
8
9
10
Quick Setup Guide
Advertisement
