Section 3: Getting To Know Your Child Restraint - RECARO Performance BOOSTER Instruction Manual

Section 3: Getting to Know Your
Child Restraint
This child restraint system is known as a high back belt-
positioning booster seat. A high back belt-positioning booster
seat is designed for use with your vehicle's lap and shoulder
(3-point) seat belt system.
A high back belt-positioning booster helps to locate the vehicle
seat belt system properly across a child who has out-grown
both an infant carrier and a convertible seat. Vehicle seat belts
are designed to protect adults and when used on a child without
a belt-positioning booster, they can do more harm than good.
The information below shows the size of the child suitable for
the child restraint. You must check if your child meets ALL of the
height and weight limitations in order for it to be safe for the child
to use the child restraint.
NOTE: If your child does NOT meet ALL of the height and
weight requirements for the Performance BOOSTER /
ProBOOSTER XL, please see the other fine child restraint
systems that are offered by RECARO.
A child CAN use this child restraint ONLY if:
• The child's weight is between 30 and
120 pounds (13.6 and 54.4 kg), and
• The child's standing height is between
37 and 61 inches (94 and 154 cm).
NOTE: Standing height measures the
child's full height to the top of their head.
The child should be standing up straight
when measured to ensure an accurate
measurement.
8