Section 13: Troubleshooting - RECARO Performance BOOSTER Instruction Manual

Section 13: Troubleshooting

In certain vehicle applications, you may encounter
challenges to safely install and position a child in the restraint
system. If you do not find an adequate solution, call us at
1-888-9RECARO for assistance.
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
The seat belt is twisted.
Unbuckle the seat belt, pull the seat belt away
from the child restraint, remove it from the child
restraint routings and allow it to retract into the
vehicle (it might help to slowly guide it back
into the vehicle's seat belt retractor to prevent
binding). Route the entire seat belt around the
restraint and child once again.
The seat belt is not tight around the child.
Press downward on the child restraint and firmly
pull all slack out of the seat belt. This will allow
the child restraint to compress the vehicle's seat
and allow the seat belt to be further tightened.
The child restraint is not stable when driving.
Check to see if there are items under the
booster. Remove anything found. Some vehicle
seats are deeply contoured making it difficult
to safely install a child restraint. If the restraint
is not stable due to the vehicle seat cushions,
move it to another seating location. If no seating
location is suitable, the Performance BOOSTER
/ ProBOOSTER XL may not be used in this
particular vehicle.
30 30