Hitachi CMP5000WXJ Service Manual page 55

6.1.4 Display Description of Service Factory Menu
1. In Adjustment Item
1 5 10
1
O F S – S L O T
5
10
Y – D E L A Y
15
16
• Second row / 6th to 16th columns : Display the upper layer of selection item • • • At the Service factory mode
Second row / 6th to 7th columns
Second row / 9th to 16th columns : Display the upper layer of selection item • • • At the RS-232C factory mode
• Second row / 19th to 20th columns : Current color mode setting
• Second row / 22th to 23th columns : Current slot type
Slot Type or
At CMPAV05 is
Model Type
mounted with
Display
• Second row / 25th to 27th columns : Current function
• Second row / 29th to 32th columns : Current signal mode
• Second row / 32th columns : Current Screen size (Refer to the "classification of input signal" with regard to each numeric value.)
Current signal mode displayes the signal mode of any of mode 03, mode 31, mode E1, mode 61 or mode 71.
Setting
VIDEO
VGA
WVGA
XGA
WXGA
Current signal mode displayes the signal mode of any of mode 12 or mode 13.
HDTV Mode Setting (Integrator Menu)
1080i
1035i
Display in the no signal and non-correspondence signal
Signal Mode Display
FB OUT OF RANGE (The signal that the measurement is impossible with the main microcomputer)
FC OUT OF RANGE (In the video system signal when video signal does not input)
FD OUT OF RANGE (In the non-correspondence signal at DVI input)
FE
OUT OF RANGE (When the measurement is possible with the main microcomputer, and non-correspondence signal that is not applicable to FC and FD)
No signal
FF
• Second row / 33th column : Current input form
Input Form Component
Display #
Non-display excepting above form (blank).
• Second row / 34th to 35th columns : Current color system
Color System
Display
Non-display it (blank) when a case except COLOR SYSTEM mentioned above and COLOR SYSTEM setting is fixed.
• 15th row / 6th to 24th columns : Current item selection
• 15th row / 26th to 35th columns :
RANGE CHECK selection
1. At REFERENCE selection
2. At OFFSET selection
3. At VIDEO OPTION selection : No display
At INITIALIZE selection
15 20 25
# 1 – S 1 – I N 4 – 0
:
: Display the ID No. • • • At the RS-232C factory mode
No SLOT
S1 NO
Signal Mode Display
Signal Mode Display
Video–RGB Composite
@
NTSC PAL SECAM
NT PL SC
: Current selecting value
: Adjustment value
: OFFSET value ( adjustment value)
: The setting that is selected. (There is no display in the item which there is the lower layer.)
30 35 40
4 – 2 N T
Display color : White
Halftone
When there is not item which is applicable to the input
signal mode, display the adjustment value
with "––––––" (–––––––)", and perform the item
indication color to gray.
( )
03
31
E1
61
71
12
13
Signal Definition
Y/C
* /
4.43NTSC PAL-M
4N PM
* Adjustment value is REFERENCE value + OFFSET value.
: Blue (second row/15th row
for each 5 to 36 columns)
PAL-N BLACK/WHITE
PN BW
71